Pelco WMVE-SW Indoor Pendant Wall Mount, 1.5-Inch NPT, White

Pelco WMVE-SW Indoor Pendant Wall Mount, 1.5-Inch NPT, White

The Pelco WMVE-SW is a white (RAL 9003) aluminum wall mount for Pelco indoor pendant cameras, supplied with a 1.5-inch to 3/4-inch NPT adapter. Pelco designed it for Next Generation Sarix Enhanced indoor models and the IMEx19-1P and IMPBB-P indoor pendant mounts. Wiring routes through the back of the mount or through the 3/4-inch conduit access under the arm, and the PA101 adapter converts it to a pole mount. The light gray environmental version is the WMVE-SR.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Attach the supplied gasket, then fasten the mount to the wall with at least two 1/4 in fasteners (not supplied). Route wiring through the back or the bottom conduit access. Use the included 1.5 in to 3/4 in NPT adapter and nut for 3/4 in NPT pendants, apply anti-seize lubricant, thread on the pendant and lock it with the setscrew.

Compatible Products

• Pelco Next Generation Sarix Enhanced indoor pendant cameras
• Pelco IMEx19-1P indoor pendant
• Pelco IMPBB-P indoor pendant back box

Related Products

• Pelco WMVE-SR Wall Mount, Light Gray
• Pelco PA101 Pole Mount Adapter
• Pelco PA101-SW Pole Mount Adapter, White
• Pelco IWM-SW Wall Mount, White
• Pelco IWM-GY Indoor/Outdoor Wall Mount for Pendant Dome Cameras

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco WMVE-SW

Which cameras does the Pelco WMVE-SW fit?

Pelco designed it for Next Generation Sarix Enhanced indoor pendant models and the IMEx19-1P and IMPBB-P indoor pendant mounts.

What thread sizes does it support?

The arm is 1.5 inch NPT, and a 1.5 inch to 3/4 inch NPT adapter with a 3/4 inch NPT nut is included.

What color is it?

White polyester powder coat, RAL 9003.

Can it be pole mounted?

Yes, with the PA101 pole mount adapter.

What is included?

The wall mount, a 1.5 inch to 3/4 inch NPT adapter, a 3/4 inch NPT nut, anti-seize lubricant, a wall mount gasket and the installation manual. Fasteners are not supplied.