AXIS T91B50 Telescopic Ceiling Mount 1-2 m, 5507-451
Description
AXIS T91B50 Telescopic Ceiling Mount
The AXIS T91B50 is a telescopic ceiling mount that lowers an AXIS camera 1-2 m (39-79 in) below the ceiling, so it can see past lighting, ducts and pipes. It takes AXIS pendant kits with a 1.5-inch NPS thread and the AXIS T91A05 Camera Holder for fixed cameras. A swivel joint with a ±45° pivot lets the mount swing aside if a tall vehicle or forklift hits it, and it stays vertical on sloped ceilings. It is IK10 and NEMA 4X rated for indoor and outdoor use.
Key Specifications
| Part number | 5507-451 |
| Type | Telescopic ceiling mount with swivel |
| Compatible with | AXIS pendant kits with 1.5-inch NPS thread, AXIS T91A05 Camera Holder |
| Material | Powder-coated aluminum |
| Length | Minimum 1151 mm (45 in), maximum 2136 mm (84 in) |
| Weight | 4.1 kg (9 lb) |
| Maximum load | 10 kg (22 lb) |
| Pivot angle | ±45° |
| Ratings | IK10, NEMA 4X (corrosion protection) |
| Warranty | 3-year Axis warranty |
Full specifications are listed in the Detailed Specifications tab.
Installation Notes
- Set the telescopic pipe to the length you need; the cable runs inside the pipe.
- Bring cables in through the 3/4-inch conduit hole on the side or the back.
- For a sturdier install, the mount can also be secured to the ceiling with wires.
- Need more drop? AXIS T91B52 extension pipes (30 cm and 100 cm) extend the total length, up to 5 m (197 in) according to Axis.
Compatible Products
Compatible AXIS pendant kits and holders available at Affinitech Store:
- AXIS T91A05 Camera Holder 1.5-inch NPS
- AXIS T94A01D Pendant Kit (PTZ cameras)
- AXIS T94B02D Pendant Kit
- AXIS T94F01D Pendant Kit
- AXIS T94K01D Pendant Kit
- AXIS T94M01D Pendant Kit
- AXIS T94N01D Pendant Kit
- AXIS T94N02D Pendant Kit
- AXIS T94T02D Pendant Kit
- AXIS T94V01C Dual Camera Mount
- AXIS TM4101 Pendant Kit
- AXIS TP3103-E Pendant Kit
- AXIS TP3105-E Pendant Kit Black
- AXIS TP3106-E Pendant Kit Black
- AXIS TM5806-E Housing
The datasheet lists the AXIS P55, P56, Q60 and Q61 PTZ series (with the AXIS T94A01D Pendant Kit), AXIS M50 (with the AXIS T91A05), P32, P33, Q35, M30 and P3707-PE (each with its pendant kit), and Axis fixed cameras with the AXIS T91A05 Camera Holder.
Related Products
Related AXIS accessories, available at Affinitech Store:
- AXIS T91B52 Extension Pipe 100 cm
- AXIS TP3908-E Extension Pipe 30 cm White
- AXIS T91B51 Ceiling Mount
- AXIS T91B53 Indoor Telescopic Ceiling Mount (2-pack)
- AXIS T91B63 Ceiling Mount
- AXIS Safety Wire 3 m (5-pack)
Explore More
- Browse all Housings & Mounts at Affinitech Store
- See every Network Camera Accessory we carry
- Shop more AXIS products at Affinitech Store
Frequently Asked Questions About AXIS T91B50
How far does the AXIS T91B50 extend?
The telescopic pipe adjusts between 1 m (39 in) and 2 m (79 in). The datasheet gives an overall length of 1151 mm (45 in) to 2136 mm (84 in).
How much weight can it hold?
Up to 10 kg (22 lb).
What happens if a vehicle hits it?
The mount has a swivel joint with a pivot angle of ±45°, so it swings out of the way instead of breaking.
Which cameras can I hang from it?
Any AXIS camera that uses a pendant kit with a 1.5-inch NPS thread, such as AXIS P55, P56, Q60 and Q61 PTZ cameras with the AXIS T94A01D, or fixed cameras with the AXIS T91A05 Camera Holder.
Can it be used outdoors?
Yes. It is rated for indoor and outdoor use, IK10 for impact and NEMA 4X for corrosion and salt spray.
Can I make it longer?
Yes. Optional AXIS T91B52 extension pipes in 30 cm (12 in) and 100 cm (39 in) lengths are available.
Detailed Specifications
AXIS T91B50 Specifications
| Specification | Details |
|---|---|
| General | |
| Supported products | AXIS P55/P56/Q60/Q61 Series (requires AXIS T94A01D Pendant Kit); AXIS M50 Series (requires AXIS T91A05 Camera Holder 1.5-inch NPS); AXIS P33 Series (requires AXIS P33 Pendant Kit); AXIS P32/Q35 Series (requires AXIS T94K01D/T94M01D Pendant Kit); AXIS M3004-V/M3005-V (requires AXIS T94B01D Pendant Kit); AXIS M3006-V/M3007-P/M3007-PV (requires AXIS T94F01D Pendant Kit); AXIS M3024-LVE/M3025-VE/M3026-VE/M3027-PVE/M3037-PVE (requires AXIS T94F02D Pendant Kit); AXIS P3707-PE (requires AXIS T94M02D Pendant Kit); AXIS Q3709-PVE (requires AXIS T94A01D Pendant Kit); Axis fixed cameras (requires AXIS T91A05 Camera Holder 1.5-inch NPS) |
| Environment | Indoor and outdoor |
| Maximum load | 10 kg (22 lb) |
| Pivot angle | ±45° |
| Cable routing | Side: cable conduit hole 3/4-inch; Back: cable conduit hole 3/4-inch |
| Casing | |
| Casing | Powder-coated aluminum, NEMA 4X-rated (corrosion protection), IK10 impact-resistant |
| Approvals | |
| Standards | IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581, IEC/EN 62262 IK10, NEMA 250 Type 4X (corrosion protection) |
| Dimensions and Weight | |
| Minimum length | 1151 mm (45 in) |
| Maximum length | 2136 mm (84 in) |
| Weight | 4.1 kg (9 lb) |
| Box Content | |
| Included accessories | Installation guide |
| Optional Accessories | |
| Accessories | AXIS T91B52 Extension Pipe 30 cm (12 in), AXIS T91B52 Extension Pipe 100 cm (40 in) |
| Warranty | |
| Warranty | 3-year warranty |