Pelco ExSite EXTE2-VF36-E0AB0 VGA Explosion-Proof Thermal Camera
Description
Pelco ExSite Enhanced Thermal 2 Series EXTE2-VF36-E0AB0 VGA Explosion-Proof Thermal Camera
The Pelco ExSite EXTE2-VF36-E0AB0 is an explosion-proof VGA (640 x 512) thermal camera with a 36.0 mm lens (12.0° field of view) in an AISI 316L stainless steel housing. It detects people and vehicles by heat signature up to 310 m away in darkness, fog, smoke and foliage, and runs on PoE with an onboard FIPS 140-3 Level 3 TPM, for oil and gas, chemical and hazardous areas.
Key Specifications
| Thermal resolution | 640 x 512 (VGA) |
| Detector | Uncooled VOx microbolometer, 12 µm |
| Thermal sensitivity (NETD) | ≤50 mK (≤40 mK with Frame Averager) |
| Lens | 36.0 mm |
| Field of view | 12.0° x 9.6° |
| Classified object detection range | 310 m (1,017 ft) |
| Frame rate | Up to 30 fps |
| Radiometric | No (use the EXRE2 radiometric model) |
| Hazardous location (US) | cETLus Class I, Zone 1 AEx db IIC; Class I, Div 2, Groups A-D; Class II, Div 2, Groups F, G; T6...T5 |
| Cybersecurity | Onboard FIPS 140-3 Level 3 certified TPM |
| Power | PoE (802.3af Class 3), 12 VDC or 24 VAC (10 W) |
| IP rating | IP66, IP67, IP68, IP69; Type 4X and 6P |
| Operating temperature | -50°C to +65°C (-58°F to 149°F) |
Full specifications are listed in the Detailed Specifications tab.
Why Choose the Pelco ExSite EXTE2-VF36-E0AB0?
- 640 x 512 VOx thermal, NETD ≤50 mK
- 36.0 mm lens with a 12.0° x 9.6° field of view
- Classified object detection to 310 m (1,017 ft)
- Long-range heat detection for fences and access points
- cETLus listed for Class I Zone 1 IIC and Class I/II Division 2
- Onboard FIPS 140-3 Level 3 TPM and secure boot
- Rated -50°C to +65°C, IP66 to IP69, Type 4X and 6P
- Runs on PoE (802.3af Class 3) at 10 W
Thermal Detection
The 640 x 512 uncooled VOx microbolometer (12 µm, 8 to 14 µm) with a 36.0 mm lens covers 12.0° x 9.6° at up to 30 fps, with NETD ≤50 mK and ten palettes. Smart Analytics classify objects up to 310 m (1,017 ft) and raise events for objects in area, object loitering, objects crossing beam, object appears or enters area, object not present, objects enter or leave area, object stops in area, direction violated and tamper detection.
Long-Range Perimeter Coverage
The 36 mm lens narrows the view to 12.0° for fences, access points and long approaches, detecting classified objects at up to 310 m (1,017 ft), even in fog, smoke or dense foliage.
Certified for Hazardous Locations
The camera is cETLus listed (5002689) for Class I Zone 1 AEx db IIC T6...T5 Gb, Zone 21 AEx tb IIIC T85°C...T100°C Db, Class I Division 2 Groups A, B, C, D and Class II Division 2 Groups F and G, from -60°C to +55°C (T6) or +65°C (T5). ATEX, IECEx, UKEx, INMETRO, KCs and TS mark also apply.
Installation and Security
One 3/4-inch NPT cable entry, PoE (802.3af Class 3), 12 VDC or 24 VAC power at 10 W, SD card storage, audio and alarm I/O. Security includes an onboard FIPS 140-3 L3 certified TPM, FIPS 140-2 L1, secure boot and signed, encrypted firmware.
Typical Applications
- Oil and gas wells, refineries and LNG terminals
- Chemical and petrochemical plants
- Offshore platforms, ships and ports
- Pharmaceutical, grain and food processing with combustible dust
- Fuel depots, pipelines and pumping stations
Compatible Accessories
Accessories Pelco lists for the Pelco ExSite EXTE2-VF36-E0AB0. Linked items are available at Affinitech Store; contact us for the others:
- Pelco NXWBS1 Wall Bracket with NXWTU Wall Adapter
- Pelco MHXWFWCA Parapet Bracket
- Pelco NXCOL Pole Mount Adapter
- Pelco NXCW Corner Mount Adapter
- Pelco EXTE2-CABLARM41 4 m Armored Cable with Barrier Gland
Compare Pelco ExSite Explosion-Proof Fixed and Thermal Cameras
| Model | Max resolution | Type | Best for |
|---|---|---|---|
| Pelco ExSite Enhanced 2 EXF2230-62-C4 | 1945 x 1097 (2MP) | Fixed 30x zoom camera with wiper, T6, 4 m cable tail | Long-range fixed views of process areas |
| Pelco ExSite Enhanced 2 EXC2602-62 | 3200 x 1800 (6MP) | Compact fixed camera, 4.9-8 mm, PoE+ | Close-range views of tight hazardous areas |
| Pelco ExSite EXTE2-VF36-E0AB0 (this camera) | 640 x 512 thermal | Thermal camera, 36 mm lens, 12° HFOV | Long-range perimeter and fence detection |
| Pelco ExSite EXRE2-VF09-E0AB0 | 640 x 512 thermal | Radiometric thermal camera, 9.2 mm lens, 50° HFOV | Temperature monitoring of equipment |
Need temperature measurement? See the Pelco ExSite EXRE2-VF09-E0AB0.
Explore More
- Browse all Explosion Protected Cameras at Affinitech Store
- Shop Thermal Cameras at Affinitech Store
- Shop Outdoor Cameras at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco ExSite EXTE2-VF36-E0AB0
What is the Pelco ExSite EXTE2-VF36-E0AB0?
An explosion-proof VGA (640 x 512) thermal camera with a 36.0 mm lens in an AISI 316L stainless steel housing.
Is it radiometric?
No. For temperature measurement, see the radiometric EXRE2-VF09-E0AB0 with a 9.2 mm lens.
How far can it detect objects?
Classified object detection up to 310 m (1,017 ft); ranges vary with weather conditions.
What is the field of view?
12.0° horizontal by 9.6° vertical with the 36.0 mm lens.
Where can it be installed?
It is cETLus listed for Class I, Zone 1 (AEx db IIC), Zone 21 (AEx tb IIIC), Class I Division 2 Groups A to D and Class II Division 2 Groups F and G.
How is it powered?
PoE (IEEE 802.3af Class 3), 12 VDC or 24 VAC; 10 W.
Is it FIPS compliant?
It has an onboard FIPS 140-3 Level 3 certified TPM and supports FIPS 140-2 Level 1.
What is the operating temperature?
-50°C to +65°C (-58°F to 149°F).
What warranty does it have?
A 3-year limited warranty, with a 5-year extended warranty available.
Detailed Specifications
Pelco ExSite EXTE2-VF36-E0AB0 Specifications
| Specification | Details |
|---|---|
| Model | |
| Model | EXTE2-VF36-E0AB0: ExSite Enhanced Thermal 2 Series Fixed, VGA 640 x 512, 36.0 mm lens, 30 fps |
| Image Performance | |
| Image sensor | 640 x 512 uncooled VOx microbolometer |
| Pixel pitch | 12 µm |
| Spectral range | 8 µm to 14 µm |
| Aspect ratio | 5:4 |
| Imaging rate | Up to 30 fps |
| Dynamic range | -40°C to 225°C (-40°F to 437°F) |
| Resolution scaling | 640 x 512, down to 320 x 256 |
| 3D noise reduction | Yes |
| Sensitivity | NETD ≤50 mK (≤40 mK on 30 fps models with Frame Averager) |
| Thermal palettes | White Hot, Black Hot, Rainbow, RainHC, IronBow, Lava, Artic, GlowBow, GradedFire, Hottest |
| Uniformity | Automatic flat field correction (thermal and temporal) |
| Lens | |
| Focal length | 36.0 mm |
| Angle of view (H x V) | 12.0° x 9.6° |
| Classified object detection range | 310 m (1,017 ft) |
| Image Control | |
| Compression | H.264, H.265, Motion JPEG, Pelco Smart Compression |
| Bandwidth management | Smart Compression; idle scene mode |
| Motion detection | Pixel and classified objects |
| Tamper detection | Yes |
| Privacy zones | Up to 64 |
| Audio compression | Opus, G.711 PCM 8 kHz |
| Electronic image stabilization | Yes |
| Network | |
| Network | 100BASE-TX, RJ-45, Cat5 |
| ONVIF | Profile S, T, G and M |
| Security | Password protection, HTTPS, digest authentication, WS authentication, user access log, 802.1x, FIPS 140-2 L1, onboard FIPS 140-3 L3 certified TPM, secure boot, signed and encrypted firmware |
| Protocols | IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv3, ICMP, DHCP, Zeroconf, QoS, DSCP |
| Streaming protocols | RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP, SRTP |
| Device management | SNMP v2c, SNMP v3 |
| Mechanical | |
| Dimensions | Ø155.5 x 269.0 mm (Ø6.12 x 10.4 in) without sunshield |
| Weight | 6.6 kg (14.5 lb) |
| Construction | AISI 316L stainless steel, electro-polished |
| Cable entry | One 3/4-inch NPT |
| Sunshield | AISI 316L stainless steel |
| Electrical | |
| Power consumption | 10 W |
| Power source | 12 VDC ±10% (9 W min), 24 VAC ±10% (15 VA min), PoE IEEE 802.3af Class 3 |
| Audio | Line level input/output |
| External I/O | Alarm in, alarm out |
| Local storage | SD card (Class V10 or better recommended) |
| Environmental | |
| Operating temperature | -50°C to +65°C (-58°F to 149°F) |
| Storage temperature | -40°C to +70°C (-40°F to 158°F) |
| Humidity | 10% to 95% non-condensing |
| Certifications | |
| Directives | cULus, CE, UKCA, RoHS, RCM, KC |
| Safety | UL/CSA 62368-1, EN/IEC 62368-1 |
| cETLus 5002689, USA | Class I Zone 1 AEx db IIC T6...T5 Gb; Zone 21 AEx tb IIIC T85°C...T100°C Db; Class I Div 2 Groups A, B, C, D T6...T5; Class II Div 2 Groups F, G T6...T5; -60°C ≤ Ta ≤ +55°C or +65°C |
| cETLus 5002689, Canada | Ex db IIC T6...T5 Gb; Ex tb IIIC T85°C...T100°C Db; Class I Div 2 Groups A-D; Class II Div 2 Groups F, G |
| ATEX / IECEx | ITS 15ATEX18330X and IECEx ITS15.0030X: Ex db IIC T6...T5 Gb; Ex tb IIIC T85°C...T100°C Db |
| Other hazardous | UKEx ITS21UKEX0379X, INMETRO UL-BR 16.0004X, KCs, TS mark |
| Environmental | IP66, IP67, IP68, IP69; IEC 60068-2-1, -2-2, -2-6, -2-30, -2-52; UL50E 4X, 6P; MIL-STD-167-1A |
| Marine | Lloyd's Register Marine Type Approval; EN60945 |
| Warranty | 3-year limited warranty; 5-year extended warranty available |
| Analytics | |
| Video analytic events | Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Enter Area, Objects Leave Area, Object Stops in Area, Direction Violated, Tamper Detection |
| Pelco Elevate | Image health and firmware management |
| Accessories | |
| Mounting | NXWBS1 wall bracket with NXWTU adapter; MHXWFWCA parapet bracket; NXFWBT vertical riser; NXCOL pole adapter; NXCW corner adapter |
| Cabling | EXTE2-CABLARM41 / EXTE2-CABLARM101 armored cable with barrier gland (4 m / 10 m) |
Related Products
Related Products
Pelco ExSite EXTE2-VF36-E0AB0-1 VGA Explosion-Proof Thermal
Brand: Pelco
Pelco ExSite EXRE2-VF09-E0AB0 Radiometric Explosion-Proof Thermal
Brand: Pelco
Pelco ExSite EXTE2-QF06-E0A00 QVGA Explosion-Proof Thermal
Brand: Pelco
Pelco ExSite EXTE2-QF18-E0A00 QVGA Explosion-Proof Thermal
Brand: Pelco
Pelco ExSite EXTE2-QF06-E0A00-1 QVGA Explosion-Proof Thermal
Brand: Pelco