Pelco WCS1-4 Outdoor 24 VAC Power Supply, 1 Fused Output, 100 VA

Pelco WCS1-4 Outdoor 24 VAC Power Supply, 1 Fused Output, 100 VA

The Pelco WCS1-4 is an outdoor power supply that delivers 24, 26 or 28 VAC to one camera or PTZ positioning system. Its single fused output handles up to 4 A (100 VA) total, enough for a pan/tilt with heater and blower as well as the camera, and the higher output taps compensate for voltage drop on long wire runs. Input is selectable at 100, 120 or 240 VAC, and the gray powder-coated aluminum enclosure is rated NEMA Type 4X and IP66.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Wiring

Cable enters through hole plugs for 0.75 in (1.9 cm) conduit. Input terminals accept 12-16 AWG solid wire and the output accepts 16-20 AWG solid or stranded wire on screw-type barrier strips. The fuse value can be changed to suit the connected equipment, and the stainless steel link-lock latch accepts a padlock (not included).

Compatible Cameras

• Pelco Spectra outdoor PTZ domes (24 VAC)
• Pelco Esprit positioning systems (24 VAC)

Pelco rates the WCS series for Spectra and Esprit integrated systems, including pan/tilt, heater and blower load.

Related Products

• Pelco IWM24-GY Wall Mount with 24 VAC Transformer for Spectra, Gray
• Pelco COMB200A Communication Box, 24 VAC
• Pelco SURGEPR Lightning Surge Protector for Ethernet/PoE Lines

Explore More

• Shop Power Supplies at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco WCS1-4

What does the WCS1-4 power?

One outdoor 24 VAC unit, such as a Spectra or Esprit system including its pan/tilt, heater and blower, up to 4 A (100 VA) total.

What output voltages are available?

24, 26 or 28 VAC. The higher taps compensate for voltage loss on long wire runs.

What input voltage does it accept?

Selectable 100, 120 or 240 VAC at 50/60 Hz, with 1 A required input current.

Can it be mounted outdoors?

Yes. The aluminum enclosure is rated NEMA Type 4X and IP66 and operates from -45 to 50 C (-50 to 122 F).

Is the output protected?

Yes. The single output is fused at 4 A, and the fuse can be changed to match the connected equipment.

Is a padlock included?

No. The enclosure has a stainless steel link-lock latch, and the padlock is not included.