Hall Research CA10217 Pluggable Terminal Block to two DB9 RS232 Cable, CA10217

This cable connects RS232 output of UHBX-R-PSE to EMX-AMP (or EMX-I-AMP) RS232 IN and from RS232 OUT to a projector. It is used to control the internal functions of EMX-AMP such as changing volume or mute/unmute. There is also a connection from the EMX-AMP RS-232 output to a DB9 Male connector that can be used to for controlling power ON/OFF state of a video projector. The RS-232 output command from EMX-AMP can be initiated based on RS232 input command, video detection, or in case of EMX-I AMP Telnet or ON/OFF buttons in its internal Web GUI.


Note that the RS232 output connector on the cable is a DB9 Male. If the projector has a DB9 Female connector, you can plug the cable directly to it, but some projectors may have unique RS232 control ports such as a Female MiniDin 6-pin connector. In that case, a DB9 F to MiniDin6 Male cable would be needed. Such cables are commercially available.

Features

• Eliminates the need to solder or make special cables
• Compact and convenient
• Speeds up installations
• Professinal high-quality construction
• Control volume setting of EMX-AMP and On/Off state of projector

About Hall Research

Hall Research has been a leader in the design and manufacture of innovative Video over CATx, matrix switchers, scaling and automation products. As the creators of the device that revolutionized Video over Cat5, the Mini-Cat®, Hall Research has risen to prominence in the Audio/Video industry. Our products are used by every major industry in thousands of installations worldwide.