Pelco USB-AC56-NA-MSI-B Wi-Fi USB Adapter Install Kit, North America

Pelco USB-AC56-NA-MSI-B Wi-Fi USB Adapter Install Kit, North America

The Pelco USB-AC56-NA-MSI-B is the North American Wi-Fi USB adapter install kit for setting up Pelco cameras from a mobile device. Plug it into the camera USB port and the adapter broadcasts a Wi-Fi signal, so an installer can open the camera mobile web interface at camera.lan to assign an IP address, view live video and aim the camera without a laptop on the network. Pelco lists the kit for Sarix Pro 4, Sarix Enhanced 4 and 4P, Sarix Thermal Enhanced 4, Sarix Enhanced Duo and Sarix Multi Enhanced cameras. Sarix Enhanced 4 cameras use the CBLKIT-1011 USB-C adapter cable.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Using the adapter

Attach the adapter to the camera USB port, connect a phone or tablet to the Wi-Fi signal it broadcasts, then browse to http://camera.lan. While the adapter is plugged in, the camera reserves the 10.11.22.32/28 subnet for internal use.

Compatible Cameras

• Pelco Sarix Enhanced 4P SRXE4P-2-IBX-1-B 2MP Indoor Box Camera
• Pelco Sarix Enhanced 4P SRXE4P-4-IBX-1-B 4MP Indoor Box Camera
• Pelco Sarix Enhanced 4P SRXE4P-8-IBX-1-B 8MP Indoor Box Camera
• Pelco Sarix Enhanced Duo SBDE1-10V7-E2H-IR 2x 5MP Dual-Sensor Camera
• Pelco Sarix Enhanced Duo SBDE1-16V7-E2H-IR 2x 8MP Dual-Sensor Camera
• Pelco Sarix Enhanced Duo SBDE1-6V7-E2H-IR 2x 3MP Dual-Sensor Camera
• Pelco Sarix Multi Enhanced SMLE1-12V5-4H-B 4x 3MP Multisensor Camera
• Pelco Sarix Multi Enhanced SMLE1-15V5-3H-B 3x 5MP Multisensor Camera
• Pelco Sarix Multi Enhanced SMLE1-9V5-3H-B 3x 3MP Multisensor Camera
• Pelco Sarix Thermal Enhanced 4 SXTE4-QF04-EBT-B QVGA 4.3mm Thermal
• Pelco Sarix Thermal Enhanced 4 SXTE4-QF09-EBT-B QVGA 9.1mm Thermal
• Pelco Sarix Thermal Enhanced 4 SXTE4-QF18-EBT-B QVGA 18mm Thermal
• Pelco Sarix Thermal Enhanced 4 SXTE4-VF24-EBT-B VGA 24.3mm Thermal
• Pelco Sarix Thermal Enhanced 4 SXTE4-VF36-EBT-B VGA 36mm Thermal

Pelco also lists the Wi-Fi install kit for other Sarix Pro 4, Sarix Enhanced 4 and Sarix Enhanced 4P dome and bullet models.

Related Products

• Pelco CBLKIT-1011 USB-C to USB-A Adapter Cable
• Pelco SLSPCIL-1001 In-Ceiling Adapter for Sarix Pro 4
• Pelco CRNMT-1001 Corner Mount Adapter
• Avigilon WLMT-1021 20 cm Pendant Wall Arm for H6A Dome Cameras
• Avigilon POE60U-1BTE 60 W Gigabit 802.3bt PoE Injector

Explore More

• Shop Antennas at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco USB-AC56-NA-MSI-B

What does the USB-AC56-NA-MSI-B do?

It plugs into the camera USB port and broadcasts a Wi-Fi signal so you can configure the camera from a phone or tablet.

How do I reach the camera once connected?

Join the adapter Wi-Fi network and open http://camera.lan to reach the camera mobile web interface.

Which cameras support it?

Pelco lists the Wi-Fi install kit for Sarix Pro 4, Sarix Enhanced 4 and 4P, Sarix Thermal Enhanced 4, Sarix Enhanced Duo and Sarix Multi Enhanced cameras.

Do I need an adapter cable?

Sarix Enhanced 4 cameras use the CBLKIT-1011 USB-C to USB-A adapter cable with this kit.

Does it affect the camera network settings?

While the adapter is plugged in, the camera reserves the 10.11.22.32/28 subnet for internal use.

Is there a version for Europe?

Yes. Pelco offers the USB-AC56-EU-MSI for Europe; this kit is the North American version.