Pelco EH20-P-H Camera Enclosure, PoE+/HPoE Heater/Blower and Mount
Description
Pelco EH20-P-H Camera Enclosure, PoE+/HPoE Heater/Blower and Mount
The Pelco EH20-P-H is an EH20 Series die-cast aluminum camera enclosure with a PoE+/HPoE powered heater and blower, supplied with a sun shroud and EM20 wall mount with cable management. It is powered over Ethernet: on HPoE the heater and blower run and PoE is passed to the camera (13 W max); on PoE+ (802.3at) the heaters are disabled. Operating range is -30 to 50 C (-22 to 122 F), or -10 to 50 C (14 to 122 F) on PoE+. It meets IP66 and Type 4X, is IK10 impact rated (enclosure), and its side-hinged lid gives easy access to the camera sled for box cameras with fixed or varifocal lenses up to 9 in long.
Key Specifications
| Part number | EH20-P-H |
| Type | Die-cast aluminum camera enclosure with heater/blower |
| Input power | PoE+ (IEEE 802.3at) or HPoE |
| Camera power output | PoE, 13 W max |
| Heater operation | Enabled on HPoE; disabled on PoE+ |
| Included | Sun shroud and EM20 wall mount |
| Camera and lens size | Up to 9.00 x 4.00 x 3.50 in |
| Protection | IP66, Type 4X, IK10 (enclosure) |
| Dimensions with shroud and mount | 6.73 x 9.43 x 18.56 in (W x H x L) |
| Unit weight | 6.90 (3.13 kg) lb |
Full specifications are listed in the Detailed Specifications tab.
Installation and power
Mount the enclosure on the included EM20 wall mount, which has cable management; the EP21 small pole mount adapts the EM20 to poles, and the EP20 and EC20 are optional pole and ceiling mounts. Bring cables in through the two PG11 compression glands on the bottom. It is powered over Ethernet and passes PoE through to the camera (13 W max). On HPoE the heaters are enabled; on PoE+ (IEEE 802.3at) the heaters are disabled and the operating range is -10 to 50 C (14 to 122 F). Pelco designates its PD9601G/AC-US single-port HPoE midspan for use when the heaters are needed and notes other injectors may not work.
Compatible Cameras
- Pelco Sarix Enhanced 4P SRXE4P-2-IBX-1-B 2MP Indoor Box Camera
- Pelco Sarix Enhanced 4P SRXE4P-4-IBX-1-B 4MP Indoor Box Camera
- Pelco Sarix Enhanced 4P SRXE4P-8-IBX-1-B 8MP Indoor Box Camera
Pelco recommends Sarix, Sarix Professional and Sarix Enhanced series box cameras for the EH20 Series.
Related Products
- Pelco EH20 Camera Enclosure, No Heater/Blower
- Pelco EH20-2-H Enclosure, 24 VAC Heater/Blower
- Pelco EH20-3-H Enclosure, 110-230 VAC Heater/Blower
- Pelco EH14 Compact Camera Enclosure
- Pelco WCS1-4 Outdoor 24 VAC Power Supply
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco EH20-P-H
What power does the EH20-P-H need?
It is powered over Ethernet and passes PoE through to the camera (13 W max). On HPoE the heaters are enabled; on PoE+ (IEEE 802.3at) the heaters are disabled and the operating range is -10 to 50 C (14 to 122 F). Pelco designates its PD9601G/AC-US single-port HPoE midspan for use when the heaters are needed and notes other injectors may not work.
What is included?
The enclosure with heater and blower, an adjustable sun shroud and the EM20 wall mount with cable management.
What cameras fit inside?
Analog and IP box cameras with fixed or varifocal lenses up to 9.00 x 4.00 x 3.50 in (L x W x H) including the BNC connector. Pelco recommends Sarix, Sarix Professional and Sarix Enhanced series cameras.
What are the environmental ratings?
IP66 and Type 4X, IK10 impact rated (enclosure only, not the window). -30 to 50 C (-22 to 122 F); -10 to 50 C (14 to 122 F) when powered by PoE+
What is it made of?
Die-cast aluminum (ADC10) with an alodine treatment and gray polyester powder coat, RAL 7047.
Detailed Specifications
Pelco EH20-P-H Specifications
| Specification | Details |
|---|---|
| General | |
| Model | EH20-P-H |
| Description | Camera enclosure with heater/blower, sun shroud and EM20 wall mount |
| Construction | Die-cast aluminum (ADC10) |
| Finish | Alodine with gray polyester powder coat, RAL 7047 |
| Lid | Side-hinged, Torx security screws |
| Mechanical | |
| Camera mounting | Single adjustable slot on camera sled |
| Camera and lens size | Up to 9.00 x 4.00 x 3.50 in (22.86 x 10.16 x 7.62 cm) L x W x H, including BNC connector |
| Viewing window | High optical-grade soda lime glass, 0.118 in (0.3 cm) thick |
| Viewing area | 3.5 x 3.0 in (8.89 x 7.62 cm) W x H |
| Cable entry | Two PG11 compression glands on bottom, cable diameter up to 0.395 in (1.00 cm) |
| Cable entry holes | 0.74 in (1.87 cm), for PG11 or 3/8-in NPT; can be enlarged to 0.88 in (2.22 cm) for PG13.5 or 1/2-in NPT |
| Mounting holes | 1/4-20 UNC |
| Electrical | |
| Input | PoE+ (IEEE 802.3at) or HPoE |
| Heaters | Enabled on HPoE; disabled on PoE+ |
| Camera power output | PoE, 13 W max |
| Recommended midspan | PD9601G/AC-US single-port HPoE midspan (other injectors may not work with heaters) |
| Environmental | |
| Operating temperature | -30 to 50 C (-22 to 122 F); -10 to 50 C (14 to 122 F) when powered by PoE+ |
| Certifications | |
| Certifications | CE (Class A), ICES-003 (Class A), UL/cUL listed, UL/IEC 60950-22, KCC, RCM |
| Ratings | IP66, Type 4X, IK10 (enclosure only, not the front window) |
| Dimensions and Weight | |
| Base unit (W x H x L) | 6.73 x 4.29 x 15.97 in (17.09 x 10.90 x 40.57 cm) |
| With sun shroud and wall mount (W x H x L) | 6.73 x 9.43 x 18.56 in (17.09 x 23.96 x 47.14 cm) |
| Unit weight | 6.90 (3.13 kg) lb |
| Shipping weight | 7.82 lb (3.55 kg) |
| EM20 wall mount weight | 0.90 lb (0.41 kg) |
| Recommended Cameras | |
| Pelco cameras | Sarix, Sarix Professional and Sarix Enhanced series |
| Optional Mounts and Accessories | |
| EM20 | Wall mount with cable management |
| EP20 | Large pole mount |
| EC20 | Ceiling mount |
| EP21 | Small pole mount, for use with EM20 |
| EM20JB | Wall mount junction box for EM20 |
Related Products
Related Products
Pelco EH20-2-H Camera Enclosure, 24 VAC Heater/Blower and Mount
Brand: Pelco
Pelco EH20-3-H Camera Enclosure, 110-230 VAC Heater/Blower, Mount
Brand: Pelco
Pelco EH20 Die-Cast Aluminum Camera Enclosure, IP66, No Heater
Brand: Pelco
Pelco EH14-2 Compact Camera Enclosure with Heater/Blower, 24 VAC
Brand: Pelco
Sony Outdoor unitized SNC-EP580 Camera with heater and blower, HPoE++, pendant mount with tinted lower dome, UNI-ONEP580T7
Brand: Sony