Pelco WASPT3V23L30M00 Washer Pump, 23L Tank, 98 ft Head, 120V

Pelco WASPT3V23L30M00 Washer Pump, 23L Tank, 98 ft Head, 120V

The Pelco WASPT3V23L30M00 is a WASPT washer kit that pairs a 23 L (6 gal) polyethylene water tank in a stainless steel cage with an integrated pump delivering washing liquid up to 30 m (98 ft). It supplies the window washer of PTZ cameras and camera housings equipped with a wiper, including third-party products, and runs on 120 VAC. A float level switch detects when the tank runs dry and stops the pump automatically. As a WASPT model it adds low-liquid alarm outputs and can be controlled remotely over RS-485 with the optional DTWRX board.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Mount the tank within the rated delivery head of the camera, run the supplied tube to the washer nozzle of the PTZ or housing, and wire the pump to the camera washer output or a communication box. Cable entries are 1 x M20 and 3 x M16 glands. Add antifreeze to the water where temperatures fall below freezing. For remote wiper and pump control over RS-485, fit the optional DTWRX receiver.

Compatible Cameras

• Pelco Esprit Compact ESCE1-2X40-RLU 2MP 40x PTZ
• Pelco Esprit Compact ESCE1-4X36-RLU 4MP 36x PTZ
• Pelco Esprit Compact ESCE1-8X36-RLU 8MP 36x PTZ
• Pelco Esprit Anti-Corrosion ESSE1-2X40-SBT-PAW 2MP 40x Fixed

and other Esprit Compact and Esprit Anti-Corrosion cameras equipped with a wiper

Related Products

• Pelco WASPT0V23L11M00 23 L Washer, 36 ft Delivery, 230/120/24 VAC
• Pelco DTWRX RS-485 Wiper and Washer Control Receiver
• Pelco COMB100A Communication Box, 220-230 VAC
• Pelco COMB200A Communication Box, 24 VAC
• Pelco COMB300A Communication Box, 120-127 VAC

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco WASPT3V23L30M00

What does the Pelco WASPT3V23L30M00 do?

It stores washing liquid in a 23 L (6 gal) tank and pumps it up to 30 m (98 ft) to the window washer of a PTZ camera or camera housing equipped with a wiper.

What power does it need?

It runs on 120 VAC 4.5 A at 60 Hz.

Does it warn when the tank is empty?

Yes. A float level switch detects the lack of liquid and stops the pump automatically, and the WASPT alarm outputs (one auto-powered, one dry contact) can signal it.

Can it be used outdoors and in freezing weather?

It is rated IPX4 and operates up to 60 C (140 F). With antifreeze liquid it works down to -10 C (14 F).

Does it work with non-Pelco cameras?

Yes. Pelco states the WAS and WASPT washers can also be used with third-party PTZ cameras and housings that have a wiper.

What is the difference between WAS and WASPT?

WASPT models add low-liquid alarm outputs and support remote control of the wiper and pump over RS-485 with the optional DTWRX board.