Pelco Esprit Enhanced ES6230-12P 2MP 30x Pressurized PTZ Camera
Description
Pelco Esprit Enhanced ES6230-12P 2MP 30x Pressurized PTZ Camera
The Pelco Esprit Enhanced ES6230-12P is a 2MP Full HD positioning system with a 30x optical zoom, a pressurized Integrated Optics Cartridge and an integrated window wiper. SureVision 3.0 brings 130 dB wide dynamic range and color down to 0.03 lux, while the powder-coated aluminum pan/tilt rotates 360° continuously and reaches presets at 140° per second. It is built for campuses, harbors, highways and other large open areas, and runs on HPoE, 24 VAC or 48 VDC.
Key Specifications
| Max video resolution | 1920 x 1080 (2MP) |
| Max frames per second | Up to 60 images per second |
| Lens | 4.3 to 129.0 mm, f/1.6 to f/4.7; 30x optical, 12x digital zoom |
| Horizontal field of view | 63.7° (wide) to 2.3° (tele) |
| Wide dynamic range | 130 dB (SureVision 3.0) |
| Min illumination (color) | 0.03 lux (33 ms); 0.008 lux (250 ms) |
| Pan/tilt | 360° continuous pan; tilt +40° to -90°; presets at 140°/sec |
| Presets/tours | 256 presets, 16 tours, 8 patterns, 8 scans |
| Analytics | Nine Pelco behaviors including AutoTracker |
| Power | HPoE (802.3bt Class 8), 24 VAC or 48 VDC; 72 VA max |
| Enclosure | Pressurized IOC (10 psig dry nitrogen) with wiper; NEMA 4X and IP66; housing IK10 |
| Operating temperature | -45° to 60°C (-50° to 140°F) |
Full specifications are listed in the Detailed Specifications tab.
Why Choose the Pelco Esprit Enhanced ES6230-12P?
- Full HD 1080p at up to 60 images per second with a 30x optical zoom
- SureVision 3.0: 130 dB WDR, anti-bloom, 3D noise filtering and three-level defog
- Pressurized optics cartridge with dry nitrogen eliminates internal condensation and corrosion
- Integrated window wiper, heater, defroster and sun shroud
- Nine built-in Pelco analytics behaviors, including AutoTracker
- Flexible power: HPoE (802.3bt Class 8), 24 VAC or 48 VDC
- Two SFP ports for fiber, Ethernet over coax or UTP extension
- NDAA compliant per Pelco, with 256 presets and 16 tours
SureVision 3.0 Image Quality
The 1/2.8-inch Exmor CMOS camera delivers 1920 x 1080 video with 130 dB of true wide dynamic range and color sensitivity down to 0.03 lux (0.008 lux at 250 ms). Image defog, five white balance modes and Vivid mode help in fog, rain and sodium-vapor lighting, and electronic image stabilization reduces the effect of vibration.
30x Zoom and Precise Positioning
The 4.3 to 129.0 mm lens zooms from a 63.7° wide view to 2.3° at full tele. The pan/tilt rotates 360° continuously, tilts from +40° to -90°, and moves to presets at 140° per second with ±0.1° accuracy. Proportional pan/tilt slows movement as you zoom in.
Built-In Analytics
Nine user-configurable behaviors cover abandoned objects, adaptive motion detection, auto tracking, camera sabotage, directional motion, loitering, object counting, object removal and stopped vehicles, with up to two running at the same time.
Built for Harsh Weather
The dry-nitrogen IOC is pressurized to 10 psig and monitored by internal sensors. A thermostatically controlled heater and window defroster let the unit de-ice and run from -25°C within two hours of power-up, and the system keeps full motion control in winds up to 65 knots.
Installation and Connectivity
The ES6230-12P runs on HPoE (802.3bt Class 8), 24 VAC or 48 VDC with a 72 VA maximum. A 100Base-TX Ethernet port and two SFP ports support fiber, Ethernet over coax and UTP extension, and an SDXC slot up to 2 TB stores clips on alarms and during network outages.
Typical Applications
- Campus perimeters and open grounds
- Highways, bridges and traffic corridors
- Seaports, harbors and airports
- Industrial plants and yards
- City surveillance and large parking areas
Compatible Accessories
Compatible accessories for the Pelco Esprit Enhanced ES6230-12P. Linked items are available at Affinitech Store; contact us for the others:
- Pelco POE90U1BT 90W High PoE Single-Port Injector (802.3bt 90 W midspan)
- Pelco EWM Esprit Wall Mount
- Pelco EPM Pole Mount Adapter (for use with EWM)
- Pelco ECM101 Corner Mount Adapter (for use with EWM)
- Pelco EPP2 Esprit Pedestal Adapter and PM2000/PM2010 Pedestal Mount
- Pelco ECPS-48VDC-5A 48 VDC Indoor Power Supply
- Pelco WCS1-4 24 VAC Environmental Power Supply
- Pelco ES-BLADE-2 / ES-BLADE-10 Replacement Wiper Blades (2-pack / 10-pack)
Compare Pelco Esprit Enhanced Pressurized PTZ Cameras
| Model | Max resolution | Type | Best for |
|---|---|---|---|
| Pelco Esprit Enhanced ES6230-12P (this camera) | 1920 x 1080 (2MP) | 30x pressurized PTZ with wiper, no illuminator; HPoE, 24 VAC or 48 VDC | Campuses, harbors and highways where power is via HPoE or 24 VAC |
| Pelco Esprit Enhanced ES6230-12P-RW | 1920 x 1080 (2MP) | 30x pressurized PTZ with wiper, IR plus white light; 48 VDC | Perimeters and yards that need night coverage and visible deterrence |
Need night coverage? See the Pelco Esprit Enhanced ES6230-12P-RW with IR and white light illumination.
Explore More
- Browse all PTZ Cameras at Affinitech Store
- Shop Outdoor Cameras at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco Esprit Enhanced ES6230-12P
What resolution does the Pelco Esprit Enhanced ES6230-12P capture?
Up to 1920 x 1080 (2MP Full HD) at up to 60 images per second.
What zoom and lens does it have?
A 30x optical zoom lens, 4.3 mm to 129.0 mm, f/1.6 to f/4.7, with 12x digital zoom. The horizontal angle of view runs from 63.7° wide to 2.3° tele.
What does the pressurized cartridge do?
The pressurized Integrated Optics Cartridge is filled with dry nitrogen at 10 psig, which keeps condensation and corrosion out of the camera cartridge. Sensors monitor the pressure and report it in the web interface.
How fast does it pan and tilt?
Pan rotates 360° continuously. Preset and turbo speeds reach 140° per second; manual pan runs 0.1° to 80° per second and manual tilt 0.1° to 40° per second, with tilt from +40° to -90°.
Which analytics are built in?
Nine Pelco analytics behaviors: Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal and Stopped Vehicle. Up to two can run at the same time.
What temperatures can it handle?
It operates from -45° to 60°C (-50° to 140°F) and can de-ice and be operational from -25°C (-13°F) within two hours after power-up.
How many presets and tours does it support?
256 presets, 16 preset tours, 8 patterns, 8 scans and 32 window blanks.
Does it support local recording?
Yes. An SDXC card addressable up to 2 TB can capture clips on alarms and record continuously during a network outage.
Which video systems does it work with?
Pelco VideoXpert, Endura 2.0 or later and Digital Sentry 7.3 or later, plus ONVIF Profile S, G and T conformant platforms.
How is the ES6230-12P powered?
It accepts HPoE (IEEE 802.3bt Class 8), 24 VAC or 48 VDC, with a maximum power consumption of 72 VA with heaters on.
Does it have an illuminator?
No. The ES6230-12P has no illuminator. The ES6230-12P-RW adds IR and white light illumination and runs on 48 VDC.
Detailed Specifications
Pelco Esprit Enhanced ES6230-12P Specifications
| Specification | Details |
|---|---|
| Model | |
| Model | ES6230-12P |
| Description | Esprit Enhanced 6 1080P, wiper, pressurized, HPoE/24 VAC/48 VDC |
| Enclosure type | Pressurized Integrated Optics Cartridge (IOC) and wiper |
| Illuminator | None |
| Camera/Optics | |
| Sensor type | 1/2.8-inch Exmor CMOS |
| Maximum resolution | 1920 x 1080 |
| Optical zoom | 30x |
| Digital zoom | 12x |
| Lens | f/1.6 to f/4.7, focal length 4.3 mm (wide) to 129.0 mm (tele) |
| Horizontal angle of view | 63.7° (wide) to 2.3° (tele) |
| Light sensitivity, color | 0.03 lux (33 ms); 0.008 lux (250 ms) |
| Light sensitivity, mono | 0.004 lux (33 ms); 0.001 lux (250 ms) |
| Sensitivity note | Lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE with Sensitivity Boost off; 4X improvement with Sensitivity Boost on |
| Day/night | Yes, IR cut filter |
| Shutter range | 1/1 to 1/10,000 sec |
| Signal-to-noise ratio | >50 dB |
| Wide dynamic range | 130 dB |
| Iris control | Auto iris with manual override |
| Backlight compensation | Yes |
| Automatic gain control | Yes |
| Noise filtering | 3D noise filtering |
| Electronic image stabilization | Yes |
| Video | |
| Video encoding | H.264 High, Main or Base profiles and MJPEG |
| Video streams | Up to 2 simultaneous streams; the second stream depends on the primary stream setup |
| Frame rate | Up to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on coding, resolution and stream configuration) |
| Aspect ratio | 16:9 |
| H.264 High Profile resolutions (max IPS, recommended bit rate) | 1920 x 1080 16:9 at 60 (8.00 Mbps) or 30 (6.05 Mbps); 1280 x 720 at 30 (3.00 Mbps); 800 x 448 at 30 (2.00 Mbps); 640 x 352 at 30 (1.80 Mbps); 1280 x 960 4:3 at 30 (3.80 Mbps); 800 x 608 at 30 (2.00 Mbps); 640 x 480 at 30 (1.45 Mbps); 320 x 240 at 30 (0.50 Mbps) |
| Network | |
| Interface | Ethernet (100Base-TX), Auto MDI/MDI-X, auto-negotiate |
| Cabling | Cat5e or better |
| SFP interface | 2 SFP ports; supports SFP transceivers (fiber, Ethernet over coax, UTP extension) |
| Protocols | TCP/IP, UDP/IP (unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6 (mixed IPv4/IPv6 only), SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, 802.1x (EAP), NTCIP 1205 |
| Users | Unicast up to 20 simultaneous users depending on resolution settings (2 guaranteed streams); multicast unlimited users (H.264) |
| Security access | Password protected, 802.1x, HTTPS |
| Software interface | Web browser view and setup |
| Pelco system integration | VideoXpert Enterprise and VideoXpert 2.0 or later; Endura 2.0 or later; Digital Sentry 7.3 or later |
| Open API | Pelco API; ONVIF Profile S, Profile G and Profile T |
| Mobile application | Pelco Mobile App |
| Local storage | SDXC card, addressable up to 2 TB; 1, 5 or 10 second clips on sabotage, motion or alarm; continuous recording during network outage; access via FTP and ONVIF Profile G |
| Software Features | |
| Presets and tours | 256 presets, 16 tours, ±0.1° preset accuracy |
| Scans and patterns | 8 configurable frame scans; 8 recordable patterns, 5 minutes each |
| Privacy | 32 window blanks, configurable in size, with 5 window blur options |
| Other | Configurable park with actions; proportional pan/tilt; image defog modes; multilingual menus; password protection |
| Video motion detection | Simple motion detection and camera sabotage |
| Pelco analytics | Nine user-configurable behaviors (Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal, Stopped Vehicle); up to two run at the same time |
| Mechanical | |
| Pan movement | 360° continuous pan rotation |
| Vertical tilt | Unobstructed +40° to -90° |
| Variable speed | 0.1° to 140° |
| Manual pan/tilt speeds | Pan 0.1° to 80°/sec; tilt 0.1° to 40°/sec |
| Preset speeds | 140°/sec |
| Pressurized cartridge (IOC) | Dry nitrogen pressurized to 10 psig nominal (sea level, 21°C); internal pressure sensor; designed to IP67 standards |
| Window wiper | Integrated, configurable delay and shut-off; replaceable blade |
| Heater and defroster | Thermostatically controlled; built-in heater, window defroster/defogger and sun shroud |
| Electrical | |
| Input voltage | HPoE (IEEE 802.3bt Class 8), 24 VAC, 48 VDC; input voltage range ±10% |
| Max power consumption (with heaters) | 72 VA (24 VAC, HPoE or 48 VDC) |
| Electrical connections | Screw terminals for power |
| General | |
| Construction | Die-cast, extruded and sheet aluminum; stainless steel hardware |
| Finish | Gray polyester powder coat |
| Operating temperature | -45° to 60°C (-50° to 140°F) ambient sustained; 74°C (165.2°F) absolute maximum ambient per NEMA TS-2; de-ices and operates from -25°C (-13°F) within two hours after power-up; cold start from -40°C |
| Storage temperature | -20° to 60°C (-4° to 140°F) |
| Operating humidity | 10 to 100% relative humidity (condensing) with IOC |
| Impact resistance | Metal housing IK10; IOC window IK7 |
| Wind | Full motion control 0 to 65 knots (75 mph); limited speed control 65 to 78 knots (90 mph); survives 78 to 130 knots (150 mph) |
| Alarms | Four inputs, open/closed (unsupervised) or open/short with external 1k-ohm resistor (supervised); 3.5 VDC, 3.5 mA maximum |
| Relay outputs | Two; 30 VDC, 1 A maximum; wire length under 3 m (9.84 ft) |
| Audio | Line level/external microphone input, 600-ohm differential, 1 Vp-p maximum; embedded audio streaming |
| Unit weight | 13.56 kg (30 lb) with wiper and IOC |
| Shipping weight | 17.44 kg (38 lb) |
| Effective projected area | 193 square inches |
| Certifications | |
| Certifications | CE Class A; FCC Class A; KCC; UL/cUL Listed; C-Tick |
| Environmental ratings | Meets NEMA Type 4X and IP66 standards; NEMA TS-2 (Temp.) para 2.2.7.3 to 2.2.7.7 |
| Shock and vibration | Shock per IEC 60068-2-27 Ea; vibration per IEC 60068-2-6 Fc; impact per IEC 62262 |
| ONVIF | Profile S, Profile G, Profile T |
| Other | Cisco Medianet Media Services Proxy 2.0 compatible; NDAA compliant and FIPS 140-2 listed by Pelco for Esprit Enhanced Pressurized PTZ |
| Optional Accessories | |
| Mounts and adapters | EWM Esprit wall mount; EPM pole mount adapter (with EWM); ECM101 corner mount adapter (with EWM); EPP2 pedestal adapter (with PM20/PM2010); PM2000/PM2010 pedestal mount |
| Wiper blades | ES-BLADE-2 (2-pack); ES-BLADE-10 (10-pack) |
| Recommended power supplies | ECPS-48VDC-5A 48 VDC indoor power supply; Pelco single-port IEEE 802.3bt Type 4, GbE, 90 W 4-pair PoE indoor midspan; WCS1-4 24 VAC environmental power supply |
Related Products
Related Products
Pelco Esprit Enhanced ES6230-12P-R2 2MP 30x Pressurized IR PTZ Camera
Brand: Pelco
Pelco Esprit Enhanced ES6230-02 2MP 30x PTZ Camera
Brand: Pelco
Pelco Esprit Enhanced ES6230-05 2MP 30x PTZ Camera
Brand: Pelco
Pelco Esprit Enhanced ES6230-15 2MP 30x Wiper PTZ Camera
Brand: Pelco
Pelco Esprit Enhanced ES6230-12 2MP 30x Wiper PTZ Camera
Brand: Pelco