2N IP Verso 25-Degree Wedge Backplate for 2 Modules, 01940-001

2N IP Verso Wedge Backplate for 2 Modules

The 2N IP Verso Wedge Backplate for 2 Modules is a wall-mount backplate that tilts a double-module Verso intercom by 25°. Turning the intercom toward the approach path gives its camera a better view of the area in front of the door, which helps where the unit sits on the same wall as the entrance or on a wall at an angle to it. It is for surface installation only and can be tilted to the left or the right.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Where the Wedge Helps

A flat wall mount points the camera straight out. When the door is on the side or the approach runs along the wall, the 25° tilt turns the unit toward the visitor. 2N notes that the plate leaves room for cabling behind the intercom, and that it can be used outdoors.

Compatible Products

2N lists the wedge backplate for the following intercom families, available at Affinitech Store. It only suits builds with two modules:

• 2N IP Verso 2.0 Main Unit with Camera and 1 Button, Nickel (02907-001)
• 2N IP Verso 2.0 Main Unit with Camera, Black (02908-001)
• 2N IP Verso 2.0 Audio-Only Main Unit, Nickel (03482-001)
• 2N IP Verso 2.0 Audio-Only Main Unit, Black (03483-001)
• 2N IP Verso Main Unit without Camera (01271-001)
• 2N IP Verso Main Unit without Camera, Black (01272-001)
• 2N IP Verso Main Unit with Camera (01273-001)
• 2N IP Verso Main Unit with Camera, Black (01274-001)
• 2N LTE Verso Intercom Main Unit with Camera, Black (01791-001)
• 2N LTE Verso Intercom Main Unit with Camera, Nickel (01792-001)

2N also files the original 2N IP Verso under its discontinued products.

Related Products

Other 2N IP Verso and IP Solo parts: 2N IP Solo Wedge Backplate (02077-001) for the single-module Solo, and the 2N IP Verso Security Bundle (01975-001).

Explore More

• Browse all Access Control products at Affinitech Store
• See Network Door Stations and Intercoms

Frequently Asked Questions About 2N IP Verso Wedge Backplate for 2 Modules

What does the 2N IP Verso wedge backplate do?

It mounts a two-module Verso intercom on the wall at a 25-degree angle so the camera looks further along the approach to the door.

Which intercoms does it fit?

2N lists it for the 2N IP Verso 2.0, the original 2N IP Verso and the 2N LTE Verso, in their double-module versions for surface installation.

Can I use it with flush-mounted units?

No. 2N states it is only for surface installation of the double-module versions.

Can it be tilted to either side?

Yes, 2N describes it as universal: it can be tilted to the left or to the right.

Is it suitable for outdoor use?

Yes, 2N lists it as suitable for outdoor installation.

Is there a wedge for the single-module IP Solo?

Yes, a separate 2N IP Solo wedge backplate exists (02077-001); it is not interchangeable with this two-module plate.