AXIS F41 1080p Single-Channel Modular Camera Main Unit, 0658-001

AXIS F41 Main Unit – 1080p Single-Channel Main Unit for AXIS F Series Sensor Units

The AXIS F41 is a rugged single-channel main unit for the first-generation AXIS F Series. It is not a complete camera: it needs one AXIS F Series sensor unit, such as the AXIS F4005 or F1015, which connects over an RJ12 cable. The main unit handles video processing, network, power and storage, and supports HDTV 1080p at 50/60 fps, WDR – Forensic Capture with sensor units that support it, Axis Zipstream, two-way audio, four configurable I/Os and one SD card slot. It is built for highly discreet surveillance in stores, ATMs, banks, emergency vehicles and buses.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Why Choose the AXIS F41?

• HDTV 1080p at 50/60 fps from one AXIS F Series sensor unit
• WDR – Forensic Capture up to 120 dB with supporting sensor units
• Axis Zipstream for lower bandwidth and storage
• Rugged aluminum casing tested for vibration and shock (IEC 60721-3-5 5M3)
• Two-way audio and four configurable I/Os with 12 V DC output
• RS232 port for external data
• SD card slot plus NAS recording
• Power over Ethernet or 8-28 V DC

How the AXIS F Modular System Works

The AXIS F41 is the brain of the camera: it encodes video, connects to the network and powers one AXIS F Series sensor unit over an RJ12 cable. The small sensor goes where space is tight, while the main unit is installed out of sight.

Resolution and WDR

With a supporting sensor unit, the F41 streams up to 1920x1200 (WUXGA) or 1080p. It runs 1080p at 50/60 fps without WDR, and WUXGA or 1080p with WDR – Forensic Capture at 25/30 fps. WDR handles up to 120 dB depending on the scene.

Audio, I/O and Integration

Two-way audio uses a 3.5 mm mic/line input and line output. A 6-pin terminal block provides four configurable inputs/outputs with 12 V DC output, and a 5-pin terminal block adds RS232. The F41 supports ONVIF Profile G and Profile S, VAPIX and AXIS Camera Application Platform.

Analytics and Storage

AXIS Video Motion Detection, active tampering alarm and audio detection are included, and AXIS Cross Line Detection and AXIS Digital Autotracking are supported. Recordings go to an SD/SDHC/SDXC card (with encryption support) or network-attached storage.

Rugged Installation

The aluminum casing measures 51 x 121 x 121 mm and is tested to IEC 60721-3-5 5M3 for vibration and shock, IEC 60529 IP4X and ECE R10 rev.04 for vehicles. It runs on PoE (Class 3) or 8-28 V DC from -30 °C to 60 °C (-22 °F to 140 °F).

Typical Applications

• ATMs and bank branches
• Retail stores
• Emergency vehicles and buses
• Discreet monitoring with hidden sensors

Compatible Accessories

Compatible sensor units and accessories for the AXIS F41, available at Affinitech Store (most first-generation AXIS F Series products are discontinued, so check stock before ordering):

Sensor units (one required)

• AXIS F4005 Dome Sensor Unit
• AXIS F4005-E Dome Sensor Unit
• AXIS F1004 Sensor Unit
• AXIS F1004 Bullet Sensor Unit
• AXIS F1004 Pinhole Sensor Unit
• AXIS F1005-E Sensor Unit: 3 m cable or 12 m cable
• AXIS F1015 Sensor Unit: 3 m cable or 12 m cable
• AXIS F1025 Sensor Unit: 3 m cable or 12 m cable
• AXIS F1035-E Sensor Unit: 3 m cable or 12 m cable

Mounting and power

• AXIS TF9902 Surface Mount
• AXIS TF9903 DIN Rail Clip
• AXIS T8120 15 W Midspan 1-port

Microphones (AXIS T83 series)

• AXIS T8351 Mk II Microphone 3.5 mm
• AXIS T8353A Microphone 3.5 mm

Compare AXIS F Series Modular Cameras

Starting a new install? Second-generation sensor units such as the AXIS F4105-LRE and F4108 work with current AXIS F91 main units such as the AXIS F9111-R Mk II and AXIS F9114-R Mk II.

Explore More

• Shop Covert Cameras at Affinitech Store
• See the current AXIS F9114-R Mk II Main Unit and AXIS F9111-R Mk II Main Unit

Frequently Asked Questions About AXIS F41

Does the AXIS F41 work on its own?

No. It is a main unit and needs one AXIS F Series sensor unit, such as the AXIS F4005, F1005-E, F1015, F1025 or F1035-E, which connects over an RJ12 cable.

How many sensor units can it connect?

One. For four sensor units on one main unit, see the AXIS F44 or AXIS F34.

What resolution and frame rate does it support?

Up to 1920x1200/1080 (WUXGA/1080p) with sensor units that support it. 1080p runs at 50/60 fps without WDR; WUXGA without WDR and 1080p with WDR run at 25/30 fps.

Does it support WDR?

Yes. WDR – Forensic Capture, up to 120 dB depending on the scene, with sensor units that support this feature.

How is it powered?

By Power over Ethernet (IEEE 802.3af/802.3at Type 1 Class 3, max 7.7 W) or 8-28 V DC (max 7.8 W).

Does it support audio?

Yes. Two-way audio with a 3.5 mm mic/line input and a 3.5 mm line output, encoded in AAC-LC, G.711 or G.726.

What storage does it have?

One SD/SDHC/SDXC card slot (card not included) with SD card encryption, plus recording to network-attached storage.

What I/O connections does it have?

Four configurable inputs/outputs with 12 V DC output (max load 50 mA) on a 6-pin terminal block, and RS232 on a 5-pin terminal block.

What are the operating conditions?

-30 °C to 60 °C (-22 °F to 140 °F), humidity 10-85% RH (non-condensing).

Is the AXIS F41 discontinued?

Yes. Axis has replaced it with the AXIS F9111-R Mk II Main Unit and offers hardware support and RMA service until 2029-04-30. Second-generation sensor units such as the AXIS F4105-LRE are only compatible with second-generation main units and cables.

What is included?

An installation guide, a Windows decoder 1-user license and an AVHS authentication key.

What warranty does it have?

A 5-year Axis warranty.