LenelS2 LNL-X3300 Intelligent System Controller – powered by12 or 24 VDC

The LNL-X3300 Intelligent System Controller (ISC) is designed for advanced access control applications. As the access control engine for the OnGuard® system, the ISC provides power and functionality. The ISC can communicate to the host computer in a single- or dual-path Ethernet configuration. Multiple combinations of Input Control Modules, Output Control Modules, and Card Reader Interface Modules (up to 64 devices) can be configured.

Utilizing its native Ethernet communications and an advanced 32-bit processor, the LNL-X3300 can communicate upstream to the host computer through its primary Ethernet port, with throughput up to 8 times greater than the fastest serial connections. Additionally, the LNL-X3300 offers an optional secondary communications option, through a USB to Ethernet connection.

The LNL-X3300 can store up to 500,000 cardholders in nonvolatile flash memory, and supports selective download for larger cardholder databases. The two downstream RS-485 2-wire ports can be used to connect up to 64 devices (64 doors) in many combinations of LNL-1100, LNL-1200, LNL1300, and LNL-1320 as well as to older devices like the LNL500B and LNL-500W modules.

Features & Functionality

• DHCP and fixed-IP addressing supported
• DNS device naming through DHCP extended commands
• Optional Secondary NIC, USB port (2.0) with optional adapter
• 15 MB of available on-board, non-volatile flash memory
• Battery-backed, non-volatile storage of 50,000 events
• Configurable option for Data-at-Rest encryption
• Firmware stored in flash memory, background download of firmware updates supported
• 12 or 24 VDC input power
• Supports up to 16 badge formats
• Biometric template storage support
• Up to 32,000 access level permissions
• 255 holidays with grouping
• 255 timezones, each with 6 intervals
• Elevator control support for up to 128 floors
• Supports up to 9-digit user PIN codes
• Status LEDs for heartbeat & battery status, upstream and downstream communication, and memory write status
• Two dedicated inputs for tamper and power failure status
• Advanced Encryption Standard (AES) 256-bit algorithm for communication to LenelS2 Series 3 reader and I/O modules; AES 128 bit encryption with LenelS2 Series 2 reader and I/O modules
• ES128 or TLS 1.2 (with AES256 support) communication to OnGuard