2N IP Verso 2x3-Module Surface Backplate, 01298-001

2N IP Verso 2x3-Module Surface Backplate

The 2N IP Verso 2x3-Module Surface Backplate (01298-001) is a surface-mounting backplate for a block of two modules wide by three high of the 2N IP Verso family, made for walls where a normal flush or frame installation does not work. 2N lists its backplates for glass and uneven surfaces. The plate gives the modules a flat base, and the part is part of the first-generation IP Verso accessory range, which 2N also lists as compatible with the 2N Access Unit 2.0 and Access Unit QR.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Where This Plate Fits

• The module layout is 2 wide x 3 high, using 2N’s width-by-height naming.
• 2N positions the backplates for glass or uneven surfaces, so the mounting surface can be less than perfectly flat.
• It is a surface part: the intercom sits on the wall and nothing is recessed, so no flush box is needed.
• The range runs from one module up to a 3 x 3 block, so match the plate to the number of modules in your build before ordering.

Compatible Products

2N lists the IP Verso accessories for these products, available at Affinitech Store:

• 2N IP Verso Main Unit without Camera, Nickel
• 2N IP Verso Main Unit without Camera, Black
• 2N IP Verso Main Unit with HD Camera, Nickel
• 2N IP Verso Main Unit with HD Camera, Black
• 2N Access Unit 2.0 125 kHz RFID Reader
• 2N Access Unit 2.0 Touch Keypad Reader
• 2N Access Unit 2.0 Bluetooth and RFID Reader
• 2N Access Unit QR Code Reader, Nickel

Related Products

Other 2N IP Verso mounting parts, available at Affinitech Store:

• 2N IP Verso 1-Module Surface Backplate
• 2N IP Verso 2-Module Surface Backplate
• 2N IP Verso 3-Module Surface Backplate
• 2N IP Verso 2x2-Module Surface Backplate
• 2N IP Verso 25-Degree Wedge Backplate for 2 Modules (01940-001)

Explore More

• Browse all Access Control products at Affinitech Store
• See Network Door Stations and Intercoms

Frequently Asked Questions About 2N IP Verso 2x3-Module Surface Backplate

What is this part?

A surface backplate for a block of two modules wide by three high of the 2N IP Verso family. It is the base the modules are fixed to when the unit is installed on the wall surface.

Is it meant for glass or uneven walls?

Yes. 2N lists its IP Verso backplates for installing on glass or uneven surfaces.

How many modules does it hold?

2 wide x 3 high (6 modules in total). Plates are sold in sizes from one module to a 3 x 3 block.

Which products is it listed for?

2N states that the IP Verso accessories are compatible with the 2N Access Unit 2.0 and the 2N Access Unit QR, and the plate is part of the first-generation IP Verso range.

Does it fit the IP Verso 2.0?

The 2N accessory page we checked names the Access Unit 2.0 and Access Unit QR, not the IP Verso 2.0, so this page does not claim it. Ask us to confirm before ordering for a 2.0 project.

What are the shipping size and weight?

The carton is 13.98 x 12.80 x 1.18 in and weighs 2.14 lb. This is packaging data, not the size of the plate.