Pelco Esprit Enhanced ES6230-12P-RW 2MP 30x IR/White Light PTZ Camera

Brand: Pelco
SKU:
ES6230-12P-RW
Condition:
New
(No reviews yet) Write a Review
Price: $7,473.80

Description

Pelco Esprit Enhanced ES6230-12P-RW 2MP 30x PTZ with IR and White Light

The Pelco Esprit Enhanced ES6230-12P-RW is a 2MP Full HD pressurized PTZ with a 30x optical zoom, an integrated wiper and dual-mode illumination: vari-zoom IR up to 100 m and white light up to 250 m. Switch from discreet IR to visible white light with a click for deterrence, while SureVision 3.0 delivers 130 dB WDR. It runs on 48 VDC and suits perimeters, yards, ports and other large open areas.

Key Specifications

Max video resolution 1920 x 1080 (2MP)
Max frames per second Up to 60 images per second
Lens 4.3 to 129.0 mm, f/1.6 to f/4.7; 30x optical, 12x digital zoom
Horizontal field of view 63.7° (wide) to 2.3° (tele)
Wide dynamic range 130 dB (SureVision 3.0)
Min illumination (color) 0.03 lux (33 ms); 0.008 lux (250 ms)
Built-in IR 850 nm vari-zoom IR up to 100 m (dual mode)
White light Adjustable up to 250 m
Pan/tilt 360° continuous pan; tilt +40° to -90°; presets at 140°/sec
Power 48 VDC; 120 VA max with heaters
Enclosure Pressurized IOC (10 psig dry nitrogen) with wiper; NEMA 4X and IP66; housing IK10
Operating temperature -45° to 60°C (-50° to 140°F)

Full specifications are listed in the Detailed Specifications tab.

Why Choose the Pelco Esprit Enhanced ES6230-12P-RW?

  • Dual-mode illumination: IR up to 100 m and white light up to 250 m, switchable with a click
  • Full HD 1080p at up to 60 images per second with a 30x optical zoom
  • SureVision 3.0 with 130 dB WDR and color down to 0.03 lux
  • Pressurized dry-nitrogen optics cartridge with integrated wiper, heater and defroster
  • Nine built-in Pelco analytics behaviors, including AutoTracker
  • Two SFP ports for fiber, Ethernet over coax or UTP extension
  • NDAA compliant per Pelco, with 256 presets and 16 tours

IR and White Light Illumination

The dual-mode illuminator combines a vari-zoom 850 nm IR bank, which matches the camera's field of view and adapts its intensity across the zoom range up to 100 m, with a white light bank adjustable up to 250 m. Operators can switch between discreet IR and visible white light with a click, adding deterrence when an event is detected.

SureVision 3.0 Image Quality

The 1/2.8-inch Exmor CMOS camera delivers 1920 x 1080 video with 130 dB of true wide dynamic range and color sensitivity down to 0.03 lux. Image defog, five white balance modes and Vivid mode help in fog, rain and sodium-vapor lighting.

30x Zoom and Precise Positioning

The 4.3 to 129.0 mm lens zooms from a 63.7° wide view to 2.3° at full tele. The pan/tilt rotates 360° continuously, tilts from +40° to -90°, and reaches presets at 140° per second with ±0.1° accuracy.

Built for Harsh Weather

The dry-nitrogen IOC is pressurized to 10 psig and monitored by internal sensors. A heater, window defroster, wiper and sun shroud keep the view clear, and the system keeps full motion control in winds up to 65 knots.

Installation and Connectivity

The ES6230-12P-RW runs on 48 VDC with a 120 VA maximum (heaters and illuminators on). A 100Base-TX Ethernet port and two SFP ports support fiber, Ethernet over coax and UTP extension, and an SDXC slot up to 2 TB stores clips on alarms and during network outages.

Typical Applications

  • Perimeters and fence lines that need visible deterrence
  • Ports, harbors and rail yards
  • Highways, bridges and traffic corridors
  • Industrial plants and utility sites
  • Large parking areas and campuses

Compatible Accessories

Compatible accessories for the Pelco Esprit Enhanced ES6230-12P-RW. Linked items are available at Affinitech Store; contact us for the others:

  • Pelco ECPS-48VDC-5A 48 VDC Indoor Power Supply
  • Pelco EWM Esprit Wall Mount
  • Pelco EPM Pole Mount Adapter (for use with EWM)
  • Pelco ECM101 Corner Mount Adapter (for use with EWM)
  • Pelco EPP2 Esprit Pedestal Adapter and PM2000/PM2010 Pedestal Mount
  • Pelco ES-BLADE-2 / ES-BLADE-10 Replacement Wiper Blades (2-pack / 10-pack)

Compare Pelco Esprit Enhanced Pressurized PTZ Cameras

ModelMax resolutionTypeBest for
Pelco Esprit Enhanced ES6230-12P1920 x 1080 (2MP)30x pressurized PTZ with wiper, no illuminator; HPoE, 24 VAC or 48 VDCCampuses, harbors and highways where power is via HPoE or 24 VAC
Pelco Esprit Enhanced ES6230-12P-RW (this camera)1920 x 1080 (2MP)30x pressurized PTZ with wiper, IR plus white light; 48 VDCPerimeters and yards that need night coverage and visible deterrence

Don't need illumination? See the Pelco Esprit Enhanced ES6230-12P, which also runs on HPoE or 24 VAC.

Explore More

Frequently Asked Questions About the Pelco Esprit Enhanced ES6230-12P-RW

What resolution does the Pelco Esprit Enhanced ES6230-12P-RW capture?

Up to 1920 x 1080 (2MP Full HD) at up to 60 images per second.

How far do the IR and white light reach?

In dual mode the vari-zoom 850 nm IR reaches up to 100 m and the white light is adjustable up to 250 m. You can switch between them with a click.

What zoom and lens does it have?

A 30x optical zoom lens, 4.3 mm to 129.0 mm, f/1.6 to f/4.7, with 12x digital zoom. The horizontal angle of view runs from 63.7° wide to 2.3° tele.

What does the pressurized cartridge do?

The pressurized Integrated Optics Cartridge is filled with dry nitrogen at 10 psig, which keeps condensation and corrosion out of the camera cartridge. Sensors monitor the pressure and report it in the web interface.

How fast does it pan and tilt?

Pan rotates 360° continuously. Preset and turbo speeds reach 140° per second; manual pan runs 0.1° to 80° per second and manual tilt 0.1° to 40° per second, with tilt from +40° to -90°.

Which analytics are built in?

Nine Pelco analytics behaviors: Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal and Stopped Vehicle. Up to two can run at the same time.

How many presets and tours does it support?

256 presets, 16 preset tours, 8 patterns, 8 scans and 32 window blanks.

Does it support local recording?

Yes. An SDXC card addressable up to 2 TB can capture clips on alarms and record continuously during a network outage.

Which video systems does it work with?

Pelco VideoXpert, Endura 2.0 or later and Digital Sentry 7.3 or later, plus ONVIF Profile S, G and T conformant platforms.

How is the ES6230-12P-RW powered?

It runs on 48 VDC. Maximum power consumption with heaters and illuminators is 120 VA.

View AllClose

Detailed Specifications

Pelco Esprit Enhanced ES6230-12P-RW Specifications

SpecificationDetails
Model
ModelES6230-12P-RW
DescriptionEsprit Enhanced 6 1080P SureVision; wiper; 48 VDC; IR and white light; pressurized
Enclosure typePressurized Integrated Optics Cartridge (IOC) and wiper
IlluminatorDual mode: IR and white light LED banks
Camera/Optics
Sensor type1/2.8-inch Exmor CMOS
Maximum resolution1920 x 1080
Optical zoom30x
Digital zoom12x
Lensf/1.6 to f/4.7, focal length 4.3 mm (wide) to 129.0 mm (tele)
Horizontal angle of view63.7° (wide) to 2.3° (tele)
Light sensitivity, color0.03 lux (33 ms); 0.008 lux (250 ms)
Light sensitivity, mono0.004 lux (33 ms); 0.001 lux (250 ms)
Sensitivity noteLux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE with Sensitivity Boost off; 4X improvement with Sensitivity Boost on
Day/nightYes, IR cut filter
Shutter range1/1 to 1/10,000 sec
Signal-to-noise ratio>50 dB
Wide dynamic range130 dB
Iris controlAuto iris with manual override
Backlight compensationYes
Automatic gain controlYes
Noise filtering3D noise filtering
Electronic image stabilizationYes
IR illumination rangeDual mode: vari-zoom up to 100 m
IR wavelength850 nm
White light illumination rangeDual mode: adjustable up to 250 m (greater than 20% mean pixel value brightness increase in color mode)
Video
Video encodingH.264 High, Main or Base profiles and MJPEG
Video streamsUp to 2 simultaneous streams; the second stream depends on the primary stream setup
Frame rateUp to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on coding, resolution and stream configuration)
Aspect ratio16:9
H.264 High Profile resolutions (max IPS, recommended bit rate)1920 x 1080 16:9 at 60 (8.00 Mbps) or 30 (6.05 Mbps); 1280 x 720 at 30 (3.00 Mbps); 800 x 448 at 30 (2.00 Mbps); 640 x 352 at 30 (1.80 Mbps); 1280 x 960 4:3 at 30 (3.80 Mbps); 800 x 608 at 30 (2.00 Mbps); 640 x 480 at 30 (1.45 Mbps); 320 x 240 at 30 (0.50 Mbps)
Network
InterfaceEthernet (100Base-TX), Auto MDI/MDI-X, auto-negotiate
CablingCat5e or better
SFP interface2 SFP ports; supports SFP transceivers (fiber, Ethernet over coax, UTP extension)
ProtocolsTCP/IP, UDP/IP (unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6 (mixed IPv4/IPv6 only), SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, 802.1x (EAP), NTCIP 1205
UsersUnicast up to 20 simultaneous users depending on resolution settings (2 guaranteed streams); multicast unlimited users (H.264)
Security accessPassword protected, 802.1x, HTTPS
Software interfaceWeb browser view and setup
Pelco system integrationVideoXpert Enterprise and VideoXpert 2.0 or later; Endura 2.0 or later; Digital Sentry 7.3 or later
Open APIPelco API; ONVIF Profile S, Profile G and Profile T
Mobile applicationPelco Mobile App
Local storageSDXC card, addressable up to 2 TB; 1, 5 or 10 second clips on sabotage, motion or alarm; continuous recording during network outage; access via FTP and ONVIF Profile G
Software Features
Presets and tours256 presets, 16 tours, ±0.1° preset accuracy
Scans and patterns8 configurable frame scans; 8 recordable patterns, 5 minutes each
Privacy32 window blanks, configurable in size, with 5 window blur options
OtherConfigurable park with actions; proportional pan/tilt; image defog modes; multilingual menus; password protection
Video motion detectionSimple motion detection and camera sabotage
Pelco analyticsNine user-configurable behaviors (Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal, Stopped Vehicle); up to two run at the same time
Mechanical
Pan movement360° continuous pan rotation
Vertical tiltUnobstructed +40° to -90°
Variable speed0.1° to 140°
Manual pan/tilt speedsPan 0.1° to 80°/sec; tilt 0.1° to 40°/sec
Preset speeds140°/sec
Pressurized cartridge (IOC)Dry nitrogen pressurized to 10 psig nominal (sea level, 21°C); internal pressure sensor; designed to IP67 standards
Window wiperIntegrated, configurable delay and shut-off; replaceable blade
Heater and defrosterThermostatically controlled; built-in heater, window defroster/defogger and sun shroud
Electrical
Input voltage48 VDC; input voltage range ±10%
Max power consumption (with heaters)120 VA (IR plus white light models, 48 VDC)
Electrical connectionsScrew terminals for power
General
ConstructionDie-cast, extruded and sheet aluminum; stainless steel hardware
FinishGray polyester powder coat
Operating temperature-45° to 60°C (-50° to 140°F) ambient sustained; 74°C (165.2°F) absolute maximum ambient per NEMA TS-2; de-ices and operates from -25°C (-13°F) within two hours after power-up; cold start from -40°C
Storage temperature-20° to 60°C (-4° to 140°F)
Operating humidity10 to 100% relative humidity (condensing) with IOC
Impact resistanceMetal housing IK10; IOC window IK7
WindFull motion control 0 to 65 knots (75 mph); limited speed control 65 to 78 knots (90 mph); survives 78 to 130 knots (150 mph)
AlarmsFour inputs, open/closed (unsupervised) or open/short with external 1k-ohm resistor (supervised); 3.5 VDC, 3.5 mA maximum
Relay outputsTwo; 30 VDC, 1 A maximum; wire length under 3 m (9.84 ft)
AudioLine level/external microphone input, 600-ohm differential, 1 Vp-p maximum; embedded audio streaming
Unit weight16.36 kg (36 lb) with wiper, IOC and illuminator
Shipping weight22.43 kg (49 lb)
Effective projected area243 square inches
Certifications
CertificationsCE Class A; FCC Class A; KCC; UL/cUL Listed; C-Tick
Environmental ratingsMeets NEMA Type 4X and IP66 standards; NEMA TS-2 (Temp.) para 2.2.7.3 to 2.2.7.7
Shock and vibrationShock per IEC 60068-2-27 Ea; vibration per IEC 60068-2-6 Fc; impact per IEC 62262
ONVIFProfile S, Profile G, Profile T
OtherCisco Medianet Media Services Proxy 2.0 compatible; NDAA compliant and FIPS 140-2 listed by Pelco for Esprit Enhanced Pressurized PTZ
Optional Accessories
Mounts and adaptersEWM Esprit wall mount; EPM pole mount adapter (with EWM); ECM101 corner mount adapter (with EWM); EPP2 pedestal adapter (with PM20/PM2010); PM2000/PM2010 pedestal mount
Wiper bladesES-BLADE-2 (2-pack); ES-BLADE-10 (10-pack)
Recommended power supplyECPS-48VDC-5A 48 VDC indoor power supply
View AllClose