Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3 2MP 30x Explosion-Proof IR PTZ

Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3 2MP 30x Explosion-Proof IR PTZ Camera

The Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3 is a 2MP 30x explosion-proof PTZ camera with a built-in 850 nm IR illuminator reaching 150 m in a lightweight copper-free aluminum housing, powered from 100-240 VAC. It is cULus listed for Class I Zone 1 and Class I/II Division 2 hazardous locations, adds Smart Analytics with auto-tracking, and costs less than stainless steel models, for inland oil and gas, agriculture, manufacturing and chemical sites.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Why Choose the Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3?

• 2MP at up to 60 fps with 30x optical zoom
• Lightweight aluminum housing for inland sites
• 850 nm IR with SPOT and WIDE beams to 150 m
• cULus, ATEX, IECEx, INMETRO, UKEx, KCs, TS mark and CCoE-PESO certifications
• Smart Analytics with auto-tracking
• Wiper and integrated 24 VDC washer supply
• IP69, Type 4X and 6P
• SFP slot for fiber

Certified for Hazardous Locations

cULus (E319666) listings cover Class I, Zone 1 AEx db IIC T6 (to +60°C) or IIB+H2 T5 (to +70°C), Zone 21 AEx tb IIIC, Class I Division 2 and Class II Division 2. ATEX, IECEx, UKEx, INMETRO, KCs, TS mark and CCoE-PESO also apply.

Imaging

A 1/2.8-inch CMOS sensor and F1.6 4.3-129 mm lens deliver 1945 x 1097 at up to 60 fps from 65.1° to 2.34°, with up to 120 dB WDR, EIS and digital defog. Eleven 850 nm LEDs provide SPOT (13°) and WIDE (40° x 16°) beams to 150 m.

Smart Analytics

Pelco Smart Analytics classifies people and vehicles with events for objects in area, object loitering, objects crossing beam, object appears or enters area, object not present, objects enter or leave area, object stops in area, direction violated and sabotage detection, plus auto-tracking. 500 presets and 10 tours.

Installation

It runs on 100-240 VAC (1.2 A, 100 W max) with two 3/4-inch NPT entries, RJ45 and SFP ports, a wiper and a 24 VDC washer supply, and weighs 25.4 kg (56 lb). Pan and tilt operate in winds up to 130 km/h.

Typical Applications

• Inland oil and gas sites
• Agriculture and grain handling
• Manufacturing plants
• Chemical facilities
• Fuel and tank farms

Compatible Accessories

Accessories Pelco lists for the Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3. Linked items are available at Affinitech Store; contact us for the others:

• Pelco ExSite Pro wall, parapet, pole and corner mounts
• Pelco explosion-proof washer kit
• Pelco OEXPLUG3/4P blanking plug
• Pelco XWBA Stainless Steel Wall Bracket for ExSite Pro PTZ
• Pelco XWBTA Stainless Parapet/Ceiling Bracket for ExSite Pro PTZ

Compare Pelco ExSite Pro Cameras

Explore More

• Browse all Explosion-Protected Cameras at Affinitech Store
• Shop PTZ Cameras at Affinitech Store
• Shop Outdoor Cameras at Affinitech Store
• Shop IR Cameras at Affinitech Store
• Shop AI Cameras at Affinitech Store
• See all Pelco products at Affinitech Store

Frequently Asked Questions About the Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3

What is the Pelco ExSite Pro EXLP1-2X30-EPT-85B0M3?

A 2MP 30x explosion-proof IR PTZ camera in an aluminum housing from Pelco's ExSite Pro Series.

How is it powered?

100 to 240 VAC, 1.2 A, 50/60 Hz; 100 W max.

Where can it be installed?

cULus listed for Class I, Zone 1 (AEx db IIC T6 or IIB+H2 T5), Zone 21 (AEx tb IIIC), Class I Division 2 and Class II Division 2.

How far does the IR reach?

Up to 150 m with SPOT and WIDE 850 nm beams.

How does it differ from the ExSite Enhanced 2 PTZ?

ExSite Pro uses a lighter, lower-cost aluminum housing for inland sites; ExSite Enhanced 2 uses AISI 316L stainless steel for corrosive and offshore locations.

What is the operating temperature?

-40°C to +60°C with heater and fan.

What warranty does it have?

A 3-year limited warranty, with a 5-year extended warranty available.