2N Access Unit 2.0 Fingerprint Reader, 02263-001

2N Access Unit 2.0 Fingerprint Reader – FBI-Certified Fingerprint Sensor

The 2N Access Unit 2.0 Fingerprint Reader (02263-001) is a fingerprint access reader with a built-in door controller from the 2N Access Unit 2.0 family. This 2N Access Unit 2.0 variant opens the door with a fingerprint instead of a card or code. A 2N-listed optical sensor sits behind resistant glass, rejects fake fingerprints, and the unit doubles as the door controller, so a single cable can power and connect it. It runs on PoE or a 12 V DC supply and mounts flush or on the surface in a nickel or black zinc frame.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Why Choose the 2N Access Unit 2.0?

• Reader and controller in one unit, so a basic door needs only a network cable and a lock wire
• FBI-certified fingerprint sensor that rejects fake fingerprints
• One of the 2N Access Unit 2.0 family, which takes all 2N IP Verso extension modules
• PoE or 12 V DC power with a built-in tamper switch and two inputs
• IP54 cover and IK08 impact rating with -40 °C to 60 °C operation
• Zinc cast frame in nickel or black, flush or surface mounted
• 5-year warranty stated by 2N

Reader and Controller in One Housing

Instead of a reader that depends on a separate controller box, the Access Unit 2.0 carries the controller inside. You wire the lock, exit button and door contact to it and connect it to the IP network. For a door that needs more, 2N IP Verso extension modules such as an I/O module, Wiegand module or additional reader modules can be added to the unit.

Fingerprint Access

An optical sensor behind resistant glass reads the finger, and 2N specifies fake-fingerprint detection, water and dust resistance and FBI certification. The sensing area is 15.24 x 20.32 mm. 2N does not publish a template capacity for this reader on its product pages.

Mounting and Installation

Choose a flush frame, which protrudes about 5 mm from the wall, or a surface frame. Adhesive mounting on glass is also listed. Single-module frame sizes are 107 x 130 x 28 mm for surface mounting and 130 x 153 x 5 mm for flush mounting, and the flush box needs a minimum hole of 108 x 131 x 45 mm.

Typical Applications

• Family homes and small residences
• School and office doors
• Rooms where lost cards are a problem
• Cardless staff entrances

Compatible Accessories

Compatible accessories for the 2N Access Unit 2.0, available at Affinitech Store:

• 2N IP Verso 1-Module Flush Frame, Nickel
• 2N IP Verso 1-Module Flush Frame, Black
• 2N IP Verso 1-Module Surface Frame, Nickel
• 2N IP Verso 1-Module Surface Frame, Black
• 2N IP Verso 1-Module Flush Box
• 2N IP Verso 1-Module Backplate
• 2N Security Relay
• 2N Magnetic Door Contact
• 15 W 1-Port PoE Midspan (T8120)

Compare 2N Access Unit Readers

Explore More

• Browse all Access Control Readers at Affinitech Store
• See the full Access Control collection
• See Network Door Stations and Intercoms

Frequently Asked Questions About 2N Access Unit 2.0 Fingerprint Reader

What is the 2N Access Unit 2.0 fingerprint?

It is the fingerprint version of 2N's second-generation Access Unit, order number 02263-001, with a built-in door controller.

What credentials does this reader accept?

Fingerprints.

Does it need a separate controller?

No. The reader is also the controller. You connect the lock, exit button and door contact to it and join it to the IP network.

Is the fingerprint sensor certified?

2N lists the sensor as FBI-certified, with fake-fingerprint detection and water and dust resistance.

How is the unit powered?

By PoE (IEEE 802.3af, Class 0, 12.95 W) or a 12 V / 3 A DC supply, or both.

Can it be used outdoors?

The cover is rated IP54 and IK08 and the unit operates from -40 °C to 60 °C at 10 to 95 percent humidity, non-condensing.

How does it mount?

Flush (about 5 mm protrusion), on the surface, or with adhesive on glass, using nickel or black frames. A one-module flush frame measures 130 x 153 x 5 mm.

Can I add modules to it?

2N states that the Access Unit 2.0 supports all 2N IP Verso modules, including keypad, fingerprint, I/O module and Wiegand module.

What does the door relay support?

A passive NO/NC switch rated 30 V, 1 A AC/DC and an active output of 8-12 V DC at up to 600 mA, plus two inputs and a built-in tamper switch.

Which generation is it?

It is a 2N Access Unit 2.0 reader. It is not the same product as the first-generation Access Unit or the slimmer 2N Access Unit M, so check accessories against the 2.0 family.

What warranty does it have?

2N states a 5-year warranty on the Access Unit 2.0 family; details are at 2n.com/warranty.