2N IP Verso Nickel 2-Module Flush Frame, 01280-001

Brand: 2N
SKU:
01280-001
Condition:
New
(No reviews yet) Write a Review
Contact us for a Quote Today!
  • 2N IP Verso Nickel 2-Module Flush Frame, 01280-001
  • 2N IP Verso Nickel 2-Module Flush Frame, 01280-001
Price: $99.00

Description

2N IP Verso 2-Module Flush Frame, Nickel

The 2N IP Verso 2-Module Flush Frame in nickel is the trim that finishes a two-module intercom opening installed in the wall. 2N makes the frame wider than the opening so it hides the rough edges of a drilled hole. It is installed over a flush-mounting box (01285-001) and is the frame that a 2N IP Verso main unit needs; add or remove modules by choosing the frame and box size to match.

Key Specifications

Part number 01280-001
Type Flush (in-wall) mounting frame
Size 2 modules (main unit plus one module)
Finish Nickel
Mounting In-wall, over a flush-mounting box
Required box 01285-001
Compatible with IP Verso 2.0, IP Verso, LTE Verso
Shipping dimensions 10.63 x 6.46 x 0.91 in
Shipping weight 1.32 lb

Full specifications are listed in the Detailed Specifications tab.

Installation Overview

Following the 2N manual: cut the opening, set the flush box so its edges overlap the wall surface, wall it in and break off the side stops once the material has hardened. Install the device, check the frame sealing, hang the frame on its top hook and tighten it at the bottom, then seal the frame with universal or sanitary silicone that is inert to the wall material and resistant to UV and water. Keep silicone off the marked areas, especially the underside of the device.

Compatible Products

Compatible 2N intercoms available at Affinitech Store:

Related Products

Matching boxes and sibling frames available at Affinitech Store:

Explore More

Frequently Asked Questions About 2N IP Verso 2-Module Flush Frame, Nickel

What is this frame for?

It is the in-wall trim that finishes a 2N IP Verso flush installation, covering the rough edge of the cut-out.

Which flush box does it need?

The 2-module flush box, 01285-001.

Is it for the main unit?

Yes. 2N states that a main unit needs the 2-module frame.

What finish is it?

Nickel.

Which 2N products does it fit?

2N lists IP Verso 2.0, the first-generation IP Verso, LTE Verso.

Do I need silicone?

2N recommends sealing the frame with universal or sanitary silicone that is inert to the surface and UV- and water-resistant.

Are the frame dimensions published?

2N shows frame and wall-cutout dimensions in diagrams in its manual; the product page lists no dimensions in text.

View AllClose

Detailed Specifications

2N IP Verso 2-Module Flush Frame, Nickel Specifications

SpecificationDetails
Product
Model2N IP Verso 2-Module Flush Frame, Nickel
Order number01280-001
TypeFlush-mounting frame for 2N IP Verso modules
Key Specifications
Frame size2 modules
FinishNickel
Mounting methodFlush (in-wall), over a flush-mounting box
Required flush box01285-001
Intended useMain unit installations (a main unit requires the 2-module frame)
Frame designWider than the cut-out to cover uneven edges of the drilled hole (per 2N)
Compatibility
Compatible products2N IP Verso 2.0; 2N IP Verso (first generation); 2N LTE Verso
InstallationInstall the flush box first, wall it in, then hang the frame on its top hook and screw it at the bottom; seal with inert, UV- and water-resistant silicone (2N manual)
Shipping
Shipping weight1.32 lb
Shipping dimensions (package)10.63 x 6.46 x 0.91 in
EAN / UPC8595159503844
View AllClose

Additional Information

Data Sheet:
View AllClose