Pelco SP01-001-AW Pole-Top Mount for Pendant Domes, Gray

Pelco SP01-001-AW Pole-Top Mount for Pendant Domes, Gray

The Pelco SP01-001-AW is a pole-top dome mount for outdoor use with small pendant dome cameras, finished in Pantone 427C gray. It attaches to a rooftop or other smooth horizontal surface and accepts domes that use 1.5-inch NPT pipe. Cable runs through the center of the tube to keep wiring concealed, and the flange matches the British standard 4.0 in (10.16 cm) PCD bolt pattern.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Mounting

Mount the base to a roof or smooth horizontal surface with four 5/16 in (7.94 mm) fasteners (not included). Route the cable up through the center of the tube, then thread the dome onto the 1.5 in NPT fitting.

Related Products

• Pelco SP01-146A-AW 300 mm NPT Extension
• Pelco SP99-321-AW 4-8 ft Telescoping Pole
• Pelco SM-FJB-AW-3991 Conduit Junction Box
• Pelco RFMNT-2001 Large Rooftop Arm Mount
• Pelco IWM-GY Indoor/Outdoor Wall Mount for Pendant Dome Cameras

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco SP01-001-AW

What is the SP01-001-AW used for?

It mounts a small pendant dome camera outdoors on a rooftop or other smooth horizontal surface.

Which cameras fit it?

Pendant domes that use 1.5-inch NPT pipe.

How much weight does it support?

The SP01-001 mount is rated for a maximum load of 18 kg (40 lb).

Can the cable be hidden?

Yes. The cable runs through the center of the tube to conceal the wiring.

What fasteners do I need?

Pelco recommends four 5/16 in (7.94 mm) fasteners, which are not included.

What color is it?

The -AW version is painted Pantone 427C gray. White and light gray versions also exist.