Pelco TB1751 Light-Duty T-Bar Ceiling Camera Mount

Pelco TB1751 Light-Duty T-Bar Ceiling Camera Mount

The Pelco TB1751 is a light-duty camera mount with a T-bar clip for hanging a box-style camera from a suspended (drop) ceiling grid. It fits most box cameras with a 1/4-20 mounting hole weighing up to 7 lb, and the swivel head allows 360 degrees of pan and 90 degrees of tilt. Two extension tubes (1 in and 2.75 in) let you choose the drop length. It is not recommended for use with camera enclosures. For solid walls, ceilings or pedestals, see the Pelco CM1751.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation

Squeeze the T-rail clip onto the ceiling T-bar. Apply a drop of the supplied thread adhesive to the extension tube you choose, thread it into the ball socket assembly and attach the assembly to the threaded stud on the clip. Mount the camera on the 1/4-20 stud, aim it and tighten the locking arm.

Related Products

• Pelco CM1751 Light-Duty Wall, Ceiling and Pedestal Camera Mount
• Pelco PA101 Pole Mount Adapter

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco TB1751

What is the Pelco TB1751 used for?

It mounts a box-style camera to the T-bar grid of a suspended (drop) ceiling without cutting the ceiling tile.

What cameras does the TB1751 fit?

Most box-style cameras with a 1/4-20 mounting hole that weigh up to 7 lb (3.18 kg).

How is the camera aimed?

The swivel head provides 360 degrees of pan and 90 degrees of tilt and is held in place with a locking arm.

What is included?

A T-bar clip, a 1 in extension tube, a 2.75 in extension tube, a ball socket assembly with ball stud, anvil, sleeve, mounting nut and locking arm, and a tube of thread adhesive.

Can the TB1751 be used with a camera housing?

No. Pelco does not recommend this mount for use with enclosures.