Pelco FMCI-AF1MM1STM Mini Multimode Fiber Media Converter A, ST
Description
Pelco FMCI-AF1MM1STM Mini Multimode Fiber Media Converter A, ST
The Pelco FMCI-AF1MM1STM is a mini 10/100 Mbps Ethernet fiber media converter that sends Ethernet over one multimode fiber with an ST connector. It is the transmitter (A) unit of a matched pair: install it at one end of the fiber and the FMCI-BF1MM1STM at the other, and the two units carry full-duplex Fast Ethernet over one fiber using 1310/1550 nm wavelengths for runs up to 3 km (2 mi). The RJ-45 port autonegotiates 10 or 100 Mbps with automatic MDI/MDI-X, so IP cameras and network gear connect without adjustment. The mini housing accepts 22 to 27 VAC or 8 to 24 VDC and surface mounts where space is tight.
Key Specifications
| Part number | FMCI-AF1MM1STM |
| Type | Mini 10/100 Mbps Ethernet fiber media converter |
| Pair end | A end (transmitter); pairs with FMCI-BF1MM1STM |
| Fiber | 1 fiber, 62.5/125 um multimode, ST connector |
| Wavelength | 1310/1550 nm |
| Distance | Up to 3 km (2 mi) (10 dB optical budget) |
| Electrical port | RJ-45, 10Base-T/100Base-TX, auto MDI/MDI-X |
| Power input | 22 to 27 VAC or 8 to 24 VDC |
| Mounting | Surface mount only; DIN rail with adapter plate |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
| Compliance | NDAA compliant |
Full specifications are listed in the Detailed Specifications tab.
Installation
Install the A unit at one end of the fiber and the matching B unit at the other. Connect the ST fiber, connect the camera or switch to the RJ-45 port, and apply power to the terminal block. LEDs show optical link and data, electrical link and data, and power.
Compatible Products
Pelco media converters must be installed as A and B pairs of the same fiber type.
Related Products
- Pelco FMCI-BF1MM1STM Multimode Media Converter B
- Pelco FMCI-AF1MM1ST Multimode Media Converter A
- Pelco FMCI-BF1MM1ST Multimode Media Converter B
- Pelco FMCI-PF2 Dual-Channel 10/100 Mbps Media Converter
Explore More
- Shop Converters at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco FMCI-AF1MM1STM
What does the FMCI-AF1MM1STM pair with?
It is the a end (transmitter) and must be paired with the FMCI-BF1MM1STM at the other end of the fiber. A and B units use opposite wavelengths on the same fiber.
What fiber and connector does it use?
One 62.5/125 um multimode fiber with an ST connector. Maximum distance is 3 km (2 mi) with a 10 dB optical power budget.
What data rates does it support?
The RJ-45 port autonegotiates 10 or 100 Mbps, full or half duplex. The optical link runs at 100 Mbps full duplex.
How is it powered?
It accepts 22 to 27 VAC or 8 to 24 VDC through a terminal block. A power supply is not included.
Can it be rack mounted?
No. The mini unit is surface mount only, or DIN rail mounted with an adapter plate.
Is it rated for harsh environments?
Yes. It operates from -40 to 75 C and is designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal equipment environmental standards.
Detailed Specifications
Pelco FMCI-AF1MM1STM Specifications
| Specification | Details |
|---|---|
| General | |
| Model | FMCI-AF1MM1STM |
| Description | Mini Ethernet media converter, multimode, 1 fiber, ST |
| Pair | A end (transmitter); compatible pair FMCI-BF1MM1STM |
| Data channels | 1 Ethernet, 10/100 Mbps |
| MTBF | Greater than 100,000 hours |
| Optical | |
| Fiber type | 62.5/125 um multimode |
| Number of fibers | 1 |
| Connector | ST |
| Wavelength | 1310/1550 nm |
| Optical power budget | 10 dB |
| Maximum distance | 3 km (2 mi) |
| Optical port | 100 Mbps, full duplex |
| Electrical | |
| Electrical port | RJ-45, 10Base-T/100Base-TX, autonegotiating, full or half duplex |
| MDI/MDI-X | Automatic |
| Data encoding | Transparent |
| Power input | 22 to 27 VAC or 8 to 24 VDC |
| Power connector | Terminal block |
| Protection | Resettable solid-state current limiter; voltage transient protection on all power and signal lines |
| LED indicators | Optical link and data, electrical link and data, power |
| Mechanical | |
| Size | Mini |
| Rack slots | Not rack mountable |
| Mounting | Surface mount only; DIN rail with adapter plate |
| Dimensions | 3.3 D x 2.5 W x 1.1 H in (8.4 x 6.4 x 2.8 cm) |
| Unit weight | 1.00 lb (0.45 kg) |
| Environmental | |
| Operating temperature | -40 to 75 C (-40 to 167 F) |
| Storage temperature | -40 to 85 C (-40 to 185 F) |
| Relative humidity | 0 to 95 percent, noncondensing |
| Certifications | |
| Approvals | CE Class A, FCC Class A, UL/cUL Listed, C-Tick, RoHS, IEEE 802.3 |
| Standards | Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards |
| NDAA | NDAA compliant |
| Shipping | |
| Shipping weight | 2.00 lb (0.90 kg) |
Related Products
Related Products
Pelco FMCI-BF1MM1STM Mini Multimode Fiber Media Converter B, ST
Brand: Pelco
Pelco FMCI-AF1MM1ST Multimode Fiber Media Converter A, 1-Fiber ST
Brand: Pelco
Pelco FMCI-BF1MM1ST Multimode Fiber Media Converter B, 1-Fiber ST
Brand: Pelco
Pelco FMCI-AF1SM1STM Mini Single-Mode Fiber Media Converter A, ST
Brand: Pelco
Pelco FMCI-AF1SM1ST Single-Mode Fiber Media Converter A, 1-Fiber ST
Brand: Pelco