2N IP Verso Black 1-Module Flush Frame, 01279-001
Description
2N IP Verso 1-Module Flush Frame, Black
The 2N IP Verso 1-Module Flush Frame in black is the trim that finishes a one-module opening installed in the wall. 2N makes the frame wider than the cut-out so it hides the uneven edge of a drilled hole. It is installed over the 1-module flush-mounting box (01284-001) and is meant for a stand-alone extension module, such as a separate reader. A main unit needs the 2-module frame instead.
Key Specifications
| Part number | 01279-001 |
| Type | Flush (in-wall) mounting frame |
| Size | 1 module (stand-alone extension module) |
| Finish | Black |
| Mounting | In-wall, over a flush-mounting box |
| Required box | 01284-001 |
| Compatible with | IP Verso 2.0, IP Verso, LTE Verso, Access Unit 2.0 |
| Shipping dimensions | 6.65 x 6.42 x 0.98 in |
| Shipping weight | 0.88 lb |
Full specifications are listed in the Detailed Specifications tab.
Installation Overview
Following the 2N manual: cut the opening, set the flush box so its edges overlap the wall surface, wall it in and break off the side stops once the material has hardened. Install the device, check the frame sealing, hang the frame on its top hook and tighten it at the bottom, then seal the frame with universal or sanitary silicone that is inert to the wall material and resistant to UV and water. Keep silicone off the marked areas, especially the underside of the device.
Compatible Products
Compatible 2N intercoms available at Affinitech Store:
- 2N IP Verso 2.0 Main Unit with Camera, Nickel (02907-001)
- 2N IP Verso 2.0 Main Unit with Camera, Black (02908-001)
- 2N IP Verso 2.0 Audio-Only Main Unit, Nickel (03482-001)
- 2N IP Verso 2.0 Audio-Only Main Unit, Black (03483-001)
- 2N LTE Verso Main Unit with Camera, Black (01791-001)
- 2N LTE Verso Main Unit with Camera, Nickel (01792-001)
- 2N IP Verso Main Unit with Camera (01273-001)
- 2N IP Verso Main Unit without Camera (01271-001)
Related Products
Matching boxes and sibling frames available at Affinitech Store:
- 2N IP Verso 1-Module Flush Box (01284-001)
- 2N IP Verso 1-Module Flush Frame, Nickel (01278-001)
- 2N IP Verso 2-Module Flush Frame, Nickel (01280-001)
- 2N IP Verso 2-Module Flush Frame, Black (01281-001)
Explore More
- Browse Readers at Affinitech Store
- Browse all Access Control products at Affinitech Store
- See Network Door Stations and Intercoms
Frequently Asked Questions About 2N IP Verso 1-Module Flush Frame, Black
What is this frame for?
It is the in-wall trim that finishes a 2N IP Verso flush installation, covering the rough edge of the cut-out.
Which flush box does it need?
The 1-module flush box, 01284-001.
Is it for the main unit?
No. 2N says the 1-module frame is for stand-alone extension modules; a main unit needs the 2-module frame.
What finish is it?
Black.
Which 2N products does it fit?
2N lists IP Verso 2.0, the first-generation IP Verso, LTE Verso and Access Unit 2.0.
Do I need silicone?
2N recommends sealing the frame with universal or sanitary silicone that is inert to the surface and UV- and water-resistant.
Are the frame dimensions published?
2N shows frame and wall-cutout dimensions in diagrams in its manual; the product page lists no dimensions in text.
Detailed Specifications
2N IP Verso 1-Module Flush Frame, Black Specifications
| Specification | Details |
|---|---|
| Product | |
| Model | 2N IP Verso 1-Module Flush Frame, Black |
| Order number | 01279-001 |
| Type | Flush-mounting frame for 2N IP Verso modules |
| Key Specifications | |
| Frame size | 1 module |
| Finish | Black |
| Mounting method | Flush (in-wall), over a flush-mounting box |
| Required flush box | 01284-001 |
| Intended use | Stand-alone extension modules such as an OUT reader |
| Frame design | Wider than the cut-out to cover uneven edges of the drilled hole (per 2N) |
| Compatibility | |
| Compatible products | 2N IP Verso 2.0; 2N IP Verso (first generation); 2N LTE Verso; 2N Access Unit 2.0 |
| Installation | Install the flush box first, wall it in, then hang the frame on its top hook and screw it at the bottom; seal with inert, UV- and water-resistant silicone (2N manual) |
| Shipping | |
| Shipping weight | 0.88 lb |
| Shipping dimensions (package) | 6.65 x 6.42 x 0.98 in |
| EAN / UPC | 8595159509419 |