AXIS T8129-E IP66/IP67 Outdoor PoE Extender, 01148-001
Description
AXIS T8129-E IP66/IP67 Outdoor PoE Extender
The AXIS T8129-E Outdoor PoE Extender is a weatherproof repeater that lets a camera sit farther from the switch than the usual 100 m cable limit. The IP66/IP67-rated polycarbonate housing handles temperatures from -40 °C to 60 °C, so it can live in the field next to the camera. No separate power supply is needed, and depending on the midspan and camera, the total connection can reach 200 to 400 m (656 to 1312 ft).
Key Specifications
| Part number | 01148-001 |
| Type | Outdoor PoE extender (repeater) |
| PoE standards | IEEE 802.3af, IEEE 802.3at, Axis High PoE |
| Data rate | 10/100 Mbps half/full duplex |
| Enclosure | IP66/IP67-rated, PVC-free polycarbonate |
| Connectors | Shielded or unshielded RJ45 |
| Max power consumption | 1.3 W |
| Operating temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Mounting | Wall or shelf |
| Dimensions | 182.0 x 49.8 x 30.2 mm (7.17 x 1.96 x 1.19 in) |
Full specifications are listed in the Detailed Specifications tab.
Range at a Glance
| Powered device | PoE switch or 15 W midspan (802.3af) | PoE+ switch (802.3at) | 30 W midspan | 60 W midspan |
|---|---|---|---|---|
| Low power (PoE Class 1 or under 6 W) | 300 m (984 ft) | 400 m (1312 ft) | 400 m (1312 ft) | 400 m (1312 ft) |
| Medium power (PoE Class 1-2 or under 12 W) | 200 m (656 ft) | 200 m (656 ft) | 300 m (984 ft) | 300 m (984 ft) |
| Full power PoE or PoE+ (over 12 W) | Not supported | Not supported | 200 m (656 ft)* | 200 m (656 ft)* |
| Custom High PoE (60 W injector devices) | Not supported | Not supported | Not supported | 200 m (656 ft)* |
Distances are the maximum from the network switch when one extender is added for every 100 m (328 ft), over 24 AWG or heavier Cat 5e or Cat 6 cable. * Use 23 AWG or heavier cable (typically Cat 6). Actual figures depend on operating conditions.
Related Products
Related AXIS accessories, available at Affinitech Store:
- AXIS 30 W 1-Port PoE+ Gigabit Midspan
- AXIS TU8006 60 W PoE Midspan
- AXIS T8134 60 W Midspan
- AXIS T8129 Indoor PoE Extender
- AXIS T8061 Outdoor Ethernet Surge Protector
- AXIS TU8001 Ethernet Surge Protector
Explore More
- Browse all PoE Devices at Affinitech Store
- See every Network Camera Accessory we carry
- Shop more AXIS products at Affinitech Store
Frequently Asked Questions About AXIS T8129-E
What is the AXIS T8129-E for?
It repeats the Ethernet data signal and forwards PoE so an outdoor camera can be mounted beyond the 100 m limit, without adding a power supply near the camera.
How weatherproof is it?
The casing is IP66/IP67-rated polycarbonate and the unit operates from -40 °C to 60 °C (-40 °F to 140 °F).
How far can it extend a connection?
Depending on the midspan and camera, the total connection can be 200 to 400 m (656 to 1312 ft). A 25 W PTZ dome camera can sit 200 m away with one extender, and a 5 W camera can reach 400 m with three extenders at 100 m intervals.
Which PoE standards does it pass through?
IEEE 802.3af, IEEE 802.3at and Axis High PoE 60 W.
Does it support Gigabit Ethernet?
No. The datasheet lists a 10/100 Mbps half/full duplex data rate.
Can the RJ45 cabling be unshielded?
Yes, the datasheet allows shielded or unshielded RJ45 connectors and Cat 5 or higher cable.
Detailed Specifications
AXIS T8129-E Specifications
| Specification | Details |
|---|---|
| Product | |
| Model | AXIS T8129-E Outdoor PoE Extender |
| Category | PoE extenders |
| Part number | 01148-001 |
| Data & Power | |
| Data rate | 10/100 Mbps half/full duplex |
| Maximum distance (IEEE 802.3at) | 200 m (656 ft) |
| Maximum distance (IEEE 802.3af) | 300 m (984 ft) with 2 units |
| Note | The maximum distance depends on the connected product, power source and operating conditions |
| Connectors | Shielded or unshielded RJ45, EIA 568A and 568B |
| Network cables | Shielded or unshielded category 5 (or higher) |
| Maximum power consumption | 1.3 W |
| Installation and Management | |
| Installation | Plug-and-play; automatically forwards in-line power to PoE and High PoE-enabled devices |
| General | |
| Casing | IP66/IP67-rated; PVC-free polycarbonate |
| Display and indicators | LED indicators on the RJ45 connector: power (PoE enabled, green) and network (link/activity, yellow) |
| Compliance | IEEE 802.3af, IEEE 802.3at, Axis High PoE, RoHS, WEEE, CE |
| Mounting | Wall or shelf |
| Environment | Outdoor |
| Operating conditions | -40 °C to 60 °C (-40 °F to 140 °F); humidity 0 to 85% RH (non-condensing) |
| Approvals | |
| EMC | EN 55032 Class B, EN 55024, FCC Part 15 Subpart B Class B, ICES-3(A)/NMB-3(A), VCCI Class B, RCM AS/NZS CISPR 32 Class B, KC KN32 Class A, KC KN35 |
| Safety | IEC/EN/UL 62368-1 |
| Dimensions and Weight | |
| Dimensions | 182.0 x 49.8 x 30.2 mm (7.17 x 1.96 x 1.19 in) |
| Weight | 180 g (6.35 oz) |
| Warranty | |
| Warranty | 3-year warranty (Axis datasheet) |
| Shipping | |
| Shipping weight | 0.39 lb |
| Shipping dimensions (W x D x H) | 3.35 x 5.91 x 1.57 in |