Pelco HEG47K2A000 HEG 450 mm Camera Housing, 12VDC/24VAC Heater

Pelco HEG47K2A000 HEG 450 mm Camera Housing, 12VDC/24VAC Heater

The Pelco HEG47K2A000 is an HEG large-sized aluminum camera housing, 450 mm (18 in) long, with sunshield and a built-in 12 vdc/24 vac heater. Designed for 1/2, 1/3 and 1/4-in box cameras with large lenses, it is rated IP66/IP67 and keeps the camera running from -20 to 60 C (-4 to 140 F). The body slides off the internal sled for installation and service, and the housing accepts the VIP6A1 or VIP6A2 wiper and WAS or WASPT washer systems for road and city monitoring.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Installation and options

Cables enter through three M16 glands, or use the OHEGBB junction box for sheathed wiring. Mount the HEG with the WBJA wall bracket or WFWCA column bracket, adding WSFPA or DBHWGC for poles, WCWA for corners and WCPA for weak walls. Options include VIP6A1 (230 VAC) or VIP6A2 (24 VAC) wipers, WAS and WASPT washer pumps, the DTWRX wiper/washer control board, OHEPS19B camera power supply (100-240 VAC in, 12 VDC out) and the OSUPPIR IRH illuminator bracket.

Related Products

• Pelco HEG47K1A000 HEG 450 mm Housing, 120/230 VAC
• Pelco HEG37K2A000 HEG 365 mm Housing, 12/24 V Heater
• Pelco WBJA Housing Wall Bracket
• Pelco WFWCA Column/Parapet Bracket
• Pelco VIP6A2 Wiper Kit for HEG, 24 VAC
• Pelco DTWRX Wiper/Washer Control Board

Explore More

• Shop Housings and Mounts at Affinitech Store
• Browse all Network Camera Accessories at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco HEG47K2A000

What heater does the HEG47K2A000 have?

It has a built-in 12 vdc/24 vac heater, 20 W max, that switches on at 15 C and off at 22 C (+/-3 C). Supply current is 12 VDC 1.6 A max; 24 VAC 0.85 A max, 50/60 Hz.

What cameras fit in the HEG housing?

Box cameras of 1/2, 1/3 or 1/4-in format with large lenses, within 134 x 88 mm (5.3 x 3.4 in) (W x H) and 450 mm (18 in) long, or 363 mm (14 in) with internal accessories fitted.

Can I add a wiper and washer?

Yes. The HEG accepts the VIP6A1 (230 VAC) or VIP6A2 (24 VAC) wiper kit and the WAS or WASPT washer pumps; the DTWRX board adds RS-485 wiper and washer control to WASPT pumps.

Is it rated for outdoor use?

Yes. It is IP66/IP67 with cable glands, salt-fog resistant to 1000 hours (ISO 9227), and operates from -20 to 60 C (-4 to 140 F).

Does it include camera power?

No. Camera power is optional, for example the OHEPS19B wide-range supply (100-240 VAC in, 12 VDC 1.25 A out) or the OHEPS20 transformer (230 VAC in, 24 VAC out).

Which brackets fit?

Pelco lists the WBJA wall bracket and WFWCA column bracket, the WSFPA and DBHWGC pole adapters, the WCWA corner adapter and the WCPA reinforcing plate. Brackets are sold separately.