2N

2N PoE+ (802.3at) Injector The 2N PoE+ injector (Tenda PoE30G-A) adds IEEE 802.3at power to a network cable run, for devices that need PoE but connect to a switch without it. It is a small...

2N Retrofit Intercom Cover Plate Large The 2N Retrofit Intercom Cover Plate Large is the biggest surface-mount plate in the range, made for retrofits where several modules or frames come out at once...

2N Retrofit Intercom Cover Plate Medium The 2N Retrofit Intercom Cover Plate Medium is a surface-mount plate for retrofit jobs where the old intercom left a wider wall opening. It targets...

2N Retrofit Intercom Cover Plate Small The 2N Retrofit Intercom Cover Plate Small is a surface-mount plate that hides the opening left behind when a larger legacy intercom is replaced by a more...

2N USB RFID Card Reader 125 kHz The 2N USB RFID Card Reader 125 kHz is a desktop enrollment reader for EM41xx proximity cards. Plug it into a PC and use it to read card numbers into a 2N system...

2N Verso/Solo 2-Pin Terminal Block, 10-Pack This pack holds ten green 2-pin terminal blocks for wiring the input and output connections of 2N IP Verso and IP Solo intercoms. They are spare connectors...

2N Verso/Solo 3-Pin Terminal Block, 10-Pack This pack holds ten green 3-pin terminal blocks for wiring the relay and 12 V input connections of 2N IP Verso and IP Solo intercoms. They are spare...

2N 2Wire Set with US Power Lead The 2N 2Wire set carries Ethernet, PoE and power over an existing two-wire run. It contains two converter units: one goes at the IP device, the other near the indoor...

2N Additional Switch with Tamper Switch for IP Force and IP Safety The 2N Additional Switch with Tamper Switch is a plug-in board that gives a 2N IP Force or IP Safety intercom a second relay, a...

2N Brick Flush Mounting Box for IP Force and IP Safety The 2N Brick Flush Mounting Box is an in-wall box that lets a 2N IP Force, IP Force 2.0 or IP Safety intercom be recessed into a hollow brick...

2N EM4100 125 kHz RFID Proximity Card The 2N EM4100 125 kHz RFID Proximity Card is a plastic access card for readers that work at 125 kHz. It is the low-frequency credential in 2N’s accessory range,...

2N EM4100 125 kHz RFID Proximity Key Fob The 2N EM4100 125 kHz RFID Proximity Key Fob is a key-ring credential for readers that work at 125 kHz. It is the fob counterpart of the 125 kHz EM4100 card,...