Hall Research VGA, Audio and Uni-Directional RS-232 Sender, UV232A-S

The Model UV232A Kit is used to send high resolution video, Audio (L+R Mixed) and uni-directional RS-232 over a single twisted-pair cable to a remote location up to 500 feet away.
This is the SENDER part of the kit.

The input video can be from a RGBHV (PC video to WUXGA) or YPbPr (HD analog component to 1080p).

DDC compliant EDID emulation assures proper PC boot-up with video output.

The Uni-directional RS-232 can be used to control LCD’s or Projectors that have RS-232 control.

Applications include kiosk solutions, conference halls, digital signage, interactive operator systems, factory or laboratory data acquisition and control, and more.

When the Sender is powered from a VESA compliant VGA source (+5v on Pin 9)  a power supply (included) is only required at the Receiver. If the source is not VESA compliant in that regard, or if the video is YPbPr (using a 3 RCA to HD15 input cable), then a power supply (included) is needed at both Sender and Receiver.

The kit includes a local unit (Sender) that includes a VGA & serial cables, plus a remote unit (Receiver) with two power supplies.

It is recommended that for best image quality low-skew UTP cables be utilized (such as Hall Research’s Zero-Skew cables), otherwise at long distances (>200ft) and high-resolutions, RGB skew may be present and a separate skew corrector would be necessary (HRT Model SKU-RGB).

Features

• Sends PC or HD video, Audio (L+R Mixed) and Uni-directional RS-232 over single CATx
• Wide bandwidth to transmit WUXGA signals (1920x1200 / 60hz) or HD Analog Component (1080p)
• Compensation for UTP cable to 500 ft
• No power supply required at local sender - when powered from VESA compliant VGA Source
• DDC compliant EDID emulation on the Sender
• Supports all baud rates to 115 Kbps
• Perfect for Kiosk, or Projector Control applications
• RS-232 and high quality VGA input cables provided
• Compact metal enclosure with mounting provisions
• Compact, Rugged, Reliable, and Economical
• Made in USA

Specifications

• Standards:
  Analog VGA Video (RGBHV), YPbPr, or RGB signals with sync-on-green.
• Resolutions:
  All up to WUXGA (1920x1200 / 60Hz), 1080p
• Video Level:
  0.7 v p-p on RGB, 5v p-p H/V sync
• Bandwidth:
  20 Hz to 450 MHz
• Common Mode Noise Rejection:
  100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
• Max Distance:
  Up to 500 ft. (152 meters) based on resolution
• Temperature:
  Operating: 32 to 122 Deg F (0 to 50 Deg C);
  Storage: -40 to +185 Deg F (-40 to +85 Deg C)
• Enclosure:
  Aluminum
• MTBF:
  100,000 hours (calculated estimate)
• Power:
  Via the included power adapter. Voltage: 6v DC Center-Positive. Average Power Consumption: 200mA (Sender) 160mA (Receiver)
• Size (H x W x D):
  1.25” H x 2.75” W x 3.08” D* Each Device
  *Units have 2 mounting ears that protrude 0.40” beyond the main box on each side.
• RS232 Connections:
  Pin 2 = RX
  Pin 3 = TX
  Pin 5 = GND 

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.