Pelco ExSite EXRE2-VF09-E0AB0-1 VGA Radiometric Ex-Proof Thermal

Pelco ExSite EXRE2-VF09-E0AB0-1 VGA Radiometric Explosion-Proof Thermal Camera

The Pelco ExSite EXRE2-VF09-E0AB0-1 is an explosion-proof VGA (640 x 512) radiometric thermal camera with a 9.2 mm lens (50.0° field of view) in an AISI 316L stainless steel housing. It reports real-time temperature data with above, below, match and change events to catch overheating equipment early, with a 9 Hz frame rate for export compliance, and runs on PoE at 10 W, for oil and gas, chemical and hazardous areas.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Why Choose the Pelco ExSite EXRE2-VF09-E0AB0-1?

• 640 x 512 VOx thermal, NETD <50 mK
• 9.2 mm lens, 50.0° x 40.0° field of view
• Classified object detection to 120 m (394 ft)
• Radiometric temperature events
• cETLus listed for Class I Zone 1 IIC and Class I/II Division 2
• Rated -50°C to +65°C, IP66 to IP69
• PoE (802.3af), 12 VDC or 24 VAC at 10 W
• Onboard FIPS 140-3 Level 3 TPM

Thermal Detection

The 640 x 512 uncooled VOx microbolometer (12 µm, 8-14 µm) with a 9.2 mm lens covers 50.0° x 40.0° at 8.6 fps (9 hz export version), with Pelco Smart Analytics events for objects in area, object loitering, objects crossing beam, object appears or enters area, object not present, objects enter or leave area, object stops in area, direction violated and tamper detection. Classified objects are detected to 120 m (394 ft).

Radiometric Temperature Monitoring

Events trigger when a region's temperature is above, below or matches a set value, or changes by a set amount over time, across -40°C to 225°C, with burnt-in radiometry overlays.

Certified for Hazardous Locations

The camera is cETLus listed (5002689) for Class I Zone 1 AEx db IIC, Zone 21 AEx tb IIIC, Class I Division 2 Groups A-D and Class II Division 2 Groups F and G. ATEX, IECEx, UKEx, INMETRO, KCs and TS mark also apply.

Installation

One 3/4-inch NPT cable entry, PoE (802.3af Class 3), 12 VDC or 24 VAC at 10 W, SD card storage, audio and alarm I/O; AISI 316L housing and sunshield, about 6.6 kg.

Typical Applications

• Oil and gas wells, refineries and LNG terminals
• Chemical and petrochemical plants
• Offshore platforms, ships and ports
• Pharmaceutical, grain and food processing with combustible dust
• Fuel depots, pipelines and pumping stations

Compatible Accessories

Accessories Pelco lists for the Pelco ExSite EXRE2-VF09-E0AB0-1. Linked items are available at Affinitech Store; contact us for the others:

• Pelco NXWBS1 Wall Bracket with NXWTU Adapter
• Pelco MHXWFWCA Parapet Bracket
• Pelco NXCOL Pole Adapter
• Pelco NXCW Corner Adapter
• Pelco EXTE2-CABLARM41 4 m Armored Cable

Compare Pelco ExSite Thermal Cameras

Explore More

• Browse all Explosion-Protected Cameras at Affinitech Store
• Shop Thermal Cameras at Affinitech Store
• Shop Outdoor Cameras at Affinitech Store
• Shop AI Cameras at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco ExSite EXRE2-VF09-E0AB0-1

What is the Pelco ExSite EXRE2-VF09-E0AB0-1?

An explosion-proof VGA radiometric thermal camera with a 9.2 mm lens in an AISI 316L stainless steel housing.

What is the field of view?

50.0° x 40.0°.

What is the frame rate?

8.6 fps; -1 models are 9 Hz export versions.

Is it radiometric?

Yes, with temperature above, below, match and change events.

Where can it be installed?

It is cETLus listed for Class I, Zone 1 (AEx db IIC), Zone 21 (AEx tb IIIC), Class I Division 2 Groups A-D and Class II Division 2 Groups F and G.

How is it powered?

PoE (IEEE 802.3af Class 3), 12 VDC or 24 VAC; 10 W.

What is the operating temperature?

-50°C to +65°C.

What warranty does it have?

A 3-year limited warranty, with a 5-year extended warranty available.