Pelco HGV52K2A200 HGV Extra-Large Camera Housing with Wiper, 24 VAC
Description
Pelco HGV52K2A200 HGV Extra-Large Camera Housing with Wiper, 24 VAC
The Pelco HGV52K2A200 is an HGV extra-large camera housing for 24 VAC sites, built to hold the largest motorized zoom lenses for long-range surveillance. It comes equipped with a 24 VAC integrated wiper, a reinforced triple heater with two continuous-duty fans, and a sunshield, and is IP66 rated from -20 to 60 C (-4 to 140 F). The aluminum base and ABS top suit border, coastal, harbor and airport monitoring, and the top lifts off on a safety cord for easy camera setup. Mount it with the WBLA bracket.
Key Specifications
| Part number | HGV52K2A200 |
| Type | HGV extra-large camera housing |
| Input power | 24 VAC, 50/60 Hz |
| Included | Sunshield, triple fan-assisted heater, 24 VAC wiper |
| Current | 3.35 A max (heater/fans); wiper 0.3 A max |
| Material | Aluminum base, ABS upper body and sunshield |
| Protection | IP66 |
| Operating temperature | -20 to 60 C (-4 to 140 F) |
| Unit weight | 20.3 lb (9.2 kg) |
Full specifications are listed in the Detailed Specifications tab.
Installation and options
Lift off the upper body, which stays attached by a safety cord, to install and adjust the camera and lens. Cables enter through four M16 glands on the stainless steel plate. Pelco lists the WBLA wall bracket with ball joint for the HGV. Add a WAS or WASPT washer pump to clean the window, and the DTWRX board for RS-485 wiper and washer control on WASPT pumps.
Related Products
- Pelco WBLA Wall Bracket with Ball Joint
- Pelco DTWRX Wiper/Washer Control Board
- Pelco WASPT0V23L5M00 Washer System
- Pelco OUPTSPAHXL Wiper Blade for Ulisse Maxi and HGV
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco HGV52K2A200
What power does the HGV52K2A200 need?
It runs on 24 VAC, 50/60 Hz: the triple heater and fans draw 3.35 A max and the integrated wiper 0.3 A max.
What is included?
The housing with sunshield, a reinforced triple heater with two continuous-duty fans, and a 24 VAC integrated wiper.
Does it include a camera power supply?
No. Per Pelco, the 100-240 VAC to 12 VDC camera power supply comes installed only in the 230 VAC version, the HGV52K1A100.
What is it for?
Long-range outdoor surveillance with the largest motorized zoom lenses, such as border, coastline, harbor, airport and environmental monitoring.
How is it mounted?
Pelco lists the WBLA solid aluminum wall bracket with ball joint for the HGV, sold separately.
Detailed Specifications
Pelco HGV52K2A200 Specifications
| Specification | Details |
|---|---|
| General | |
| Model | HGV52K2A200 |
| Construction | Aluminum base; ABS upper body and sunshield |
| Finish | Epoxy-polyester powder paint, RAL 9002 (base) |
| Screws | Stainless steel external screws |
| Included | Sunshield, triple fan-assisted heater (two continuous-duty fans), wiper |
| Mechanical | |
| Cable glands | 4 x M16 on stainless steel plate (no custom holes) |
| Window | Extra clear glass |
| Top body | Removable, held by safety cord |
| Unit weight | 9.2 kg (20.3 lb) |
| Electrical | |
| Supply voltage | 24 VAC, 50/60 Hz |
| Heater and fans | 24 VAC, 3.35 A max, 50/60 Hz (on at 15 C, off at 22 C +/-3 C) |
| Integrated wiper | 24 VAC, 0.3 A max |
| Environmental | |
| Installation | Indoor and outdoor |
| Operating temperature | -20 to 60 C (-4 to 140 F) with heating |
| Relative humidity | 5 to 95% |
| Certifications | |
| Electrical safety (CE) | EN60950-1, EN62368-1 |
| EMC (CE) | EN50130-4, EN61000-6-3 |
| IP rating | IP66 (EN60529) |
| Optional Accessories | |
| Washers | WAS and WASPT series washer pumps |
| Washer control | DTWRX RS-485 receiver for WASPT |
| Bracket | WBLA wall bracket with ball joint |
| Shipping | |
| Shipping dimensions | 32 x 11 x 10 in |
| Shipping weight | 24.6 lb |