AXIS T91D62 Telescopic Parapet Mount 1.5-inch NPS, 5507-271

AXIS T91D62 Telescopic Parapet Mount

The AXIS T91D62 is a telescopic parapet mount whose arm extends from 783 mm (30.1 in) to 1033 mm (40.7 in), so the camera clears thick parapets and facade features. It carries AXIS fixed dome and PTZ cameras on a 1.5-inch NPS pendant kit, and it can swivel 180° on its own axis so the camera can be serviced safely from the roof. It also works as an extended wall mount, and an internal fish tape with RJ45 grips helps pull the network cable through the arm.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation Notes

• Adjust the arm length to clear the parapet or any obstruction on the facade.
• Swivel the arm inward to install or service the camera from the rooftop, then swing it back out.
• Pull the Ethernet cable through the arm with the internal fish tape and RJ45 connector grip; a pull-string is included.
• To reuse holes from a Pelco PTZ dome parapet mount, add the AXIS T91D62 Adapter Mount Bracket.

Compatible Products

Compatible AXIS pendant kits available at Affinitech Store:

• AXIS T94A01D Pendant Kit (PTZ cameras)
• AXIS T94F01D Pendant Kit
• AXIS T94K01D Pendant Kit
• AXIS T94M01D Pendant Kit
• AXIS T94T02D Pendant Kit
• AXIS T94B02D Pendant Kit
• AXIS T94N01D Pendant Kit
• AXIS T94N02D Pendant Kit
• AXIS T91A05 Camera Holder 1.5-inch NPS
• AXIS T94V01C Dual Camera Mount
• AXIS TM4101 Pendant Kit
• AXIS TP3103-E Pendant Kit
• AXIS TP3105-E Pendant Kit Black
• AXIS TP3106-E Pendant Kit Black
• AXIS TQ3103-E Pendant Kit

The datasheet lists the AXIS M30, P32, P33, P56, Q35, Q37, Q60 and Q61 series, each with its matching pendant kit (AXIS T94A01D for P56, Q37, Q60 and Q61 PTZ cameras).

Related Products

Related AXIS accessories, available at Affinitech Store:

• AXIS T91D62 Adapter Mount Bracket
• AXIS T91B52 Extension Pipe 100 cm
• AXIS TP3908-E Extension Pipe 30 cm White
• AXIS Bird Control Spike (10-pack)
• AXIS ACI Conduit Adapter 3/4-inch NPS (2-pack)
• AXIS T94N01G Pole Mount

Explore More

• Browse all Housings & Mounts at Affinitech Store
• See every Network Camera Accessory we carry
• Shop more AXIS products at Affinitech Store

Frequently Asked Questions About AXIS T91D62

How far does the AXIS T91D62 arm extend?

The telescopic arm adjusts from 783 mm (30.1 in) to 1033 mm (40.7 in).

Can it be used on a wall instead of a parapet?

Yes. Axis lists parapet and wall mounting, for when the camera needs to sit further out than a standard wall mount allows.

How do I service the camera from the roof?

The mount swivels 180° on its own axis, so the camera can be turned inward for installation and maintenance.

Which cameras can it hold?

AXIS M30, P32, P33, P56, Q35, Q37, Q60 and Q61 series cameras with the matching pendant kit, up to 15 kg (33 lb).

How is the cable run through the arm?

An internal fish tape with an RJ45 connector grip at each end pulls the Ethernet cable through the pipe. Side M25 (3/4-inch) conduit holes are also available.

Can I reuse holes from an old parapet mount?

Yes, with the optional AXIS T91D62 Adapter Mount Bracket, which matches holes drilled for a Pelco PTZ dome parapet mount.