Pelco NET6504-US 4-Channel Rack Mount Video Encoder, US Power Cord
Description
Pelco NET6504-US 4-Channel Rack Mount Video Encoder, US Power Cord
The Pelco NET6504-US is a 4-channel, 1U rack-mount video encoder that converts existing analog CCTV cameras into H.265 or H.264 IP streams any VMS can record. Part of the NET6500 IP Encoder 2 Series, it accepts AHD and TVI cameras up to 8MP as well as standard NTSC/PAL analog video, so you can keep existing cameras and coax cabling while moving to an IP system in stages. It supports ONVIF Profile S, dual streaming, Pelco D, Pelco P and Coaxitron PTZ control, four alarm inputs, a relay output and four audio inputs, and ships with a 12 VDC adapter and US power cord. For larger sites, step up to the 16-channel Pelco NET6516-US.
Key Specifications
| Part number | NET6504-US |
| Type | 4-channel analog to IP video encoder, 1U rack mount |
| Video inputs | 4 x AHD, TVI (up to 8MP) or NTSC/PAL analog |
| Compression | H.265 and H.264, dual streaming |
| Integration | ONVIF Profile S, up to 32 users |
| PTZ control | Pelco D, Pelco P, Coaxitron over coax |
| Audio | 4 inputs, 1 output, G.711 |
| Alarm I/O | 4 inputs, 1 relay output |
| Network | 1 x 10/100 Mbps RJ-45 |
| Power | 12 VDC 3 A adapter, 6 W, US power cord |
| Operating temperature | 0 to 40 C (32 to 104 F) |
| Dimensions and weight | 10.24 x 10.34 x 1.73 in (W x D x H), 3.30 lb |
Full specifications are listed in the Detailed Specifications tab.
Setup
Mount the encoder in a standard rack (1U) or place it on a shelf, connect up to four analog, AHD or TVI cameras to the video inputs, connect the RS-485 port for Pelco D or P PTZ control (or use Coaxitron over the coax), and connect the LAN port to your network. Configure streams in the web interface, then add the encoder to your VMS as an ONVIF Profile S device.
Related Products
- Pelco NET6516-US 16-Channel Rack Mount Video Encoder
- Pelco SM8TAT2SA-NA 10-Port Gigabit Managed PoE+ Switch
- Pelco FMCI-PG1 Gigabit Fiber Media Converter
- Pelco SURGEPR Surge Protector for Ethernet/PoE Lines
Explore More
- Shop Video Encoders at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco NET6504-US
What does the NET6504-US do?
It converts up to four analog CCTV cameras into H.265 or H.264 IP video streams that a VMS can view and record, so existing cameras and coax cabling can stay in place.
Which camera signals does it accept?
AHD and TVI cameras at 8MP, 5MP, 4MP, 3MP, 2MP and 720p, plus standard definition NTSC and PAL analog video.
Will it work with my VMS?
It conforms to ONVIF Profile S, so it can be added to VMS software that supports ONVIF Profile S devices. Up to 32 users can connect.
Can I control PTZ cameras through it?
Yes. It supports Pelco D and Pelco P over its RS-485 port and Coaxitron control over the coax cable.
How is it powered?
It runs from the included 12 VDC, 3 A adapter with a US power cord and draws about 6 W. The 4-channel model has no cooling fan.
What is the difference between the NET6504-US and NET6516-US?
The NET6504-US has 4 video inputs, 4 alarm inputs and a 10/100 Mbps network port in a smaller fanless chassis. The NET6516-US has 16 video inputs, 16 alarm inputs, a Gigabit network port and a cooling fan.
Detailed Specifications
Pelco NET6504-US Specifications
| Specification | Details |
|---|---|
| General | |
| Model | NET6504-US |
| Series | NET6500 IP Encoder 2 Series |
| Description | 4-channel rack-mount analog to IP video encoder, US power cord |
| Rack size | 1U |
| Operating system | Linux |
| Video | |
| Video inputs | 4 channels |
| Input signal types | AHD, TVI (8MP, 5MP, 4MP, 3MP, 2MP, 720p), SD analog (NTSC, PAL) |
| Compression | H.265, H.264 (High, Main and Baseline profiles) |
| Encoding resolutions | CIF, 2CIF, D1, 960H, 720p, 1080p, 3MP, 4MP, 5MP, 8MP |
| Encoding rate | Up to 30 fps, varies with stream configuration |
| Dual streaming | Yes |
| Audio | |
| Audio inputs | 4 channels (10 kOhm, 1 Vrms) |
| Audio output | 1 channel (600 Ohm, 2.8 Vpp) |
| Audio codec | G.711 u-law |
| Alarm and Control | |
| Alarm inputs | 4 channels, pulled up to 5 V via 10 kOhm |
| Alarm output | 1 relay output (120 VAC, 24 VDC) |
| PTZ protocols | Pelco D, Pelco P, Coaxitron |
| RS-485 | 1 |
| USB | 1 |
| Events | Event notification, alarm sensor, video loss, motion detection |
| Watchdog, RTC, buzzer | Yes |
| Network | |
| LAN | 1 x RJ-45, 10/100 Mbps |
| Maximum users | 32 |
| Protocols | RTP, RTSP, RTCP, SMTP, NTP, HTTP, FTP, DDNS, DHCP, UPnP |
| ONVIF | Profile S |
| Browsers | Microsoft Edge, Chrome, Safari, Firefox, Internet Explorer 11 |
| Electrical | |
| Power supply | 12 VDC, 3 A adapter (US power cord) |
| Power consumption | 6 W |
| Cooling fan | None (fanless) |
| Environmental | |
| Operating temperature | 0 to 40 C (32 to 104 F) |
| Humidity | 10 to 90 percent, non-condensing |
| Physical | |
| Dimensions (W x D x H) | 260 x 262.6 x 44 mm (10.24 x 10.34 x 1.73 in) |
| Weight | 1.5 kg (3.30 lb) |
| Certifications | |
| Approvals | UL, cUL, FCC, CE, UKCA, KC |
| Warranty | 3 years |
| Compliance | |
| TAA compliant | Yes |
Related Products
Related Products
Pelco NET6516-US 16-Channel Rack Mount Video Encoder, US Power Cord
Brand: Pelco
AXIS M7116 16-Channel Rack-Mount Video Encoder, 02036-004
Brand: AXIS Communications
Pelco USRACK 14-Slot Fiber Module Card Cage, 4RU, US Power Cord
Brand: Pelco
AXIS M7104 4-Channel Analog Video Encoder, 01679-001
Brand: AXIS Communications
Hanwha Vision SPE-420 4-Channel Network Video Encoder
Brand: Hanwha Vision America