Pelco FMCI-BF1SM1ST Single-Mode Fiber Media Converter B, 1-Fiber ST
Description
Pelco FMCI-BF1SM1ST Single-Mode Fiber Media Converter B, 1-Fiber ST
The Pelco FMCI-BF1SM1ST is a standard-size 10/100 Mbps Ethernet fiber media converter that sends Ethernet over one single-mode fiber with an ST connector. It is the compatible receiver (B) unit of a matched pair: install it at one end of the fiber and the FMCI-AF1SM1ST at the other, and the two units carry full-duplex Fast Ethernet over one fiber using 1310/1550 nm wavelengths for runs up to 20 km (12 mi). The RJ-45 port autonegotiates 10 or 100 Mbps with automatic MDI/MDI-X, so IP cameras and network gear connect without adjustment. It runs on 8 to 24 VDC and can be surface mounted or slid into a USRACK card cage as a hot-swappable single-slot module.
Key Specifications
| Part number | FMCI-BF1SM1ST |
| Type | Standard size 10/100 Mbps Ethernet fiber media converter |
| Pair end | B end (compatible receiver); pairs with FMCI-AF1SM1ST |
| Fiber | 1 fiber, 9/125 um single-mode, ST connector |
| Wavelength | 1310/1550 nm |
| Distance | Up to 20 km (12 mi) (15 dB optical budget) |
| Electrical port | RJ-45, 10Base-T/100Base-TX, auto MDI/MDI-X |
| Power input | 8 to 24 VDC |
| Mounting | Surface or USRACK card cage (1 slot, hot-swappable); DIN rail with adapter plate |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
Full specifications are listed in the Detailed Specifications tab.
Installation
Install the A unit at one end of the fiber and the matching B unit at the other. Connect the ST fiber, connect the camera or switch to the RJ-45 port, and apply power to the terminal block or slide the module into a USRACK slot. LEDs show optical link and data, electrical link and data, and power.
Compatible Products
Pelco media converters must be installed as A and B pairs of the same fiber type.
Related Products
- Pelco FMCI-AF1SM1ST Single-Mode Media Converter A
- Pelco FMCI-AF1SM1STM Mini Single-Mode Media Converter A
- Pelco USRACK 14-Slot Fiber Module Card Cage
- Pelco FMCI-PF2 Dual-Channel 10/100 Mbps Media Converter
Explore More
- Shop Converters at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco FMCI-BF1SM1ST
What does the FMCI-BF1SM1ST pair with?
It is the b end (compatible receiver) and must be paired with the FMCI-AF1SM1ST at the other end of the fiber. A and B units use opposite wavelengths on the same fiber.
What fiber and connector does it use?
One 9/125 um single-mode fiber with an ST connector. Maximum distance is 20 km (12 mi) with a 15 dB optical power budget.
What data rates does it support?
The RJ-45 port autonegotiates 10 or 100 Mbps, full or half duplex. The optical link runs at 100 Mbps full duplex.
How is it powered?
It accepts 8 to 24 VDC through a terminal block, or takes power from the USRACK card cage when rack mounted. A power supply is not included.
Can it be rack mounted?
Yes. It occupies one slot in the Pelco USRACK card cage and is hot-swappable, or it can be surface mounted or DIN rail mounted with an adapter plate.
Is it rated for harsh environments?
Yes. It operates from -40 to 75 C and is designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal equipment environmental standards.
Detailed Specifications
Pelco FMCI-BF1SM1ST Specifications
| Specification | Details |
|---|---|
| General | |
| Model | FMCI-BF1SM1ST |
| Description | Standard size Ethernet media converter, single-mode, 1 fiber, ST |
| Pair | B end (compatible receiver); compatible pair FMCI-AF1SM1ST |
| Data channels | 1 Ethernet, 10/100 Mbps |
| MTBF | Greater than 100,000 hours |
| Optical | |
| Fiber type | 9/125 um single-mode |
| Number of fibers | 1 |
| Connector | ST |
| Wavelength | 1310/1550 nm |
| Optical power budget | 15 dB |
| Maximum distance | 20 km (12 mi) |
| Optical port | 100 Mbps, full duplex |
| Electrical | |
| Electrical port | RJ-45, 10Base-T/100Base-TX, autonegotiating, full or half duplex |
| MDI/MDI-X | Automatic |
| Data encoding | Transparent |
| Power input | 8 to 24 VDC |
| Power connector | Terminal block |
| Protection | Resettable solid-state current limiter; voltage transient protection on all power and signal lines |
| LED indicators | Optical link and data, electrical link and data, power |
| Mechanical | |
| Size | Standard size |
| Rack slots | 1 (USRACK card cage) |
| Mounting | Surface or USRACK card cage (1 slot, hot-swappable); DIN rail with adapter plate |
| Dimensions | 6.1 D x 5.3 W x 1.1 H in (15.5 x 13.5 x 2.8 cm) |
| Unit weight | 1.00 lb (0.45 kg) |
| Environmental | |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
| Storage temperature | -40 to 85 C (-40 to 185 F) |
| Relative humidity | 0 to 95 percent, noncondensing |
| Certifications | |
| Approvals | CE Class A, FCC Class A, UL/cUL Listed, C-Tick, RoHS, IEEE 802.3 |
| Standards | Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards |
| Shipping | |
| Shipping weight | 2.00 lb (0.90 kg) |
Related Products
Related Products
Pelco FMCI-AF1SM1ST Single-Mode Fiber Media Converter A, 1-Fiber ST
Brand: Pelco
Pelco FMCI-AF1SM1STM Mini Single-Mode Fiber Media Converter A, ST
Brand: Pelco
Pelco FMCI-BF1MM1ST Multimode Fiber Media Converter B, 1-Fiber ST
Brand: Pelco
Pelco FMCI-AF1MM1ST Multimode Fiber Media Converter A, 1-Fiber ST
Brand: Pelco
Pelco FMCI-BF1MM1STM Mini Multimode Fiber Media Converter B, ST
Brand: Pelco