Hall Research Video over UTP sender and local port, UV1-SL

The UV1-SL converts a VGA signal into a Cat5 and sends this Cat5 signal to one of the following devices: (UV1-R and UV1-R-WP). The UV1-SL also has a loop-thru VGA port for a local monitor. The UV1-SL is supplied phantom power via the Cat5 from the receiving unit or from a local power supply. The UV1-SL can be located up to 500 feet (150 meters) from the sending unit with little to no degradation of video quality.

Features

• Local VGA port available for local display
• Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
• Amplifies the signal for clean and crisp transmission
• Differential signaling eliminates ground loops and noise
• Handles resolutions up to 1920x1440 at 60Hz
• Rugged, Reliable, Compact size
• Drive standard CAT5 cables to 500 feet for (VGA and Component Video) or to 2000 feet for (Composite Video + Audio)

Specifications

• Dimensions:
  UV1-Sender & UV1-Receiver MiniCat®
  0.8" H x 1.7" W x 4.5" D
• Weight:
  2 lbs. (shipping)
• Power Supply:
  From utility-power (mains) outlet, through included external power adapter. Output Voltage: 6v to 9v DC Center-Positive. Current requirement 500 ma max
• Max Distance:
  Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio models
• Resolution:
  Up to 1920x1440 non-interlaced at 60Hz
• Standards:
  VGA, SVGA, XGA, or UXGA video
• Video types:
  VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.