2N IP Force 125 kHz RFID Card Reader, 03036-001

2N IP Force 125 kHz RFID Card Reader

The 2N IP Force 125 kHz RFID Card Reader is an internal module that lets a first-generation 2N IP Force intercom read 125 kHz proximity cards. It mounts inside the intercom, so the entrance needs no extra reader on the wall. This is a discontinued first-generation part, and 2N has replaced it for the IP Force 2.0.

Key Specifications

Full specifications are listed in the Detailed Specifications tab.

Module Fitting Notes

• This is an internal module that fits inside the intercom housing, so no separate reader unit is needed on the wall.
• Per the 2N installation manual, only one of the extension modules (additional switch or internal RFID reader) can be used in the intercom at a time.
• The tamper switch on the module signals when the front panel is opened.

Compatible Products

The reader modules fit the two-button and pictogram versions of the first-generation IP Force: 2N names the 2N IP Force 1-Button with HD Camera and Pictograms, 1-Button with Pictograms, 2-Button with HD Camera and 2-Button Audio versions. Compatible 2N products available at Affinitech Store:

• 2N IP Force 1-Button Intercom with HD Camera and Pictograms (01334-001)
• 2N IP Force 1-Button Intercom with Pictograms (01335-001)
• 2N IP Force 2-Button Intercom with HD Camera, Reader Ready (01340-001)
• 2N IP Force 2-Button Audio Intercom, Reader Ready (01341-001)

Related Products

Related 2N products available at Affinitech Store:

• 2N IP Force 125 kHz RFID Card Reader (01344-001)
• 2N IP Force/Safety Additional Switch and Tamper (01350-001)
• 2N Security Relay (01386-001)
• 2N IP Force/Safety Gooseneck Stand (01351-001)

Explore More

• Browse all Network Door Stations and Intercoms at Affinitech Store
• See the full Access Control collection

Frequently Asked Questions About 2N IP Force 125 kHz RFID Card Reader

What does the 2N IP Force 125 kHz reader read?

It reads 125 kHz proximity cards. 2N lists the card families EM4100, EM4102 and HID Prox for its 125 kHz IP Force readers.

Does it use Wiegand or OSDP?

2N sold a Wiegand 125 kHz reader (9151011) and an OSDP one (9151022) for the IP Force. Our product data does not say which of these this order number is, so confirm with us if the interface matters. For a known OSDP version see 03228-001.

Which intercoms does it fit?

It fits the two-button and pictogram versions of the first-generation 2N IP Force. It does not fit the IP Force 2.0.

Can I combine it with the additional switch module?

No. The 2N installation manual allows only one extension module, an additional switch or an internal RFID reader, at a time.

Is this reader still sold?

Axis product data marks it as discontinued, and 2N has ended sales of the first-generation IP Force. Axis lists 03355-001 as the replacement for the IP Force 2.0.