Pelco WMVE-SR Pendant Wall Mount, 1.5-Inch NPT, Light Gray

Pelco WMVE-SR Pendant Wall Mount, 1.5-Inch NPT, Light Gray

The Pelco WMVE-SR is a light gray aluminum wall mount with a 1.5-inch NPT arm for Pelco environmental pendant cameras and pendant mounts. Pelco designed it for Next Generation Sarix Enhanced environmental models and the IMEx19-1VP, IMEx19-1EP, IM-VEPM, IMPBB-EP, IE-P and Camclosure 2 Series pendant mounts. Wiring routes through the back of the mount or through the 3/4-inch conduit access under the arm. Add the PA101 for pole installs or the IMM-CM for outside corners; the white indoor version is the WMVE-SW.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Use the mount as a template and fasten it with at least two 1/4 in fasteners (not supplied); stick the supplied gasket to the back first. Route wiring through the back or thread a 3/4 in conduit fitting into the bottom of the arm. Apply the supplied anti-seize lubricant, screw the pendant onto the arm and lock it with the setscrew using a 5/64 in hex key. Seal fastener holes outdoors.

Compatible Products

• Pelco Next Generation Sarix Enhanced environmental pendant cameras
• Pelco IMEx19-1VP pendant
• Pelco IMEx19-1EP pendant
• Pelco IM-VEPM pendant mount
• Pelco IMPBB-EP pendant back box
• Pelco IE-P pendant mount
• Pelco Camclosure 2 Series pendant mounts

Related Products

• Pelco WMVE-SW Wall Mount, White
• Pelco PA101 Pole Mount Adapter
• Pelco IMM-CM Corner Mount Adapter
• Pelco IWM-GY Indoor/Outdoor Wall Mount for Pendant Dome Cameras
• Pelco IWM-SR Wall Mount

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco WMVE-SR

Which cameras does the Pelco WMVE-SR fit?

Pelco designed it for Next Generation Sarix Enhanced environmental pendant models and the IMEx19-1VP, IMEx19-1EP, IM-VEPM, IMPBB-EP, IE-P and Camclosure 2 Series pendant mounts.

What thread size is the mount arm?

The arm takes a 1.5 inch NPT pendant.

Can it be used outdoors?

Yes. It is an environmental mount for indoor and outdoor installs; seal the fastener holes outdoors.

Can I mount it on a pole or corner?

Yes. Use the PA101 pole mount adapter for poles or the IMM-CM outer corner mount adapter for building corners.

What is included?

The wall mount, a wall mount gasket, a tube of anti-seize lubricant and the installation manual. Fasteners are not supplied.