Pelco SWM-GY Compact Wall Mount for Small Pendant Domes, Gray

Pelco SWM-GY Compact Wall Mount for Small Pendant Domes, Gray

The Pelco SWM-GY is a compact cast aluminum indoor/outdoor wall mount for lightweight Pelco pendant domes that use a 1.5-inch NPT thread. Its mounting bolts are hidden inside the mount for a clean look, a base gasket keeps moisture out and a feedthrough opening routes video and power cables. It supports up to 10 lb and can be pole-mounted with the SWM-PA-GY pole adapter. For heavier Spectra PTZs use the 75 lb IWM-GY.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Fasten the supplied mounting plate to a vertical load-bearing surface with two fasteners up to 1/4-inch (M6) diameter (not supplied), slide the mount over the plate and lock it with the set screw, then thread the dome onto the 1.5-inch NPT opening. The compact mount is not suitable for conduit fittings.

Compatible Cameras

• Pelco Spectra pendant domes (up to 10 lb)
• Pelco DF5 Series pendant domes
• Pelco Sarix ID Series pendant domes (with ID-P adapter)
• Pelco Sarix IE Series pendant domes (with IE-P adapter)

Check that the dome weighs 10 lb or less; most current Spectra PTZs exceed this and need an IWM Series mount.

Related Products

• Pelco SWM-PA-GY Pole Adapter for SWM, Gray
• Pelco IWM-GY Wall Mount, Gray
• Pelco MRCA Ceiling Mount Adapter
• Pelco WMVE-SW Wall Mount, White

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco SWM-GY

What cameras does the SWM-GY fit?

Pelco pendant domes in the Spectra, DF5 and Sarix ID and IE Series, and other pendant domes with a 1.5-inch NPT thread, as long as they weigh 10 lb or less. Sarix ID needs the ID-P adapter and Sarix IE needs the IE-P adapter.

What is the load capacity?

The SWM-GY supports up to 4.5 kg (10 lb).

Can it be used outdoors?

Yes. It is an indoor/outdoor mount with a gasket on the base to protect the interior from moisture.

Can I use conduit with the SWM-GY?

No. Because of its compact size it is not suitable for conduit fittings. Cables pass through the feedthrough opening in the mounting surface.

Can it be mounted on a pole?

Yes, with the SWM-PA-GY pole adapter, which straps to 4 to 8 inch poles. Pelco also offers SWM-CA corner adapters.