Pelco OHEP90INJO1 Outdoor 90 W PoE Injector, IP66/NEMA 4X

Pelco OHEP90INJO1 Outdoor 90 W PoE Injector, IP66/NEMA 4X

The Pelco OHEP90INJO1 is a single-channel 90 W Power over Ethernet injector built for outdoor installation. It runs from 100-240 VAC mains and is housed in a weatherproof enclosure rated IP66 and NEMA 4X, so high-power PoE cameras and housings can be fed close to the device instead of from the network closet. For indoor rack or desk use, see the POE90U1BT 90 W injector.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Use

Install the injector outdoors near the powered device, connect 100-240 VAC mains, and run the data and power Ethernet cable to the camera or housing. Add an Ethernet surge protector on exposed outdoor runs.

Related Products

• Pelco POE90U1BT 90W High PoE Single-Port Injector
• Pelco SURGEPR Lightning Surge Protector for Ethernet/PoE Lines
• Pelco PD-9501GR/AC-NA-MSI 60 W PoE Injector
• Pelco POE130-ATUS 30 W PoE+ Midspan
• Avigilon POE60U-1BTE 60 W Gigabit 802.3bt PoE Injector

Explore More

• Shop PoE Devices at Affinitech Store
• Shop Power Supplies at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco OHEP90INJO1

What is the OHEP90INJO1?

A single-channel 90 W PoE injector designed for outdoor installation.

What input power does it need?

100 to 240 VAC.

Can it be installed outside?

Yes. It is rated IP66 and NEMA 4X and operates from -40 to +65 C (-40 to 149 F).

How many devices can it power?

One. It has a single PoE channel with up to 90 W output.

Is there an indoor 90 W option?

Yes. The POE90U1BT is Pelco's indoor single-port 90 W injector.