Pelco CM1751 Light-Duty Wall, Ceiling and Pedestal Camera Mount
Description
Pelco CM1751 Light-Duty Wall, Ceiling and Pedestal Camera Mount
The Pelco CM1751 is a light-duty universal mount kit for installing a box-style camera on a wall, ceiling or pedestal. It fits most box cameras with a 1/4-20 mounting hole weighing up to 7 lb, and its swivel head gives 360 degrees of pan and 90 degrees of tilt adjustment. Two extension tubes (3 in and 7 in) are included so you can set the mount to the length the job needs. The CM1751 is not recommended for use with camera enclosures.
Key Specifications
| Part number | CM1751 |
| Type | Light-duty camera mount (wall, ceiling or pedestal) |
| Compatible with | Box cameras with 1/4-20 mounting hole, up to 7 lb |
| Load capacity | 7 lb (3.18 kg) |
| Adjustment | 360 degree pan, 90 degree tilt swivel head with locking arm |
| Extension tubes | 3 in (8 cm) and 7 in (18 cm), included |
| Finish | Gray polyester powder coat |
| NDAA | NDAA compliant |
Full specifications are listed in the Detailed Specifications tab.
Installation
Choose one extension tube, apply a drop of the supplied thread adhesive and thread it between the ball socket assembly and the mounting base. Fasten the base to the surface through at least two holes with 1/4-20 hardware (not supplied), then attach the camera to the 1/4-20 stud on the swivel head, aim it and tighten the locking arm. Use stainless steel hardware and seal the bolt holes for outdoor surfaces.
Related Products
- Pelco TB1751 Light-Duty T-Bar Ceiling Camera Mount
- Pelco PA101 Pole Mount Adapter
- Pelco WMVE-SR Wall Mount for Pendant Cameras
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco CM1751
What cameras does the Pelco CM1751 fit?
It fits most box-style cameras that have a 1/4-20 mounting hole and weigh up to 7 lb (3.18 kg).
Where can the CM1751 be installed?
It is designed for ceiling or pedestal mounting and can also be used on a wall.
How far can the camera be adjusted?
The swivel head provides 360 degrees of pan and 90 degrees of tilt, and a locking arm holds the position.
What is included with the CM1751?
A mounting base, a 3 in extension tube, a 7 in extension tube, a ball socket assembly with ball stud, anvil, sleeve, mounting nut and locking arm, and a tube of thread adhesive. Mounting hardware is not supplied.
Can I use the CM1751 with a camera housing?
No. Pelco does not recommend the CM1751 for use with enclosures.
Detailed Specifications
Pelco CM1751 Specifications
| Specification | Details |
|---|---|
| General | |
| Model | CM1751 |
| Description | Light-duty universal camera mount for wall, ceiling or pedestal |
| Camera mounting | 1/4-20 threaded stud |
| Maximum load | 7 lb (3.18 kg) |
| Pan adjustment | 360 degrees |
| Tilt adjustment | 90 degrees |
| Color | Gray |
| Finish | Polyester powder coat |
| NDAA | Compliant |
| Installation | |
| Mounting surface | Wall, ceiling or pedestal |
| Surface hardware | 1/4-20 fasteners, minimum two (not supplied) |
| Enclosures | Not recommended |
| Parts Included | |
| Mounting base | 1 |
| Extension tube, 3 in (8 cm) | 1 |
| Extension tube, 7 in (18 cm) | 1 |
| Ball socket assembly | 1 (ball stud, anvil, sleeve, mounting nut, locking arm) |
| Thread adhesive | 1 tube |
| Shipping | |
| Shipping dimensions | 9.6 x 3.6 x 3.7 in |
| Shipping weight | 0.85 lb |
Related Products
Related Products
Pelco TB1751 Light-Duty T-Bar Ceiling Camera Mount
Brand: Pelco
Pelco PM2000 Heavy-Duty Ceiling/Pedestal Mount, 24-Inch
Brand: Pelco
Pelco PM2010 Heavy-Duty Ceiling/Pedestal Mount, 10-Inch
Brand: Pelco
Pelco PA101 Pole Mount Adapter for Light-Duty Wall Mounts, Gray
Brand: Pelco
Pelco PA101-SW Pole Mount Adapter for Light-Duty Wall Mounts, White
Brand: Pelco