Pelco POE130-XT Single-Port Gigabit PoE Extender, 100 m
Description
Pelco POE130-XT Single-Port Gigabit PoE Extender, 100 m
The Pelco POE130-XT is a single-port Gigabit PoE extender that adds another 100 m to an Ethernet and PoE run without local power. Powered by an IEEE 802.3at source, it repeats data and passes power to an IP camera, so a single extender reaches 200 m and cascaded extenders reach up to 400 m (1,640 ft) from the network closet. It outputs 802.3af power from a standard 802.3at source and up to 33 W from a 60 W 4-pair source, with a boost circuit to compensate for wire drop. Plug-and-play, no configuration needed.
Key Specifications
| Part number | POE130-XT |
| Type | Single-port Gigabit PoE extender (repeater) |
| Reach | Adds 100 m per extender; up to 400 m (1,640 ft) cascaded |
| Input | IEEE 802.3at PoE, 46-57 VDC |
| Output power | 15 W with 802.3at input; 33 W with 60 W 4-pair input |
| Output voltage | 44-55 VDC, 802.3af detection |
| Data rate | 10/100/1000 Mbps |
| Connectors | RJ-45 in and out, alternatives A and B |
| Operating temperature | 0 to 40 C at Gigabit; 0 to 50 C at 10/100 |
| Compliance | NDAA compliant |
Full specifications are listed in the Detailed Specifications tab.
Installation
Place the extender at the end of the first 100 m run and connect the camera to its output. No local power or configuration is required. Cascade additional extenders to reach up to 400 m from the PoE source.
Compatible Products
Pelco lists the POE130-AT 802.3at midspans and the PD9601G 60 W high-power midspan as power sources for the extender.
Related Products
- Pelco POE130-ATUS 30 W PoE+ Midspan
- Pelco PD-9501GR/AC-NA-MSI 60 W PoE Injector
- Pelco SURGEPR Lightning Surge Protector for Ethernet/PoE Lines
- Pelco SM8TAT2SA-NA Managed PoE+ Switch
Explore More
- Shop PoE Devices at Affinitech Store
- Shop Power Supplies at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco POE130-XT
How far does the POE130-XT extend a link?
Each extender adds 100 m. One extender reaches 200 m total, and cascaded extenders reach up to 400 m (1,640 ft).
Does it need local power?
No. It is powered by the PoE source on its input port.
How much power reaches the camera?
802.3af power levels (15 W) from a standard 802.3at source, or up to 33 W when fed from a 60 W 4-pair 802.3at source.
Does it support Gigabit?
Yes. It supports 10/100/1000 Mbps data rates.
Does it need configuration?
No. It is plug-and-play.
What is the operating temperature?
0 to 40 C (32 to 104 F) at Gigabit rates and 0 to 50 C (32 to 122 F) at 10/100 Mbps.
Detailed Specifications
Pelco POE130-XT Specifications
| Specification | Details |
|---|---|
| General | |
| Model | POE130-XT |
| Description | Single-port PoE Gigabit extender powered by IEEE 802.3at source |
| Input (802.3at) | |
| Input source | IEEE 802.3at source |
| Input detection | 25K, IEEE 802.3at |
| DC input voltage | 46-57 VDC |
| Total output power | 15 W |
| DC output voltage | 44-55 VDC |
| Output detection | 25K, IEEE 802.3af |
| Input (802.3at 4-pair, 60 W) | |
| Input source | IEEE 802.3at 4-pair (60 W) source |
| DC input voltage | 46-57 VDC |
| DC input current | 0.7 A max load |
| Total output power | 33 W |
| DC output voltage | 44-55 VDC |
| Connection | |
| Connectors | RJ-45 input and output |
| Input/output connection | Supports alternatives A and B |
| Data rates | 10/100/1000 Mbps |
| Indicators | |
| Power LEDs | Green on = PoE input/output enabled |
| Network LED | Orange on = link; blinking = data |
| Environmental | |
| Operating temperature | 0 to 50 C (32 to 122 F) at 10/100 Mb; 0 to 40 C (32 to 104 F) at Gigabit |
| Storage temperature | -20 to +70 C (-4 to 158 F) |
| Humidity | 5 to 90 percent |
| Certifications | |
| Approvals | RoHS, WEEE, CE, FCC Part 15 Class B, EN 55032 Class B, EN 55024, VCCI |
| NDAA | NDAA compliant |
| Shipping | |
| Shipping dimensions | 5.0 x 2.5 x 1.5 in |
| Shipping weight | 1.0 lb |
Related Products
Related Products
Pelco POE130-ATUS 30 W Single-Port Gigabit PoE+ Midspan, US Cord
Brand: Pelco
Pelco PD-9501GR/AC-NA-MSI 60 W Single-Port Gigabit PoE Injector
Brand: Pelco
Pelco POE2436-ATUS 24-Port Gigabit PoE+ Midspan, 36 W per Port
Brand: Pelco
Pelco POE90U1BT 90W High PoE Single-Port Injector
Brand: Pelco
Pelco SM8TAT2SA-NA 10-Port Gigabit Managed PoE+ Switch, 130 W
Brand: Pelco