Hall Research USB 2.0 over UTP Extender with Wall Plate Local Side, U2-160-DP

This USB 2.0 Extender is capable of sending USB signals across a Cat5e/6 cable up to 50 meters at data rates of High Speed (480 Mb/s), Full Speed (12Mb/s), or Low Speed (1.5 Mb/s). The Host (PC) side comes as a wall plate with Decora® form factor and requires no power supply, the Remote (device) side is a small module with a Type-A USB connector to which you can plug virtually any USB device. A power supply is provided for connection to the remote end.

Hall Research’s USB 2.0 extender can extend broad range of USB devices like web camera, printer, keyboard, mouse, disk drives and webcams over 165 ft (50 m) using single Cat 6 cable.

Features

• Allows any USB device to be remotely located by up to 50m (164 ft) using Cat6 UTP cable
• Plug-and-Play. No software or drivers needed
• Support for high-speed (480 Mb/s), full-speed (12 Mb/s) or low speed (1.5 Mb/s) USB device
• Host side comes as a Decora® wall-plate
• Supports Hot Plug/Unplug
• Economical

Specifications

• Local unit:
  Upstream Port: USB type B Female 
  Downstream Port: RJ45 Jack 
  Power: Bus Powered
• Remote Unit:
  Downstream Port: USB type A Female 
  Power: External 5V Supply
• Dimensions:
  Local: 4.56 x 2.7 x 1.8 inch (114 x 69 x 46 mm)
  Remote: 2.6 x 1.4 x 0.8 inch (66 x 36 x 20 mm)
• Interconnect Cable:
  Standard category 5e/6 UTP or STP
  CAT6 Recommended
• Max Cable Length:
  50 m (164 ft)
• Power Supply:
  Universal AC input, 5vDC @ 2A output
  Hall Research P/N 511-PA1015-1L
• Operating Temperature:
  32 to 150 °F (0 to 65 °C)

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.