Pelco PP451 Rooftop Parapet Mount for Medium Pendant Domes, Gray

Pelco PP451 Rooftop Parapet Mount for Medium Pendant Domes, Gray

The Pelco PP451 is a gray aluminum rooftop parapet mount that holds an outdoor pendant dome on 1.5-inch NPT pipe from a rooftop or other smooth horizontal surface. The arm swivels 360 degrees within available clearance for easy installation and service, indexing bolts lock it in position, and a removable end cap gives access to the wiring. It is rated for about 45 lb. Compared with the PP350/PP351 it stands 9.72 inches taller with 14.77 inches more overhang, for medium-size domes or where extra clearance is needed.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Attach the mounting base to the rooftop or horizontal surface with at least two 3/8-16 fasteners on each of its four sides (eight minimum, not supplied). Pull wiring up through the arm, thread on the dome, swing the arm into position and tighten the brake plate and indexing bolts. Seal around bolt holes where water could enter.

Compatible Cameras

• Pelco DF8 Series pendant domes
• Other medium-size 1.5-inch NPT pendant domes

Fits outdoor medium-size pendant domes that use 1.5-inch NPT pipe.

Related Products

• Pelco PP451-SW Rooftop Parapet Mount, White
• Pelco PP450 Parapet Wall Mount, Gray
• Pelco PP351 Rooftop Parapet Mount, Gray
• Pelco IWM-GY Wall Mount, Gray

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco PP451

What does the Pelco PP451 mount to?

It mounts to a rooftop or other smooth horizontal surface.

Which cameras fit the PP451?

It is designed for outdoor medium-size pendant domes that use 1.5-inch NPT pipe, such as Pelco DF8 Series domes.

What is the load rating?

Approximately 45 lb (20.41 kg).

Is mounting hardware included?

No. Use 3/8-16 type fasteners suited to the surface, a minimum of eight, plus sealant around the bolt holes if needed.

Can I service the dome after installation?

Yes. The arm swivels within available clearance so the dome can be pulled back for maintenance, and the removable end cap provides access to the wiring.

How is it different from the PP351?

The PP451 is 9.72 inches taller with 14.77 inches more overhang, for medium-size pendant domes or installs where the smaller model's clearance is not enough.