Pelco WCPA Reinforcing Wall Plate for WBJA, WBMA, WBOVA2 Brackets
Description
Pelco WCPA Reinforcing Wall Plate for WBJA, WBMA, WBOVA2 Brackets
The Pelco WCPA is a die-cast aluminum reinforcing support plate that lets WBJA, WBMA and WBOVA2 wall brackets be installed on walls with poor load-bearing consistency. It spreads the load over a wider footprint, carries up to 50 kg (110 lb) and allows internal cable management. It is also the base for the DBHWGC large-pole adapter.
Key Specifications
| Part number | WCPA |
| Type | Reinforcing wall adapter plate |
| Compatible with | WBJA, WBMA and WBOVA2 brackets; DBHWGC pole adapter |
| Material | Die-cast aluminum, epoxy-polyester powder painted |
| Load capacity | 50 kg (110 lb) |
| Cable routing | Internal cable management |
| Unit weight | 0.6 kg (1.3 lb) |
Full specifications are listed in the Detailed Specifications tab.
Installation
Anchor the WCPA to the wall with fixings suited to the wall material, then fasten the WBJA, WBMA or WBOVA2 bracket to the plate (four M8 threaded holes). Cables can pass through the plate to the bracket.
Compatible Products
- WBMA wall bracket
- WBJA wall bracket
- WBOVA2 wall bracket
- DBHWGC pole adapter
Related Products
- Pelco WBMA Wall Bracket with Ball Joint
- Pelco DBHWGC Pole Adapter 210-225 mm
- Pelco WCWA Corner Adapter
- Pelco WSFPA Pole Adapter 65-140 mm
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco WCPA
What is the Pelco WCPA used for?
It reinforces the mounting point for WBJA, WBMA and WBOVA2 brackets on weak or low-consistency walls.
What load does the WCPA support?
It is rated for 50 kg (110 lb).
Does the WCPA allow internal cabling?
Yes. It allows internal cable management to the bracket.
Is the WCPA needed with the DBHWGC?
Yes. The DBHWGC pole adapter is designed to be combined with the WCPA plate.
Detailed Specifications
Pelco WCPA Specifications
| Specification | Details |
|---|---|
| General | |
| Model | WCPA |
| Description | Reinforcing support plate for poor consistency walls |
| Type | Wall adapter plate |
| Mechanical | |
| Construction | Die-cast aluminum, epoxy-polyester powder painted |
| Load rating | 50 kg (110 lb) |
| Fixing | 4 x M8 threaded holes, 3/4 in GAS cable entry |
| Unit weight | 0.6 kg (1.3 lb) |
| Compatibility | |
| Brackets | WBJA, WBMA, WBOVA2 |
| Pole adapter | DBHWGC |
| Shipping | |
| Package weight | 0.7 kg (1.5 lb) |
| Package dimensions | 10 x 16 x 23 cm (4 x 6 x 9 in) |
Related Products
Related Products
Pelco WCWA Corner Mount Adapter for WBJA, WBMA, WBOVA2 Brackets
Brand: Pelco
Pelco WBMA Aluminum Wall Bracket with Ball Joint for Housings
Brand: Pelco
Pelco MVXIMA MLX Illuminator Adapter for MVXWB Wall Bracket
Brand: Pelco
Pelco MVXWB Stainless Wall Bracket for ExSite Enhanced 2 Fixed
Brand: Pelco
Pelco XWBA Stainless Steel Wall Bracket for ExSite Pro PTZ
Brand: Pelco