Hall Research
Hall Research Video and Phantom Power over UTP Extender, UV4-S
- SKU:
- UV4-S
- Condition:
- New
- Availability:
- Lead Times May Vary, Please Contact Us
Description
Hall Research Video and Phantom Power over UTP Extender, UV4-S
The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor. The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-GS569). Made in the USA.
Features
- Support for local monitor at transmitter
- Multiple Cat-5 outputs
- Transmit video and phantom power on a single CATx cable
- Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
- Amplifies the signal for clean and crisp transmission
- Differential signaling eliminates ground loops and noise
- Handles resolutions up to 1920x1440 at 60Hz
- Rugged, Reliable, Compact size
- Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
- Drive standard CATx cables to 500 feet for VGA and Component Video
Specifications
- Video Gain:Unity
- Standards:VGA, SVGA, XGA, or UXGA video
- Video Types:VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
- Resolution:Up to 1920x1200 and 1080p at 500 ft
- Video # and Type:1 analog signal input. Standard VGA output RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync)
- Connectors:4 or 8 female RJ-45 output
1 HD15 video input
1 HD15 local video output - Nominal Amplitude:1 V p-p for Y of component video
0.7 V p-p for RGB and for Pr and Pb of component video
4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS - Impedance:75 Ohms
- Max Distance:Up to 500 ft. (150 m) for VGA and Component Video
- Sync Polarity:Positive or Negative
- Power Supply:100 VAC to 240 VAC, 50-60 Hz, external; 9 VDC regulated, Center Positive
- Recommended Cable:Hall Research. Zero-Skew™
- Temp/Humidity:Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing - Enclosure:Steel
- Dimensions:1.66" H x 8.42" W x 2.60" D
(42.2mm H x 214mm W x 66mm D)
Depth excludes connectors - Shipping Weight:3.0 lbs (1.36 kg)
- Vibration:ISTA 1A in carton (International Safe Transit Association)
- Safety:CE
- EMI/EMC:CE, FCC Class A
- MTBF:90,000 hours (Calculated Estimate)
About Hall Research
Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.