Pelco EH14 Compact Outdoor Camera Enclosure, IP66, No Heater

Pelco EH14 Compact Outdoor Camera Enclosure, IP66, No Heater

The Pelco EH14 is a compact, general-purpose EH14 Series camera enclosure that protects analog and IP megapixel box cameras indoors or outdoors. The injection-molded, tight-fitting housing is IP66 and NEMA Type 4 rated against dust and moisture, built from UV-protected, flame-retardant polycarbonate, and fits a camera and lens up to 11 in long. This base model has no heater, blower or power supply; choose the EH14-2 when you need a 24 VAC heater/blower. Mount it with an EM2400 wall mount, or add the PA101 pole adapter for poles.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

The lid closes with two captive Torx T25 screws and the face plate is held by four Phillips screws. Run power and video cables through the two adjustable 1/2-in NPT liquid-tight glands. Pelco recommends the EM2400 medium-duty feedthrough wall mount (40 lb max load) or the EM1109 pole mount; the EM2400 also fits poles from 3 to 8 in diameter with the PA101 pole adapter.

Related Products

• Pelco EH14-2 Enclosure with Heater/Blower, 24 VAC
• Pelco EH20 Die-Cast Aluminum Camera Enclosure
• Pelco PA101 Pole Mount Adapter
• Pelco WCS1-4 Outdoor 24 VAC Power Supply

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco EH14

What cameras fit the EH14?

The EH14 accepts analog and IP megapixel box cameras with a camera and lens package up to 11.00 x 3.25 x 4.00 in (L x W x H), including wiring, with the lens fully extended.

Does the EH14 have a heater or blower?

No. The EH14 is the base model without a heater, blower or power supply. The EH14-2 adds a 24 VAC heater and blower and supplies 24 VAC to the camera.

Can the EH14 be used outdoors?

Yes. It is rated IP66 and NEMA Type 4 for indoor and outdoor use, with an operating range of -40 to 60 C (-40 to 140 F).

What is the EH14 made of?

Injection-molded polycarbonate that is UV protected and flame-retardant, in gray.

What mount do I need?

Pelco recommends the EM2400 medium-duty feedthrough wall mount (40 lb max load) or the EM1109 pole mount. The EM2400 can also go on 3 to 8 in poles with the PA101 pole adapter. Mounts are sold separately.