Pelco HOV32K2A700 HOV Hi-PoE IPM Housing for IP Cameras
Description
Pelco HOV32K2A700 HOV Hi-PoE IPM Housing for IP Cameras
The Pelco HOV32K2A700 is an HOV Hi-PoE IPM aluminum camera housing that powers a PoE IP camera and its housing options from a single Ethernet cable. Intelligent Power Management detects the connected heater, fan and illuminator and balances the available PoE power between them. On PoE class 3 it powers a class 2 camera and demisting; on Hi-PoE class 4 it powers a class 3 camera plus either a GEKO IRH illuminator or heating for operation down to -30 C (-22 F). Hi-PoE operation needs an IEEE 802.3at source such as the OHEPOWINJ injector, and the housing is pre-arranged for a GEKO IRH low-power illuminator.
Key Specifications
| Part number | HOV32K2A700 |
| Type | Hi-PoE IPM outdoor camera housing (HOV series) |
| Configuration | PoE/Hi-PoE powered with IPM, demisting, illuminator or heater support |
| Power input | PoE class 3 (13 W) or Hi-PoE class 4 (25 W) |
| Camera power available | Up to PoE class 3 (13 W) on Hi-PoE |
| Usable interior | 100 x 70 x 250 mm (3.9 x 2.7 x 9.8 in) |
| Protection | IP66/IP67, IK10 (except glass) |
| Operating temperature | -10 to +60 C (14 to 140 F); -30 to +60 C (-22 to 140 F) with heater on Hi-PoE |
| Material | Aluminum body, ABS sunshield, RAL 9002 finish |
| Weight | 3.1 kg (6.6 lb) |
Full specifications are listed in the Detailed Specifications tab.
Installation
Set the DIP switch for PoE class 3 or Hi-PoE class 4 input, then run a single Ethernet cable through the special RJ45 gland, which lets you connect and disconnect without cutting the connector. Use the OWBIP3 sealing rings with the WBOVA2 bracket for IP66 cable-channel mounting.
Compatible Products
- WBJA wall mount bracket
- WBOVA2 wall bracket with internal cable channel
- WCM3A ceiling bracket
- WFWCA column bracket
- WCWA corner mount adapter
- WSFPA pole mount adapter
- DBHWGC pole adapter
- WCPA reinforcing wall plate
- NXWTU stainless adapter for oblique surfaces
Brackets and adapters listed for this housing in the Pelco specification sheet.
Related Products
- Pelco OHEPOWINJ Hi-PoE Power Injector
- Pelco IRH60L8A 60 Degree IR Illuminator
- Pelco IRH30L8A 30 Degree IR Illuminator
- Pelco OSUPPIR Illuminator Support
- Pelco WBOVA2 Wall Bracket with Cable Channel
- Pelco OHOVPOEIPM HOV IPM Retrofit Kit
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco HOV32K2A700
What does IPM mean on the HOV32K2A700?
Intelligent Power Management: the housing detects its heater, fan and illuminator options and shares the PoE or Hi-PoE power between them and the camera automatically.
How much power can the camera draw in the HOV32K2A700?
Up to PoE class 2 (7 W) when the housing is fed PoE class 3, or up to PoE class 3 (13 W) when fed Hi-PoE class 4.
What is the operating temperature of the HOV32K2A700?
-10 to +60 C (14 to 140 F), or -30 to +60 C (-22 to 140 F) with heater on Hi-PoE.
Can I add an IR illuminator?
Yes. The housing is pre-arranged to power one GEKO IRH low-power illuminator (6 W), mounted under the housing with the OSUPPIR support.
Is the HOV32K2A700 UL listed?
Yes, it is cULus Listed, Type 4X.
Detailed Specifications
Pelco HOV32K2A700 Specifications
| Specification | Details |
|---|---|
| General | |
| Model | HOV32K2A700 |
| Series | HOV Hi-PoE IPM aluminum housing |
| Configuration | PoE/Hi-PoE powered with IPM, demisting, illuminator or heater support |
| Mechanical | |
| Construction | Aluminum body, ABS sunshield |
| Finish | Epoxy-polyester powder coat, RAL 9002 |
| External screws | Stainless steel |
| Internal usable dimensions (W x H x L) | 100 x 70 x 250 mm (3.9 x 2.7 x 9.8 in) |
| Cable glands | 1 x M12, 1 x M16, 1 x M20 |
| Ethernet gland | Special gland for quick connect/disconnect without cutting the RJ45 connector |
| Window | Extra clear glass |
| Housing cross-section (W x H) | 118 x 75 mm (4.6 x 2.95 in) |
| Unit weight | 3.1 kg (6.6 lb) |
| Electrical | |
| Power input | PoE class 3 (13 W) or Hi-PoE class 4 (25 W), selected by DIP switch |
| Camera power (PoE class 3 input) | PoE class 2 (7 W) |
| Camera power (Hi-PoE class 4 input) | PoE class 3 (13 W), with cold start at -10 C |
| Data | 10/100Base-T |
| Standards | IEEE 802.3af, IEEE 802.3at |
| Demisting | Forced hot air, 5 W |
| Illuminator support | One GEKO IRH low-power illuminator, 6 W |
| Heater | 8 W, electronically controlled, on at 20 C, off at 23 C |
| Environmental | |
| Installation | Indoor and outdoor |
| Operating temperature | -10 to +60 C (14 to 140 F); -30 to +60 C (-22 to 140 F) with heater on Hi-PoE |
| Relative humidity | 5 to 95 percent |
| IP rating | IP66/IP67 |
| Impact rating | IK10 (except front glass) |
| Salt fog resistance | 1000 hours (ISO 9227) |
| Certifications | |
| Electrical safety | EN/IEC 60950-1, EN/IEC 62368-1, EN/IEC 60950-22 (outdoor) |
| EMC | EN50130-4, EN61000-6-3, EN55022 Class B, FCC Part 15 Class B |
| UL | cULus Listed, Type 4X |
| Shipping | |
| Shipping weight | 3.4 kg (7.5 lb) |
| Shipping dimensions | 19.5 x 14.5 x 53 cm (7.6 x 5.7 x 20.8 in) |
Related Products
Related Products
Pelco HOV32K2A716 HOV Hi-PoE IPM Housing with Blower
Brand: Pelco
Pelco HOV32K2A720 HOV Hi-PoE IPM Housing, Heater
Brand: Pelco
Pelco HPV42K2A700 VERSO Hi-PoE IPM Housing for IP Cameras
Brand: Pelco
Pelco OHOVPOEIPM Hi-PoE IPM Retrofit Kit for HOV Housings
Brand: Pelco
Pelco NXM36K2700 Hi-PoE Stainless Steel Housing for IP Cameras
Brand: Pelco