Pelco FMCI-PF2 Dual-Channel 10/100 Mbps Fiber Media Converter, SFP
Description
Pelco FMCI-PF2 Dual-Channel 10/100 Mbps Fiber Media Converter, SFP
The Pelco FMCI-PF2 is a standard-size, two-channel 10/100 Mbps Ethernet fiber media converter that links IP cameras and network equipment over optical fiber. The RJ-45 port autonegotiates 10/100 Mbps and the optical port runs at 100 Mbps full duplex through a customer-installed FSFP small form-factor pluggable module, ordered separately, which sets the fiber type, connector and distance, such as the FSFP-EFSM2LC20. It runs on 8 to 15 VDC and mounts on a surface or in one slot of the USRACK card cage. It is hardened for -40 to 75 C operation in traffic, transportation and campus installations.
Key Specifications
| Part number | FMCI-PF2 |
| Type | Standard-size two-channel Ethernet media converter |
| Channels | 2 |
| Electrical port | RJ-45, 10/100 Mbps, auto MDI/MDI-X |
| Optical port | 100 Mbps full duplex via FSFP module (sold separately) |
| Power input | 8 to 15 VDC |
| Power consumption | 2 W |
| Mounting | Surface (wall) or USRACK card cage |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
Full specifications are listed in the Detailed Specifications tab.
Installation
Insert the FSFP module into the optical port and connect the fiber, connect the camera or switch to the RJ-45 port, and apply power to the terminal block or slide the unit into a USRACK slot. Converters at each end of the link must use compatible FSFP modules and the same fiber type.
Compatible Products
Use Pelco FSFP modules matched to the 100 Mbps optical rate; other Pelco FSFP fiber and connector options are available.
Related Products
- Pelco FMCI-PF1M Mini 10/100 Mbps Fiber Media Converter
- Pelco FMCI-PF1POE 10/100 Mbps Fiber Media Converter with PoE+ Output
- Pelco FMCI-PG2 Dual-Channel Gigabit Fiber Media Converter
- Pelco USRACK 14-Slot Fiber Module Card Cage
Explore More
- Shop Converters at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco FMCI-PF2
Does the FMCI-PF2 include an SFP module?
No. It requires a Pelco FSFP module, ordered separately, which sets the fiber type, number of fibers, connector and distance. Pelco FSFP modules are required to qualify for the manufacturer warranty.
What data rates does it support?
The RJ-45 port autonegotiates 10/100 Mbps, full or half duplex. The optical port runs at 100 Mbps full duplex, so use a 100 Mbps Fast Ethernet FSFP module.
How far can it send data over fiber?
Distance depends on the FSFP module chosen.
How is it powered?
It accepts 8 to 15 VDC through a terminal block, or takes power from the USRACK card cage when rack mounted. Pelco recommends the FEXTPS external power supply for standalone use.
Can it be rack mounted?
Yes. It occupies one slot in the Pelco USRACK 4RU card cage, or it can be surface mounted.
Is it rated for outdoor cabinets?
It operates from -40 to 75 C, 0 to 95 percent noncondensing humidity, and is designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal equipment environmental standards.
Detailed Specifications
Pelco FMCI-PF2 Specifications
| Specification | Details |
|---|---|
| General | |
| Model | FMCI-PF2 |
| Description | Standard-size two-channel 10/100 Mbps Ethernet media converter, requires FSFP module |
| Channels | 2 |
| Electrical | |
| Electrical port | RJ-45, IEEE 802.3, 10/100 Mbps, autonegotiating, full or half duplex |
| MDI/MDI-X | Automatic |
| Power input | 8 to 15 VDC |
| Power connector | Terminal block |
| Power consumption | 2 W |
| LED indicators | Optical link, data activity |
| MTBF | Greater than 100,000 hours |
| Optical | |
| Optical data rate | 100 Mbps, full duplex |
| Wavelength, fibers, connector | Set by the FSFP module (sold separately) |
| Fiber requirements | Multimode ITU-T G.651; single-mode ITU-T G.652 |
| Mechanical | |
| Size | Standard-size |
| Mounting | Surface (wall) or USRACK card cage |
| Rack slots | 1 slot (USRACK card cage) |
| Dimensions | 6.1 D x 5.3 W x 1.1 H in (15.5 x 13.5 x 2.8 cm) |
| Unit weight | Under 1.00 lb (0.45 kg) |
| Environmental | |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
| Storage temperature | -40 to 85 C (-40 to 185 F) |
| Relative humidity | 0 to 95 percent, noncondensing |
| Certifications | |
| Approvals | CE, FCC Part 15, UL Listed, C-Tick, IEEE 802.3 |
| Standards | Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards |
| Accessories | |
| Required | Pelco FSFP module(s), sold separately |
| Recommended power supply | FEXTPS (100-240 VAC in, 9 VDC out) |
| Rack chassis | USRACK |
| Shipping | |
| Shipping weight | 2.00 lb (0.90 kg) |
Related Products
Related Products
BSS Audio Single Mode Fiber Media Converter, MC-1
Brand: BSS Audio
AXIS TU8008 DIN-Rail Media Converter with 2 SFP Ports, 03534-001
Brand: AXIS Communications
Hanwha Vision TMC-FSFPPOE30M Mini 100M Media Converter
Brand: Hanwha Vision America
Pelco EXPE2-CABFIBARM10 10 m Armored Fiber Cable, ExSite Enhanced 2
Brand: Pelco
Pelco WBOVA2 Wall Bracket with Internal Cable Channel for Housings
Brand: Pelco
Hanwha Vision TMC-GSFP 1000M Multi-Rate Media Converter
Brand: Hanwha Vision America