Pelco CM400 Corner Mount Adapter for IWM Spectra Wall Mounts, Gray
Description
Pelco CM400 Corner Mount Adapter for IWM Spectra Wall Mounts, Gray
The Pelco CM400 is a gray corner mount adapter that lets you install an IWM Series wall mount and Spectra pendant PTZ dome on the outside corner of a building. The aluminum adapter supports up to 75 lb, has a cable feedthrough hole for video and power wiring, and includes a block-off plate for non-feedthrough outdoor installs. It pairs with the IWM-GY and IWM24-GY wall mounts.
Key Specifications
| Part number | CM400 |
| Type | Corner mount adapter |
| Compatible with | IWM, IWM24, IDM4018 and LWM41 wall mounts |
| Material / finish | 6061-T6 aluminum, gray powder coat |
| Maximum load | 75 lb (34 kg) |
| Unit weight | 3.0 lb |
| Included | Mounting studs, nuts, split lock washers, block-off plate |
| Compliance | NDAA compliant |
Full specifications are listed in the Detailed Specifications tab.
Installation
Fasten the adapter to the building corner with eight fasteners suited to the surface (minimum 1/4-inch, not supplied), then bolt the IWM wall mount onto the four 5/16-inch studs with the supplied nuts and split lock washers. Use the included block-off plate when cables are not fed through the wall.
Compatible Products
- Pelco IWM-GY Wall Mount, Gray
- Pelco IWM-SR Wall Mount, Light Gray
- Pelco IWM24-GY Wall Mount with Transformer, Gray
- Pelco IWM-SW Wall Mount, White
- Pelco IDM4018 Wall Mount
- Pelco LWM41 Legacy Wall Mount
Fits all IWM and IWM24 Series wall mounts, the IDM4018, and the LWM41 for Legacy positioning systems.
Related Products
- Pelco CM400-SW Corner Mount Adapter, White
- Pelco PA402 Pole Mount Adapter
- Pelco IWM-GY Wall Mount, Gray
- Pelco IWM24-GY Wall Mount with Transformer
- Pelco IWM-SR Wall Mount, Light Gray
Explore More
- Shop Housings and Mounts at Affinitech Store
- Browse all Network Camera Accessories at Affinitech Store
- See all Pelco products at Affinitech Store
Frequently Asked Questions About the Pelco CM400
What does the CM400 attach to?
It is an adapter for Pelco IWM Series and IWM24 Series wall mounts, the IDM4018 and the Legacy LWM41. The wall mount bolts to the adapter's four 5/16-inch studs.
How much weight can it hold?
The CM400 supports up to 75 lb (34 kg).
What surface does it mount to?
It mounts on an outside building corner using eight fasteners suited to the surface, minimum 1/4-inch, which are not supplied.
What is included?
Four 5/16-inch mounting studs with nuts and split lock washers and a block-off plate.
Do I still need a wall mount?
Yes. The CM400 is an adapter only. Order an IWM Series wall mount such as the IWM-GY, which holds the pendant dome.
Detailed Specifications
Pelco CM400 Specifications
| Specification | Details |
|---|---|
| Model | |
| Model | CM400 |
| Description | Corner mount adapter for IWM Series, IDM4018 and LWM41 wall mounts |
| Mechanical | |
| Adapter mounting | Four 5/16-inch mounting studs (nuts and split lock washers supplied) |
| Mounting method | Eight fasteners suitable for the surface (minimum 1/4-inch recommended, not supplied) |
| General | |
| Construction | 6061-T6 aluminum, 0.125 in (3.18 mm) thick |
| Finish | Gray polyester powder coat |
| Maximum load | 75 lb (34 kg) |
| Unit weight | 3 lb (1.36 kg) |
| Shipping weight | 8 lb (3.62 kg) |
| Compatibility | |
| Wall mounts | IWM Series, IWM24 Series, IDM4018 (Spectra, DF5, DF8 pendant domes); LWM41 (Legacy positioning systems) |
| Other | EA4348 adapter plate allows an EWM wall mount for Esprit |
| Parts Included | |
| Hardware | Four 5/16-inch studs, nuts, split lock washers |
| Block-off plate | Included |
| Certifications | |
| NDAA | Compliant |