2N

2N IP Verso Surface Frame for 1 Module The 2N IP Verso Surface Frame for 1 Module (01287-001) mounts one module of the 2N IP Verso range directly on the wall surface, with no recess to cut, in a...

2N IP Verso Surface Frame for 2 Modules The 2N IP Verso Surface Frame for 2 Modules (01290-001) mounts two modules of the 2N IP Verso range directly on the wall surface, with no recess to cut, in a...

2N IP Verso Surface Frame for 2 Modules The 2N IP Verso Surface Frame for 2 Modules (01289-001) mounts two modules of the 2N IP Verso range directly on the wall surface, with no recess to cut, in a...

2N IP Verso Surface Frame for 3 Modules The 2N IP Verso Surface Frame for 3 Modules (01292-001) mounts three modules of the 2N IP Verso range directly on the wall surface, with no recess to cut, in a...

2N IP Verso Surface Frame for 3 Modules The 2N IP Verso Surface Frame for 3 Modules (01291-001) mounts three modules of the 2N IP Verso range directly on the wall surface, with no recess to cut, in a...

2N IP Verso Tamper Switch Module The 2N IP Verso Tamper Switch Module adds tamper detection to a 2N IP Verso family intercom, raising an alarm if someone opens the unit without authorisation. It...

2N IP Verso Touch Display Module The 2N IP Verso Touch Display Module gives a 2N IP Verso family intercom a 4-inch LCD with a searchable phone book and a touch keypad for access codes. Visitors...

2N IP Verso Touch Keypad Module The 2N IP Verso Touch Keypad Module lets people open the door by typing a PIN on a capacitive touch surface. PIN codes can be shared by a group or issued individually,...

2N IP Verso Wiegand Interface Module The 2N IP Verso Wiegand module connects a modular 2N intercom to other systems through a Wiegand interface. It is a way to pass credentials or door events between...

2N Magnetic Door Contact for Intercoms The 2N Magnetic Door Contact is a door-mounted sensor set that tells a 2N intercom whether the door is closed. Used where the intercom guards the entrance, it...

2N Mifare Classic 1K RFID Card 13.56 MHz The 2N Mifare Classic 1K RFID Card is a plain 13.56 MHz contactless card that you enroll as a credential for 2N intercoms and readers. It carries a small 2N...

2N Mifare Classic 1K RFID Key Fob 13.56 MHz The 2N Mifare Classic 1K RFID Key Fob puts a 13.56 MHz credential on a key ring, for people who would rather tap a fob than carry a card. It uses Mifare...