Pelco WASPT0V23L5M00 Washer Pump, 23L Tank, 16 ft Head, 230/120/24V
Description
Pelco WASPT0V23L5M00 Washer Pump, 23L Tank, 16 ft Head, 230/120/24V
The Pelco WASPT0V23L5M00 is a WASPT washer kit that pairs a 23 L (6 gal) polyethylene water tank in a stainless steel cage with an integrated pump delivering washing liquid up to 5 m (16 ft). It supplies the window washer of PTZ cameras and camera housings equipped with a wiper, including third-party products, and runs on 230, 120 or 24 VAC. As a WASPT model it adds low-liquid alarm outputs and can be controlled remotely over RS-485 with the optional DTWRX board.
Key Specifications
| Part number | WASPT0V23L5M00 |
| Type | WASPT washer pump with water tank |
| Tank capacity | 23 L (6 gal) |
| Max delivery head | 5 m (16 ft) (tube length 5 m (16 ft)) |
| Power | 230 VAC 0.3 A, 120 VAC 0.6 A, 24 VAC 1.8 A, 50/60 Hz |
| Low-liquid float switch | No |
| Alarm outputs | 1 auto-powered, 1 dry contact |
| Construction | Polyethylene tank, stainless steel cage |
| Protection rating | IP66 (EN60529) |
| Dimensions (W x H x L) | 301 x 430 x 348 mm (11.9 x 16.9 x 13.7 in) |
| Weight | 5.5 kg (12.1 lb) |
Full specifications are listed in the Detailed Specifications tab.
Installation
Mount the tank within the rated delivery head of the camera, run the supplied tube to the washer nozzle of the PTZ or housing, and wire the pump to the camera washer output or a communication box. Cable entries are 1 x M20 and 3 x M16 glands. Add antifreeze to the water where temperatures fall below freezing. For remote wiper and pump control over RS-485, fit the optional DTWRX receiver.
Related Products
- Pelco WASPT0V23L11M00 23 L Washer, 36 ft Delivery, 230/120/24 VAC
- Pelco WASPT3V23L30M00 23 L Washer, 98 ft Delivery, 120 VAC
- Pelco WASCAB Stainless Steel Cabinet for WAS/WASPT
- Pelco DTWRX RS-485 Wiper and Washer Control Receiver
- Pelco COMB100A Communication Box, 220-230 VAC
- Pelco COMB200A Communication Box, 24 VAC
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco WASPT0V23L5M00
What does the Pelco WASPT0V23L5M00 do?
It stores washing liquid in a 23 L (6 gal) tank and pumps it up to 5 m (16 ft) to the window washer of a PTZ camera or camera housing equipped with a wiper.
What power does it need?
It runs on 230 VAC 0.3 A, 120 VAC 0.6 A, 24 VAC 1.8 A at 50/60 Hz.
Does it warn when the tank is empty?
No. This version has no float level switch; check the liquid level during routine maintenance.
Can it be used outdoors and in freezing weather?
It is rated IP66 and operates up to 60 C (140 F). With antifreeze liquid it works down to -10 C (14 F), or -25 C (-13 F) with reduced performance and delivery height.
Does it work with non-Pelco cameras?
Yes. Pelco states the WAS and WASPT washers can also be used with third-party PTZ cameras and housings that have a wiper.
What is the difference between WAS and WASPT?
WASPT models add low-liquid alarm outputs and support remote control of the wiper and pump over RS-485 with the optional DTWRX board.
Detailed Specifications
Pelco WASPT0V23L5M00 Specifications
| Specification | Details |
|---|---|
| General | |
| Model | WASPT0V23L5M00 |
| Series | WASPT |
| Description | Water tank 23 L (6 gal), pump with delivery up to 5 m (16 ft), IN 230/120/24Vac |
| Ordering code | WASPT / 0V (230/120/24 VAC) / 23L (23 L (6 gal)) / 5M (5 m (16 ft)) / 00 |
| Mechanical | |
| Tank | Polyethylene, stainless steel cage |
| Water tank capacity | 23 L (6 gal) |
| Delivery | 5 m (16 ft) max |
| Tube length | 5 m (16 ft) |
| Float level switch | No |
| Cable glands | 1 x M20 + 3 x M16 |
| Dimensions (W x H x L) | 301 x 430 x 348 mm (11.9 x 16.9 x 13.7 in) |
| Unit weight | 5.5 kg (12.1 lb) |
| Electrical | |
| Supply voltage / current | 230 VAC 0.3 A, 120 VAC 0.6 A, 24 VAC 1.8 A, 50/60 Hz |
| Remote control | RS-485 wiper and pump control with optional DTWRX board |
| Environmental | |
| Maximum temperature | 60 C (140 F) |
| Minimum temperature with antifreeze | -10 C (14 F) |
| Minimum with antifreeze (reduced performance and delivery) | -25 C (-13 F) |
| Protection rating (EN60529) | IP66 |
| Certifications | |
| Certifications | CE (EN60950-1, EN62368-1, EN50130-4, EN61000-6-3, EN55032 Class B, EN60950-22), FCC Part 15 Class B |
| Compatibility | |
| Use with | PTZ cameras and camera housings equipped with a wiper, including third-party products |
| Accessories | |
| COMB100A | Communication box, IN 220-230 VAC, OUT 24 VAC |
| COMB200A | Communication box, IN 24 VAC, OUT 24 VAC |
| COMB300A | Communication box, IN 120-127 VAC, OUT 24 VAC |
| DTWRX | Data receiver for remote control of the wiper and WASPT pumps |
| WASCAB | Stainless steel cabinet (5 m and 11 m versions only) |
| Shipping | |
| Package weight | 6.4 kg (14 lb) |
| Package dimensions (W x H x L) | 32 x 37.5 x 51 cm (12.5 x 14.7 x 20 in) |
Related Products
Related Products
Pelco WAS0V23L5M00 Washer Pump, 23L Tank, 16 ft Head, 230/120/24V
Brand: Pelco
Pelco WASPT0V23L11M00 Washer Pump, 23L Tank, 36 ft Head, 230/120/24V
Brand: Pelco
Pelco WAS0V23L11M00 Washer Pump, 23L Tank, 36 ft Head, 230/120/24V
Brand: Pelco
Pelco WAS0V5L5M00 Washer Pump, 5L Tank, 16 ft Head, 230/120/24V
Brand: Pelco
Pelco WASPT3V23L30M00 Washer Pump, 23L Tank, 98 ft Head, 120V
Brand: Pelco