Hall Research VGA & Bi-Directional RS-232 Sender and Receiver Kit, UV232B

(No reviews yet) Write a Review
Lead Times May Vary, Please Contact Us
MSRP: $425.00
Price: $403.75
— You save $21.25
Frequently bought together:


Hall Research VGA & Bi-Directional RS-232 Sender and Receiver Kit, UV232B

The Model UV232B Kit is used to send high resolution video and full-duplex RS-232 over a single twisted-pair cable to a remote location up to 500 feet away.

The input video can be from a RGBHV (PC video to WUXGA) or YPbPr (HD analog component to 1080p).

DDC compliant EDID emulation assures proper PC boot-up with video output.

The Bi-directional RS-232 can be used to control LCD’s or Projectors that have RS-232 control, or connect to a compatible touch-screen LCD.

Applications include kiosk solutions, conference halls, digital signage, interactive operator systems, factory or laboratory data acquisition and control, and more.

When the Sender is powered from a VESA compliant VGA source (+5v on Pin 9) a power supply (included) is only required at the Receiver.
If the source is not VESA compliant in that regard, or if the video is YPbPr (using a 3 RCA to HD15 input cable), then a power supply (included) is needed at both Sender and Receiver.

The kit includes a local unit (Sender) that includes a VGA & serial cables, plus a remote unit (Receiver) with two power supplies.

It is recommended that for best image quality low-skew UTP cables be utilized (such as Hall Research’s Zero-Skew cables), otherwise at long distances (>200ft) and high-resolutions, RGB skew may be present and a separate skew corrector would be necessary (HRT Model SKU-RGB).


  • Sends PC or HD video and bi-directional RS-232 over single Catx
  • Wide bandwidth to transmit WUXGA signals (1920x1200 / 60hz) or HD Analog Component (1080p)
  • Compensation for UTP cable to 500 ft
  • No power supply required at local sender - when powered from VESA compliant VGA Source
  • DDC compliant EDID emulation on the Sender
  • Supports all baud rates to 115 Kbps
  • Perfect for touch-screen, Kiosk, or Projector Control applications
  • RS-232 and high quality VGA input cables provided
  • Compact metal enclosure with mounting provisions
  • Compact, Rugged, Reliable, and Economical
  • Made in USA


  • Standards:
    Analog VGA Video (RGBHV), YPbPr, or RGB signals with sync-on-green.
  • Resolutions:
    All up to WUXGA (1920x1200/60 Hz, YPbPr Analog Component upto 1080p
  • Video Level:
    0.7 v p-p on RGB, 5v p-p H/V sync
  • Bandwidth:
    20 Hz to 450 MHz
  • Common Mode Noise Rejection:
    100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
  • Max Distance:
    Up to 500 ft. (152 meters) based on resolution
  • Temperature:
    Operating: 32 to 122 Deg F (0 to 50 Deg C);
    Storage: -40 to +185 Deg F (-40 to +85 Deg C)
  • Enclosure:
  • MTBF:
    100,000 hours (calculated estimate)
  • Power:
    Via the included power adapter. Voltage: 6v DC Center-Positive. Average Power Consumption: 200mA (Sender) 160mA (Receiver)
  • Size (H x W x D):
    1.25” H x 2.75” W x 3.08” D* Each Device
    *Units have 2 mounting ears that protrude 0.40” beyond the main box on each side.
  • RS232 Connections:
    Pin 2 = RX
    Pin 3 = TX
    Pin 5 = GND 

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.

View AllClose

Warranty Information

  • 2 Year Warranty
  • View AllClose

    0 Reviews

    View AllClose