Pelco VIPNX2C Stainless Steel Wiper for NXM36 Housings, 24 VAC

Pelco VIPNX2C Stainless Steel Wiper for NXM36 Housings, 24 VAC

The Pelco VIPNX2C is a 24 VAC wiper kit made of AISI 316L stainless steel that installs directly on the body of NXM36 stainless steel housings. The steel blade and enclosure resist corrosion in marine and offshore sites, and the kit integrates a support for the washer injector fed by a Pelco washer pump. The VIPNX1C and VIPNX2C carry Lloyd's Register Marine Type Approval.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Mount the wiper on the NXM36 housing body and wire it through its 3+1 pin connector. Connect the washer pump line to the integrated injector support; the DTWRX receiver enables remote wiper and pump control in stand-alone housings.

Compatible Products

• NXM36K1000 stainless housing
• NXM36K1050 stainless housing
• NXM36K2000 stainless housing
• NXM36K2700 Hi-PoE stainless housing

Related Products

• Pelco OSPAVIPNXMC replacement wiper blade
• Pelco WASNX2V10L20M00 washer tank, 24 VAC
• Pelco WAS0V5L5M00 washer kit
• Pelco DTWRX wiper and pump receiver

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco VIPNX2C

Which housings does the VIPNX2C fit?

Pelco makes it for the NXM36 series stainless steel housings, including the NXM36 Hi-PoE.

What power does it need?

24 VAC at 290 mA max, 50/60 Hz, through a 3+1 pin connector.

What is it made of?

The wiper blade and enclosure are AISI 316L stainless steel.

Can it work with a washer?

Yes. It integrates a support for the washer injector fed by a Pelco washer pump kit.

Is it certified for marine use?

Yes. The VIPNX1C and VIPNX2C carry Lloyd's Register Marine Type Approval.

Is a replacement blade available?

Yes, the OSPAVIPNXMC complete wiper blade.