Pelco POE130-ATUS 30 W Single-Port Gigabit PoE+ Midspan, US Cord
Description
Pelco POE130-ATUS 30 W Single-Port Gigabit PoE+ Midspan, US Cord
The Pelco POE130-ATUS is a single-port Gigabit PoE+ midspan that adds up to 30 W of IEEE 802.3at power to one Ethernet link. It is built for IP cameras with high-quality streaming video, passes 10/100/1000Base-T data, and is backward compatible with 802.3af devices. Input is 90-264 VAC and a US power cord is included. Pair it with the POE130-XT extender to reach cameras beyond 100 m.
Key Specifications
| Part number | POE130-ATUS |
| Type | Single-port PoE+ midspan injector |
| Standard | IEEE 802.3at, backward compatible with 802.3af |
| Output | 30 W at 55 VDC (pins 4/5 +, 7/8 -) |
| Data rate | 10/100/1000Base-T |
| Input | 90-264 VAC, 50-60 Hz, 1 A RMS; US power cord included |
| Protection | Short-circuit and overload |
| Operating temperature | -10 to 40 C (14 to 104 F) |
| Weight | 170 g (0.37 lb) |
| Compliance | NDAA compliant |
Full specifications are listed in the Detailed Specifications tab.
Connection
Connect the switch port to the Data In jack and the camera to the PoE output jack with Category 5/5e or better cable, up to 100 m. The yellow LED shows AC power and the green LED shows channel power.
Compatible Products
The POE130-XT extender lists the POE130-ATUS as a compatible 802.3at power source.
Related Products
- Pelco POE130-XT Gigabit PoE Extender
- Avigilon/Alta PD-9001GR/AT/AC-NA-MSI PoE+ Single Port Injector 30W
- Pelco PD-9501GR/AC-NA-MSI 60 W PoE Injector
- Pelco SURGEPR Lightning Surge Protector for Ethernet/PoE Lines
- Pelco POE2436-ATUS 24-Port PoE+ Midspan
Explore More
- Shop PoE Devices at Affinitech Store
- Shop Power Supplies at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco POE130-ATUS
How much power does the POE130-ATUS deliver?
30 W guaranteed on one port at a nominal 55 VDC, per IEEE 802.3at.
Does it work with 802.3af cameras?
Yes. It is backward compatible with IEEE 802.3af devices.
What data rates does it support?
10/100/1000Base-T pass-through.
Is a power cord included?
Yes. The -ATUS version includes a US power cord. The -ATEU version has a European cord.
Can I extend the cable run?
Yes. Add the POE130-XT PoE extender to extend Ethernet and PoE by another 100 m.
What is the operating temperature?
-10 to 40 C (14 to 104 F), for indoor use.
Detailed Specifications
Pelco POE130-ATUS Specifications
| Specification | Details |
|---|---|
| General | |
| Model | POE130-ATUS |
| Description | Single-port PoE+ 30 W midspan, AC input, US power cord |
| Variants | POE130-ATUS (US cord), POE130-ATEU (European cord) |
| Connectors | |
| AC input | 3-pin (C5) |
| Data in/out | Shielded RJ-45, EIA 568A and 568B |
| Output pins | 4/5 positive, 7/8 negative |
| Electrical | |
| Standard | IEEE 802.3at, backward compatible with 802.3af |
| Output voltage | 55 VDC |
| Output power | 30 W |
| Protection | Short-circuit and overload |
| Input voltage | 90-264 VAC |
| Input current | 1 A (RMS) at 100-240 VAC |
| Input frequency | 50-60 Hz |
| Isolation | 1,500 VAC for 1 minute, 10 mA |
| Network | |
| Data rates | 10/100/1000Base-T |
| Cabling | Category 5/5e or higher, max 100 m |
| Indicators | |
| Yellow LED | AC power |
| Green LED | Channel power |
| Physical | |
| Dimensions (W x H x L) | 46 x 32 x 141 mm |
| Weight | 170 g |
| Environmental | |
| Operating temperature | -10 to 40 C (14 to 104 F) |
| Storage temperature | -20 to 70 C (-4 to 158 F) |
| Humidity | 90 percent max, non-condensing |
| Certifications | |
| Approvals | CE, EN 55022 Class B, FCC Part 15 Class B, UL/cUL Listed |
| NDAA | NDAA compliant |
| Shipping | |
| Shipping dimensions | 8.2 x 4.7 x 2.2 in |
| Shipping weight | 0.95 lb |